Can-Am X3 MG1 2021+ Rolling Launch Control

Turn the vehicle on, switch the drive mode over to “ECO MODE”

While driving at approximately 10mph:

• Option 1: Press the brake pedal enough to activate the brake switch (taillights will luminate). DO NOT push the brake pedal to the floor.
• Option 2 (Recommended): Hold down the steering wheel push button (this will activate the brake switch and luminate the taillights).

Press the gas pedal to the floor. The engine should hold about 4500-5000rpms. As soon as you start to hear the ignition cut (popping sound) approximately 1-3 seconds, let off the brake or release the push button. Keeping the throttle pedal to the floor.

Once you are finished racing, switch the engine mode back to “Sport Mode”. Rolling launch is always active in “ECO mode” and is only designed to be used for roll on racing. You may harm the engine or have other undesirable consequences if it is left on all the time.

• Use with caution and do not let inexperienced drivers use the vehicle.
• We have designed our rolling launch to only be active in ECO mode. This way it is separated from the normal EVP Launch Control. ECO mode now behaves like SPORT mode except when you press the button or brake and are on the gas at the same time. ECO with rolling launch would only be used for heads up rolling drag racing. After the race, you would switch back to Sport Mode for normal operation or to use EVP Launch Control for drag racing from a standstill.