Polaris XP Turbo & Pro XP Boost Recirculation Valve Kit (BRV)
XP Turbo & Pro XP Boost Recirculation Valve Kit (BRV)
In the box
Parts and tools
Included parts
- 1EVP Boost Recirculation Valve
- 220-32mm Hose Clamps
- 110mm Pinch Clamp
Required tools
- Diagonal Pliers
- Flat Head Screwdriver
Procedure
Installation Steps
- Step 1
Remove the rear access panel to the top of the engine.
- Step 2
Using the Diagonal Pliers, remove the OEM clamps that secure the factory diverter valve to the charge tube and recirculation hose.
CautionDo not damage the OEM hose or port.
- Step 3
Discard clamps.
- Step 4
Remove OEM Boost Recirculation Valve (BRV) from the charge tubes and recirculation hose. Using a flathead screwdriver, remove the hose from the OEM BRV.
- Step 5
Install the vacuum hose onto the new EVP Boost Recirculation Valve (BRV) and secure the hose with the 10mm pinch clamp provided. Install the (BRV) into the charge tube and recirculation hose in the same orientation as the OEM BRV. See Picture Below.
- Step 6
Once the new EVP (BRV) is seated all the way into the respective port/hose, tighten both 20-32mm hose clamps.
Need technical support?
Submit a ticket with your vehicle and what you're seeing, and our support team will get back to you.
BUY NOW, PAY LATER. Starting at 0% APR 