Can-Am X3 Magnum Slip-On Exhaust

Installation instructions for the X3 Magnum Slip-On Exhaust on the Can-Am Maverick X3 (SKU 300DC0013). Parts, tools, and full procedure.

Category
Exhaust
Legacy SKU
300DC0013
Revision
Rev_021121

In the box

Parts and tools

Included parts

  • 1EVP Magnum Slip-On

Required tools

  • T-30 Torx
  • Spring Puller

Procedure

Installation Steps

  1. Step 1

    Remove the rear valance from your X3. The panel is mounted using (5) Torx bolts, three along the top and two on the bottom.

  2. Step 2

    Remove the (4) muffler springs (left image), using a spring puller is recommended. Remove the muffler by taking out the four mounting bolts (right images).

    Remove the (4) muffler springs (left image), using a spring puller is recommended.
    Remove the muffler by taking out the four mounting bolts (right images).
    Remove the muffler by taking out the four mounting bolts (right images).
  3. Step 3

    Install and mount the Slip-on exhaust with the bolts loosely installed then hook up all four springs. Keep the bolts loose until the rear valance is reinstalled.

  4. Step 4

    Attach the rear valance with the (5) T-30 Torx bolts. Center the exhaust pipe in the hole of the rear valance and tighten all bolts. Installation of the Slip-On Muffler is complete.

Emissions notice. This product is exempt from the emission standards and related requirements of 40 C.F.R. § 1051 as provided by 40 C.F.R. § 1051.620, and California law [e.g., vehicle code §§ 27156 and 38391]. This product is sold only for use in connection with EPA certified, purpose-built, nonroad vehicles used solely for closed course, nonroad competition/racing and not used for any recreational purpose or on public highways or right of ways maintained by and open to the public. This product is sold only in connection with machines that do not fall under state and/or federal noise or emission standards/regulations. Purchasers who/that purchase this product represent and warrant that the product is purchased only in connection with EPA-certified, emission-regulations-exempt and noise-regulations-exempt competition/racing vehicles as interpreted under applicable state and/or federal law.

Need technical support?

Submit a ticket with your vehicle and what you're seeing, and our support team will get back to you.

Contact Support
We use cookies to improve your experience on our website. Read about how we use cookies in our Privacy Policy. By browsing this website, you agree to our use of cookies. privacy policy
accept

Your cart

×
×