BUY NOW, PAY LATER. Starting at 0% APR 
Can-Am X3 Billet Fuel Rail
X3 Billet Fuel Rail
In the box
Parts and tools
Included parts
- 1X3 Fuel Rail
- 3Injector Clip
- 6Socket Cap Screws
- 18AN ORB Plug
- 4Zip Tie
- Optional: 8AN ORB to 8AN Fitting
- Optional: BRP OEM Quick Fitting
Required tools
- Torx Sockets
- Metric Wrench
- Fuel Rail Tool (953RU0662)
Procedure
Installation
- Step 1
With brake cleaner, spray around all (3) injector ports and fuel rail. Wipe debris away with a rag. Use the EVP or BRP fuel rail tool to properly remove the fuel line from the rail. Insert the tool between the fuel line and fuel rail. DO NOT USE A SCREWDRIVER.
- Step 2
Unplug each injector clip. With a T30 remove the fuel rail screws.
- Step 3
Remove the injector clips, remove the injectors. Blow out the fuel rail with all injectors removed.
- Step 4
Install the (3) injectors. Apply dielectric grease to the O-ring on the injector. Install the new injector clip around the injector, use supplied hardware with BLUE Loctite. Make sure the injector is properly seated.
- Step 5
Install the plug (if you are NOT running a return style fuel system) apply dielectric on the O-ring. Install the correct fuel line connector either OEM or -6an.
- Step 6
Install the fuel rail and injectors into the intake. Torque screws to 80 in-lbs. Reinstall the fuel line. You will hear it snap into place. Make sure it is seated properly.
- Step 7
Reinstall the injector connectors.
Need technical support?
Submit a ticket with your vehicle and what you're seeing, and our support team will get back to you.
