BUY NOW, PAY LATER. Starting at 0% APR 
BOSCH LSU4.9 Wideband Oxygen Sensor
Installation instructions for the BOSCH LSU4.9 Wideband Oxygen Sensor on the (SKU 710FU0015). Parts, tools, and full procedure.
In the box
Parts and tools
Included parts
- 1BOSCH 02 Sensor
- 2Crush Washer
Required tools
- 22mm Open End Wrench
Procedure
Installation Steps
- Step 1
Unplug the six-pin connector from the car.
- Step 2
Loosen the 02 sensor out of the exhaust with a 22mm open end wrench.
- Step 3
Install the new BOSCH 02 sensor into the exhaust. Anti-seize is already on the new threads. Tighten down with 22mm wrench.
- Step 4
Reconnect the six-pin connector back into the car.
Emissions notice. This product is exempt from the emission standards and related requirements of 40 C.F.R. § 1051 as provided by 40 C.F.R. § 1051.620, and California law [e.g., vehicle code §§ 27156 and 38391]. This product is sold only for use in connection with EPA certified, purpose-built, nonroad vehicles used solely for closed course, nonroad competition/racing and not used for any recreational purpose or on public highways or right of ways maintained by and open to the public. This product is sold only in connection with machines that do not fall under state and/or federal noise or emission standards/regulations. Purchasers who/that purchase this product represent and warrant that the product is purchased only in connection with EPA-certified, emission-regulations-exempt and noise-regulations-exempt competition/racing vehicles as interpreted under applicable state and/or federal law.
Need technical support?
Submit a ticket with your vehicle and what you're seeing, and our support team will get back to you.
