BUY NOW, PAY LATER. Starting at 0% APR 
Sea Doo GTR 230-300 & RXP/RXT 325 Resonator Delete
Installation instructions for the Sea Doo GTR 230-300 & RXP/RXT 325 Resonator Delete on the Sea-Doo Sea-Doo. Parts, tools, and full procedure.
In the box
Parts and tools
Included parts
- 1Resonator Delete Silicone
- 1Plug
- 1Pinch Clamp
Required tools
- 6, 8mm Socket
- Screw Driver
- Cutting Tool
Procedure
Installation
- Step 1
Remove seat. Remove the central intake tube by loosening (2) 8mm hose clamps and (2) rubber straps.
- Step 2
Remove the hose clamp holding the diverter valve to the intake tube. Remove the valve.
- Step 3
Loosen the clamp on the intake tube holding it onto the compressor.
- Step 4
Cut the zip tie holding the resonator hose and water line bracket.
- Step 5
Remove (2) 8mm hose clamps holding the resonator hose to the water box and resonator.
- Step 6
Cut (4) zip ties and remove the rubber strap.
- Step 7
Remove the (2) 8mm clamps on the 90 degree elbow, slide resonator up.
- Step 8
Remove (3) water lines from the intercooler. Also remove both charge tubes from the intercooler.
- Step 9
Remove (2) rubber straps holding the intercooler in place.
- Step 10
Remove the intercooler.
- Step 11
Remove the rubber grommet from the top of the resonator. Remove resonator.
- Step 12
Remove the resonator rubber mat and 90-degree elbow from the hull.
- Step 13
Install the new free flowing exhaust tube from the water box to the hull exit coupler. Reuse (2) 8mm hose clamps.
- Step 14
Reinstall the intercooler, (2) rubber straps, (2) charge tubes, and (3) water lines.
- Step 15
Zip tie (2) clear venturi tubes loosely to the free-flowing exhaust.
- Step 16
Zip tie the hose bracket to the free-flowing exhaust.
Need technical support?
Submit a ticket with your vehicle and what you're seeing, and our support team will get back to you.
