Polaris RZR 200 Front Bumper Kit

Installation instructions for the RZR 200 Front Bumper Kit on the Polaris RZR (SKU 925FP0200 (black)). Parts, tools, and full procedure.

Vehicles
Polaris RZR
Legacy SKU
925FP0200
Revision
Rev_021623

In the box

Parts and tools

RZR 200 Front Bumper Kit

Included parts

  • 1Front Bumper
  • 1Backer Plate
  • 1Lower Plate
  • 1Hardware Kit

Required tools

  • T-40 Socket
  • 1/16”, 1/4" Allen Wrench
  • 1/4" Socket
  • 14mm Socket

Procedure

Installation

  1. Step 1

    Install the backing plate to the lower plate. Use supplied hardware.

    Install the backing plate to the lower plate. Use supplied hardware.
  2. Step 2

    Install the lower plate to the front bumper. Use supplied bevel washers and Allen screws.

    Install the lower plate to the front bumper. Use supplied bevel washers and Allen screws.
  3. Step 3

    Remove (2) screws holding the front clip on. Use a T-40 socket.

    Remove (2) screws holding the front clip on. Use a T-40 socket.
  4. Step 4

    Install the bumper support behind the front clip, make sure the bend goes underneath the brake block. Reinstall the OEM hardware.

    Install the bumper support behind the front clip, make sure the bend goes underneath the brake block. Reinstall the OEM hardware.
  5. Step 5

    Remove (2) screws underneath the car where the front clip attaches.

    Remove (2) screws underneath the car where the front clip attaches.
  6. Step 6

    Install the bumper onto the car. Reuse the bottom two screws to mount the bumper to the frame. Use (2) supplied bolts and washers to mount the bumper to the support in the front of the car.

    Install the bumper onto the car.
RZR 200 Front Bumper Kit
Emissions notice. This product is exempt from the emission standards and related requirements of 40 C.F.R. § 1051 as provided by 40 C.F.R. § 1051.620, and California law [e.g., vehicle code §§ 27156 and 38391]. This product is sold only for use in connection with EPA certified, purpose-built, nonroad vehicles used solely for closed course, nonroad competition/racing and not used for any recreational purpose or on public highways or right of ways maintained by and open to the public. This product is sold only in connection with machines that do not fall under state and/or federal noise or emission standards/regulations. Purchasers who/that purchase this product represent and warrant that the product is purchased only in connection with EPA-certified, emission-regulations-exempt and noise-regulations-exempt competition/racing vehicles as interpreted under applicable state and/or federal law.

Need technical support?

Submit a ticket with your vehicle and what you're seeing, and our support team will get back to you.

Contact Support
We use cookies to improve your experience on our website. Read about how we use cookies in our Privacy Policy. By browsing this website, you agree to our use of cookies. privacy policy
accept

Your cart

×
×