BUY NOW, PAY LATER. Starting at 0% APR 
Polaris RZR 200 EVP Steering Wheel Kit
Installation instructions for the RZR 200 EVP Steering Wheel Kit on the Polaris RZR (SKU 925FC0346). Parts, tools, and full procedure.
In the box
Parts and tools
Included parts
- 1EVP Steering Wheel
- 1Steering Wheel Adaptor
- 3M6x16mm Torx Screws
- 6M4 Torx Screws
Required tools
- 8mm Socket
- Blue Loctite
- Allen/torx sockets
Procedure
Installation
- Step 1
Remove the OEM steering wheel hub cap. Clip on the top.
- Step 2
Remove the (3) steering wheel screws using a 8mm socket.
- Step 3
Remove the OEM steering wheel. Install the EVP steering wheel adaptor. Use blue Loctite on the threads of the Torx flat head screws.
- Step 4
Install the steering wheel to the adaptor using supplied (6) screws. Use blue Loctite to on threads.
Emissions notice. This product is exempt from the emission standards and related requirements of 40 C.F.R. § 1051 as provided by 40 C.F.R. § 1051.620, and California law [e.g., vehicle code §§ 27156 and 38391]. This product is sold only for use in connection with EPA certified, purpose-built, nonroad vehicles used solely for closed course, nonroad competition/racing and not used for any recreational purpose or on public highways or right of ways maintained by and open to the public. This product is sold only in connection with machines that do not fall under state and/or federal noise or emission standards/regulations. Purchasers who/that purchase this product represent and warrant that the product is purchased only in connection with EPA-certified, emission-regulations-exempt and noise-regulations-exempt competition/racing vehicles as interpreted under applicable state and/or federal law.
Need technical support?
Submit a ticket with your vehicle and what you're seeing, and our support team will get back to you.
