Polaris Pro XP Shift-Tek Essential High Engagement Clutch Kit

Pro XP Shift-Tek Essential High Engagement Clutch Kit

Category
Clutching
Vehicles
Polaris RZR
SKU
Only Silver Spring (2261020003), Clutch Kit with Silver Spring (402FP0031)
Legacy SKU
402FP0029, 402FP0031
Revision
Rev_051021

In the box

Parts and tools

Included parts

  • 1Silver Primary Spring
  • 3Notched Primary Clutch Weights
  • Variety of Different Weights

Required tools

  • 10mm Socket
  • Torque Wrench
Pro XP Shift-Tek Essential High Engagement Clutch Kit
STAGE 1STAGE 2STAGE 3STAGE 2RWISTAGE 3RWISTAGE 4RWISTAGE 5RWI
Stock Primary Spring Engagement2300230023002300230023002300
Silver Primary Spring Engagement2600260026002600260026002600
Hole 10000000
Hole 2002. 3/16" ss2. 3/16" ss2. 3/16" ss2. 1/4" ss2. 1/4" ss
Hole 3002. 3/16" ss2. 3/16" ss2. 1/4" ss2. 3/8" ss2. 3/8" ss
Hole 42. 1/4" ss2. 1/4" ss2. 1/4" ss2. 1/4" ss2. 3/8" ss2. 3/8" ss2. 3/8" ss
Hole 50000002. 3/16”ss
Secondary Springstockstockstockstockstockstockstock
Helixstockstockstockstockstockstockstock
Operating RPM8400-86008400-86008400-86008400-86008400-86008400-86008400-8600
Pro XP Shift-Tek Essential High Engagement Clutch Kit

Procedure

Installation

  1. Step 1

    Remove the primary and secondary outer cover. Locate the primary clutch.

    Remove the primary and secondary outer cover. Locate the primary clutch.
  2. Step 2

    Either pull the belt and primary clutch or loosen all (6) M6 primary clutch cover bolts with the primary clutch still in the car. Only take (3) all the way out.

    OEM Black primary clutch spring on the right. Silver EVP Shift-Tek High engagement spring on the left.
    Caution

    Apply pressure to the primary clutch cover when removing the last (3) bolts.

  3. Step 3

    Place your new EVP Shift-Tek Silver Spring onto the primary clutch. If you are not changing out the OEM weights you can re-install the primary clutch cover.

    Place your new EVP Shift-Tek Silver Spring onto the primary clutch.
  4. Step 4

    Reuse the OEM (6) M6 bolts to mount the primary clutch cover.

    We recommend replacing the OEM primary clutch cover with the EVP Shift-Tek Billet Clutch Cover.
    Note

    We recommend replacing the OEM primary clutch cover with the EVP Shift-Tek Billet Clutch Cover. Sku number (401FP0014)

  5. Step 5

    Torque the M6 bolts down to 100in-lbs (8.3 ft-lbs).

When you’re done

After installation

Note
  • Silver primary spring used with stock clutch weights, engagement is 2200 RPM.
  • Silver primary spring with Shift-Tek clutch kit, engagement is 2600 RPM.
  • The silver primary spring will raise the RPM’s enough to use launch control with the stock weights, but it is not recommended.
Emissions notice. This product is exempt from the emission standards and related requirements of 40 C.F.R. § 1051 as provided by 40 C.F.R. § 1051.620, and California law [e.g., vehicle code §§ 27156 and 38391]. This product is sold only for use in connection with EPA certified, purpose-built, nonroad vehicles used solely for closed course, nonroad competition/racing and not used for any recreational purpose or on public highways or right of ways maintained by and open to the public. This product is sold only in connection with machines that do not fall under state and/or federal noise or emission standards/regulations. Purchasers who/that purchase this product represent and warrant that the product is purchased only in connection with EPA-certified, emission-regulations-exempt and noise-regulations-exempt competition/racing vehicles as interpreted under applicable state and/or federal law.

Need technical support?

Submit a ticket with your vehicle and what you're seeing, and our support team will get back to you.

Contact Support
We use cookies to improve your experience on our website. Read about how we use cookies in our Privacy Policy. By browsing this website, you agree to our use of cookies. privacy policy
accept

Your cart

×
×