Can-Am Maverick R Spark Plug

Remove the bed and intercooler / radiator wind dam.

Remove both charge tubes from the intercooler using an 11mm socket.

Remove the (1) coolant reservoir mounting screw using a 10mm socket.

Remove the coolant reservoir and bungee it up to the cage.

Remove (6) intercooler tray screws using a 10mm socket.

Behind the seats, remove (4) rubber plugs and access (4) 10mm screw. Two located behind the passenger seat and drivers seat.

Tilt the back of the intercooler upwards, unplug (2) intercooler fan connectors. Remove the intercooler from the vehicle.

With the intercooler removed you can now access the valve cover. Unplug (3) coil pack connectors, (3) T-30 screws, and remove (3) coils. With a 14mm socket loosen the spark plugs. Use a magnet to remove the plugs. Apply a small amount of anti-seize to the threads of the new plugs. Install the plugs into the head using a magnet. Torque the plugs to 124 in-lb (14 Nm).

Once complete, reinstall vehicle in reverse order.