BUY NOW, PAY LATER. Starting at 0% APR 
Kawasaki H2 Injectors
Kawasaki H2 Injectors
In the box
Parts and tools
Included parts
- 1Hardware Kit
- 3Injectors
- 3Spacers
- 3Injector gaskets
Required tools
- Screwdrivers
- Sockets
- Push dart removal tool
- Dielectric Grease (optional)
Procedure
Installation
- Step 1
Pull up and pull forward on rear seat bottom to remove, there is 4 grommets that hold front of seat down.
- Step 2
Remove shoulder belts from the lap belt buckles (6). Pull seat back forward and remove.
- Step 3
Remove the 6 bolts holding the should belts in place.
- Step 4
Remove 4 12mm bolts holding the seat bars in place and remove bars.
- Step 5
Remove Phillips screws holding ECU, Relays, and fuse boxes in place, Remove screws and darts around firewall perimeter, Use 8mm allen key to remove upper brackets. Pull forward.
- Step 6
Remove 6 bolts holding fuel rail to plenum, remove rail and grommets from plenum.
- Step 7
Using dielectric grease on O-rings insert new injectors in fuel rail, Install grommet over tip of new injectors, using supplied spacers and hardware insert spacers between fuel rail and plenum, tighten to 80inlbs
- Step 8
With fuel rail installed, install injector plug adaptors, connect injector harness, key vehicle on and check for fuel leaks.
Need technical support?
Submit a ticket with your vehicle and what you're seeing, and our support team will get back to you.
