BUY NOW, PAY LATER. Starting at 0% APR 
Kawasaki H2 Crankshaft Holding Tool
Kawasaki H2 Crankshaft Holding Tool
In the box
Parts and tools
Included parts
- 1Crankshaft Retaining Nut
- 1Crankshaft Holding Tool
- 3M8 Stud
Required tools
- Drain pan
- Rags
- Torque Wrench
Procedure
Installation
- Step 1
This tool will work with the engine installed in the car or on the bench. With the oil drained and the stator cover removed you will gain access to the flywheel. On the flywheel you will notice a few different size balance holes. The crankshaft holding tool will use these (3) holes.
- Step 2
Install the supplied nut over the flywheel bolt onto the threads of the crankshaft. This nut does not need to be torqued, just snug. You can hold the crankshaft and rotating assembly still when torquing.
Need technical support?
Submit a ticket with your vehicle and what you're seeing, and our support team will get back to you.
