CF Moto Z10 Intake Tube

CF Moto Z10 Intake Tube

Category
Intake
SKU
1782040001 (Black), 1782040002 (Orange)
Revision
REV_092326

Before you start

This port is for recirculation hose for Boost Recirculation Valve. If Blow Off Valve is used this port will be capped. This port is for Crankcase vent. If a vent to atmosphere catch can is used this port will be capped.
This port is for recirculation hose for Boost Recirculation Valve. If Blow Off Valve is used this port will be capped. This port is for Crankcase vent. If a vent to atmosphere catch can is used this port will be capped.
BOV, BRV, OEM BRV with adapter

In the box

Parts and tools

CF Moto Z10 Intake Tube

Included parts

  • Intake Tube
  • Hardware Assembly

Required tools

  • Metric Socket
  • Screw Driver

Procedure

Installation

  1. Step 1

    Gather intake silicone kit parts.

    Gather intake silicone kit parts.
  2. Step 2

    Remove crank case vent from intake.

    Remove crank case vent from intake.
  3. Step 3

    Remove clamp from turbo and from airbox.

    Remove clamp from turbo and from airbox.
    Remove clamp from turbo and from airbox.
  4. Step 4

    Insert the 1.0” barb into intake silicone if you are running a recirculation valve. If not, install the 1.0” plug and worm drive. Insert the 5/8" barb into the silicone if you are NOT running a catch can. If you are running a catch can, plug the 5/8” port.

    Insert the 1.0” barb into intake silicone if you are running a recirculation valve.
    Insert the 5/8" barb into the silicone if you are NOT running a catch can.
  5. Step 5

    Remove the factory orientation tab located on the airbox with a side cutter or Dremel.

    Remove the factory orientation tab located on the airbox with a side cutter or Dremel.
  1. Step 6

    Reinstall the crank case vent to adapter if you are not running a catch can.

    Reinstall the crank case vent to adapter if you are not running a catch can.
  2. Step 7

    If you are running a recirculation valve, connect the hose to the valve and clamp.

    If you are running a recirculation valve, connect the hose to the valve and clamp.
Emissions notice. This product is exempt from the emission standards and related requirements of 40 C.F.R. § 1051 as provided by 40 C.F.R. § 1051.620, and California law [e.g., vehicle code §§ 27156 and 38391]. This product is sold only for use in connection with EPA certified, purpose-built, nonroad vehicles used solely for closed course, nonroad competition/racing and not used for any recreational purpose or on public highways or right of ways maintained by and open to the public. This product is sold only in connection with machines that do not fall under state and/or federal noise or emission standards/regulations. Purchasers who/that purchase this product represent and warrant that the product is purchased only in connection with EPA-certified, emission-regulations-exempt and noise-regulations-exempt competition/racing vehicles as interpreted under applicable state and/or federal law.

Need technical support?

Submit a ticket with your vehicle and what you're seeing, and our support team will get back to you.

Contact Support
We use cookies to improve your experience on our website. Read about how we use cookies in our Privacy Policy. By browsing this website, you agree to our use of cookies. privacy policy
accept

Your cart

×
×