BUY NOW, PAY LATER. Starting at 0% APR 
CF Moto Z10 Engine Oil Change
CF Moto Z10 oil change instructions
In the box
Parts and tools
Included parts
- 1Oil filter
- 51 Liter Oil Bottles
- 2O-rings
- 1Sealing washer
Required tools
- Oil filter wrench
- Ratchet
- M6 Allen key
- Oil pan
Procedure
Installation
- Step 1
Place oil pan under engine. Using a 6mm Allen key, remove drain plug and drain oil.
- Step 2
On right side of vehicle place rag under oil filter and unthread. Apply a small amount of oil to the filter O-ring of new oil filter and thread on hand tight. (12.5 ft.lb)
- Step 3
Replace copper washer on drain plug and reinstall (18.4ft.lb)
- Step 4
Remove and replace the 2 O-rings on the dip stick.
- Step 5
Using a funnel add 4.2 quarts of oil, replace dipstick start and run machine for a minute and recheck oil level. Add oil if needed.
Emissions notice. This product is exempt from the emission standards and related requirements of 40 C.F.R. § 1051 as provided by 40 C.F.R. § 1051.620, and California law [e.g., vehicle code §§ 27156 and 38391]. This product is sold only for use in connection with EPA certified, purpose-built, nonroad vehicles used solely for closed course, nonroad competition/racing and not used for any recreational purpose or on public highways or right of ways maintained by and open to the public. This product is sold only in connection with machines that do not fall under state and/or federal noise or emission standards/regulations. Purchasers who/that purchase this product represent and warrant that the product is purchased only in connection with EPA-certified, emission-regulations-exempt and noise-regulations-exempt competition/racing vehicles as interpreted under applicable state and/or federal law.
Need technical support?
Submit a ticket with your vehicle and what you're seeing, and our support team will get back to you.
