CF Moto Z10 EVP Boost Recirculation Valve (BRV) Kit

CF Moto Z10 EVP Boost Recirculation Valve (BRV) Kit

SKU
1502040006 (Orange), 1502040007 (Black)
Revision
REV_092226

Before you start

BOV, BRV, OEM BRV with adapter
This port is for Crankcase vent, If catch can is being used hose will route from here to catch can. This port will be used for EVO BRV and OEM BRV hoses, If BOV is used this will be plugged with a cap
This port is for Crankcase vent, If catch can is being used hose will route from here to catch can. This port will be used for EVO BRV and OEM BRV hoses, If BOV is used this will be plugged with a cap
This port is where the map sensor adaptor and map sensor are installed. This port is where the BOV, BRV, and oem BRV are installed
This port is where the map sensor adaptor and map sensor are installed. This port is where the BOV, BRV, and oem BRV are installed

In the box

Parts and tools

CF Moto Z10 EVP Boost Recirculation Valve (BRV) Kit

Included parts

  • BRV Valve
  • Hardware Assembly
  • Throttle Body Spacer Assembly
  • Recirculation Hose

Required tools

  • Sockets
  • Ratchet
  • Screwdrivers
  • Pinch clamp pliers

Procedure

Installation

  1. Step 1

    Place all the parts out on the bench.

    Place all the parts out on the bench.
  2. Step 2

    Install large O-ring into the groove on the throttle body spacer. Install the 90-degree barb with a thread tape. Barb will face left (towards the rear of the vehicle when installed.)

    Install large O-ring into the groove on the throttle body spacer.
  3. Step 3

    Remove charge tube from throttle body and push to the side.

    Remove charge tube from throttle body and push to the side.
  4. Step 4

    Unplug throttle body harness and remove (4) 8mm bolts holding throttle body to plenum.

    Unplug throttle body harness and remove (4) 8mm bolts holding throttle body to plenum.
  5. Step 5

    Remove throttle body. Confirm green O-ring is still in its place on the plenum. Install the spacer between throttle body and plenum, use supplied bolts and install the throttle body. Make sure the barb is on top.

    Confirm green O-ring is still in its place on the plenum.
    Install the spacer between throttle body and plenum, use supplied bolts and install the throttle body.
  1. Step 6

    Install the BRV into charge tube and clamp with worm drive. Reinstall charge tube, connect recirculation hose to BRV. Attach the 10.0” of 3mm hose to BRV and the 3.0” of 6mm hose to the throttle body port. Fasten hose down with 11.3mm pinch clamp and 13.3mm clamp on throttle body spacer.

    Install the BRV into charge tube and clamp with worm drive.
    Recirculation hose routing from intake to BRV “lower gray hose”
    Recirculation hose routing from intake to BRV “lower gray hose”
    Recirculation hose routing from intake to BRV “lower gray hose”
Emissions notice. This product is exempt from the emission standards and related requirements of 40 C.F.R. § 1051 as provided by 40 C.F.R. § 1051.620, and California law [e.g., vehicle code §§ 27156 and 38391]. This product is sold only for use in connection with EPA certified, purpose-built, nonroad vehicles used solely for closed course, nonroad competition/racing and not used for any recreational purpose or on public highways or right of ways maintained by and open to the public. This product is sold only in connection with machines that do not fall under state and/or federal noise or emission standards/regulations. Purchasers who/that purchase this product represent and warrant that the product is purchased only in connection with EPA-certified, emission-regulations-exempt and noise-regulations-exempt competition/racing vehicles as interpreted under applicable state and/or federal law.

Need technical support?

Submit a ticket with your vehicle and what you're seeing, and our support team will get back to you.

Contact Support
We use cookies to improve your experience on our website. Read about how we use cookies in our Privacy Policy. By browsing this website, you agree to our use of cookies. privacy policy
accept

Your cart

×
×