BUY NOW, PAY LATER. Starting at 0% APR 
SEE INSTALLED PICTURES
Arctic Cat 9000/1100T Turbo Header Blanket
Install guide for the EVP Turbo Header Blanket on Arctic Cat 9000/1100T turbo snowmobiles. Header and turbo wrap, install once and leave in place.
Procedure
Installation
- Remove BOTH top and bottom heat shields from the header and turbo
- From the left side of the engine (drivers side) feed the header blanket underneath the factory header pipe. It will be tight between the left chassis spar and the blanket (1100T). Do not pull with excess force or the blanket seams may rip. Do not try to stretch it around the header/turbo flange.
- Once it is completely around the header, snap it closed.
- For the turbo blanket, install the left hand spring onto the back capstan (the back capstan is the lone one on the side of the blanket) leave the long part of the spring free for now.
- Install the turbo blanket by feeding the side of the blanket with one capstan (and spring) around the back side of the turbo. Make sure the spring and blanket go under the waste gate arm.
- Using a needle nose pliers, grab the free end of the spring referenced in the previous instruction and pull it under the header/turbo flange and connect it to the front left hand capstan.
- Install the final spring on the front right capstan and stretch it alongside the turbo outlet flange to the top rear bolt on the downpipe flange. This spring is optional.
Caution
THIS PRODUCT WILL BECOME LESS FLEXIBLE OVER TIME. IT IS MEANT TO BE INSTALLED ONCE AND LEFT IN PLACE. REPEATED REMOVAL AND INSTALLATION WILL CAUSE THE PRODUCT TO DETERIORATE.
Warning
ANY OIL, FUEL OR OTHER FLAMABLE CHEMICALS THAT ARE SPILLED ON THE BLANKETS CAN CAUSE A FIRE! KEEP THE BLANKETS FREE FROM CHEMICALS!!! MAKE SURE ALL OF YOUR EXHAUST BOLTS ARE TIGHT AND THE GASKETS ARE IN GOOD SHAPE!!! EXHAUST LEAKS WILL DAMAGE THE BLANKETS!!!
Emissions notice. This product is exempt from the emission standards and related requirements of 40 C.F.R. § 1051 as provided by 40 C.F.R. § 1051.620, and California law [e.g., vehicle code §§ 27156 and 38391]. This product is sold only for use in connection with EPA certified, purpose-built, nonroad vehicles used solely for closed course, nonroad competition/racing and not used for any recreational purpose or on public highways or right of ways maintained by and open to the public. This product is sold only in connection with machines that do not fall under state and/or federal noise or emission standards/regulations. Purchasers who/that purchase this product represent and warrant that the product is purchased only in connection with EPA-certified, emission-regulations-exempt and noise-regulations-exempt competition/racing vehicles as interpreted under applicable state and/or federal law.
Need technical support?
Submit a ticket with your vehicle and what you're seeing, and our support team will get back to you.
