Arctic Cat 9000/1100T Silicone Boost Hose
Install guide for the EVP Arctic Cat 9000/1100T silicone boost hose kit: swap factory intercooler hoses for EVO silicone hoses and T-bolt clamps.
Procedure
Installation
- Remove hood
- Remove the plastic cover on the left side of the snowmobile that covers the turbocharger. There are 4 torx head screws
- Loosen intercooler boost hose clamps (upper and lower) and disconnect hoses from intercooler end tanks, turbo charger and throttle body.
- Install the new EVO hoses and T bolt clamps – make sure the clamps are clocked in such a way that they will not interfere with the throttle cable, side panel, or hood fitment. There are 3 smaller and one larger T bolt clamp. The larger end of the upper boost hose attaches to the throttle body. If the hose is difficult to install, spray brake cleaner on the throttle body and the inside of the silicone hose.
- If the hoses were purchased with an intercooler fan kit, some trimming of the lower hose where it connects to the intercooler may be necessary.
- Reinstall side panel and hood.
Need technical support?
Submit a ticket with your vehicle and what you're seeing, and our support team will get back to you.
BUY NOW, PAY LATER. Starting at 0% APR