BUY NOW, PAY LATER. Starting at 0% APR 
2026 Kawasaki H2 Primary Billet Clutch Cover
2026 Kawasaki H2 Primary Billet Clutch Cover
In the box
Parts and tools
Included parts
- 1Billet Clutch Cover
- 6M8x40mm Flange Bolts, Stainless
Required tools
- Snap Ring Pliers
- Torque Wrench
- Clutch Puller
- 21mm Socket
Procedure
Installation
- Step 1
This process can be done on the vehicle. Remove the outer clutch cover. Remove the drive belt. Use a 23mm socket to remove the OEM clutch bolt. Install the primary clutch puller. You will want a impact to remove this clutch.
- Step 2
With the clutch removed, install the clutch into a compression tool. Mark the cover, spider, and sheaves with a sharpie.
- Step 3
Remove the (6) 12mm screws holding the primary cover down. Release the spring tension.
- Step 4
Remove the primary spring.
- Step 5
Install the new cover without a spring, this will make sure the cover fits properly and your clutch is not out of spec. If the cover doesn’t fit, the towers have warped.
- Step 6
Remove the cover after test fitment. Install the spring into the spring cup, compress the cover down and install supplied hardware. Torque to 17 ft-lbs.
- Step 7
IF YOU REMOVED THE CLUTCH, clean the primary post and crankshaft stub with brake cleaner before reinstalling. Torque to 174 ft-lbs.
Need technical support?
Submit a ticket with your vehicle and what you're seeing, and our support team will get back to you.
