Can-Am X3 Race Muffler Bypass Straight Pipe

Installation instructions for the X3 Race Muffler Bypass Straight Pipe on the Can-Am Maverick X3 (SKU 300DC0010). Parts, tools, and full procedure.

Category
Exhaust
Legacy SKU
300DC0010
Revision
Rev_021121

In the box

Parts and tools

Included parts

  • 1EVP Bypass Pipe
  • 1EVP Mounting Bracket

Required tools

  • T-30 Torx
  • Spring Puller

Procedure

Installation Steps

  1. Step 1

    Remove the rear fascia from your X3. The panel is mounted using five torx bolts, three along the top and two on the bottom.

  2. Step 2

    Remove the four muffler springs (left image), using a spring puller is recommended. Remove the muffler by taking out the four mounting bolts (right images).

    Remove the four muffler springs (left image), using a spring puller is recommended.
    Remove the muffler by taking out the four mounting bolts (right images).
    Remove the muffler by taking out the four mounting bolts (right images).
  3. Step 3

    Install and mount the Muffler Bypass Pipe and bracket with the bolts loosely installed then hook up all four springs. Keep the bolts loose until the rear fascia is reinstalled.

  4. Step 4

    Attach the rear fascia with the five T-30 Torx bolts. Center the exhaust pipe in the hole of the rear fascia and tighten all bolts. Installation of the Cat Bypass is complete.

Emissions notice. This product is exempt from the emission standards and related requirements of 40 C.F.R. § 1051 as provided by 40 C.F.R. § 1051.620, and California law [e.g., vehicle code §§ 27156 and 38391]. This product is sold only for use in connection with EPA certified, purpose-built, nonroad vehicles used solely for closed course, nonroad competition/racing and not used for any recreational purpose or on public highways or right of ways maintained by and open to the public. This product is sold only in connection with machines that do not fall under state and/or federal noise or emission standards/regulations. Purchasers who/that purchase this product represent and warrant that the product is purchased only in connection with EPA-certified, emission-regulations-exempt and noise-regulations-exempt competition/racing vehicles as interpreted under applicable state and/or federal law.

Need technical support?

Submit a ticket with your vehicle and what you're seeing, and our support team will get back to you.

Contact Support
We use cookies to improve your experience on our website. Read about how we use cookies in our Privacy Policy. By browsing this website, you agree to our use of cookies. privacy policy
accept

Your cart

×
×