Can-Am X3 Magnum Slip-On Exhaust
Installation instructions for the X3 Magnum Slip-On Exhaust on the Can-Am Maverick X3 (SKU 300DC0013). Parts, tools, and full procedure.
In the box
Parts and tools
Included parts
- 1EVP Magnum Slip-On
Required tools
- T-30 Torx
- Spring Puller
Procedure
Installation Steps
- Step 1
Remove the rear valance from your X3. The panel is mounted using (5) Torx bolts, three along the top and two on the bottom.
- Step 2
- Step 3
Install and mount the Slip-on exhaust with the bolts loosely installed then hook up all four springs. Keep the bolts loose until the rear valance is reinstalled.
- Step 4
Attach the rear valance with the (5) T-30 Torx bolts. Center the exhaust pipe in the hole of the rear valance and tighten all bolts. Installation of the Slip-On Muffler is complete.
Need technical support?
Submit a ticket with your vehicle and what you're seeing, and our support team will get back to you.
BUY NOW, PAY LATER. Starting at 0% APR 

