BUY NOW, PAY LATER. Starting at 0% APR 
Polaris Xpedition CVT Intake Tube
Installation instructions for the Polaris Xpedition CVT Intake Tube on the Polaris Xpedition (SKU 203FP). Parts, tools, and full procedure.
In the box
Parts and tools
Included parts
- 1CVT Intake Tube
- 290/110 12mm Wide Clamps
Required tools
- 8mm Socket
- Screwdriver
Procedure
Installation
- Step 1
With a screwdriver or 8mm socket, remove (2) worm drive clamps one the belt cover and upper part of the 90 degree rubber.
- Step 2
Remove the OEM CVT intake duct.
- Step 3
Install the new CVT Intake duct with suppled clamps.
Emissions notice. This product is exempt from the emission standards and related requirements of 40 C.F.R. § 1051 as provided by 40 C.F.R. § 1051.620, and California law [e.g., vehicle code §§ 27156 and 38391]. This product is sold only for use in connection with EPA certified, purpose-built, nonroad vehicles used solely for closed course, nonroad competition/racing and not used for any recreational purpose or on public highways or right of ways maintained by and open to the public. This product is sold only in connection with machines that do not fall under state and/or federal noise or emission standards/regulations. Purchasers who/that purchase this product represent and warrant that the product is purchased only in connection with EPA-certified, emission-regulations-exempt and noise-regulations-exempt competition/racing vehicles as interpreted under applicable state and/or federal law.
Need technical support?
Submit a ticket with your vehicle and what you're seeing, and our support team will get back to you.
