BUY NOW, PAY LATER. Starting at 0% APR 
CF Moto Z10 Spark Plug
CF MOTO Z10 Spark Plug
In the box
Parts and tools
Included parts
- 3sparkplugs
Required tools
- 8mm socket
- 14mm socket
- Magnet
- Ratchet
- 6” extension
Procedure
Installation
- Step 1
Remove 8mm bolts and unclip harness from (3) coils. Pull gray locking tab away from clip and push down to release. Remove coils from the valve cover. Inspect the boots.
- Step 2
Using a 14mm socket and extension unthread sparkplug. Remove the old spark plug with magnet. Gap new plug to 0.018”. Install new spark plug with a magnet and torque to 9.5 ft.lbs
- Step 3
Install a dab of dielectric grease inside the boot. Reinstall coil and torque 8mm bolts to 80 in-lbs. Reinstall harness clips, be sure to slide gray tab back into locking position.
Emissions notice. This product is exempt from the emission standards and related requirements of 40 C.F.R. § 1051 as provided by 40 C.F.R. § 1051.620, and California law [e.g., vehicle code §§ 27156 and 38391]. This product is sold only for use in connection with EPA certified, purpose-built, nonroad vehicles used solely for closed course, nonroad competition/racing and not used for any recreational purpose or on public highways or right of ways maintained by and open to the public. This product is sold only in connection with machines that do not fall under state and/or federal noise or emission standards/regulations. Purchasers who/that purchase this product represent and warrant that the product is purchased only in connection with EPA-certified, emission-regulations-exempt and noise-regulations-exempt competition/racing vehicles as interpreted under applicable state and/or federal law.
Need technical support?
Submit a ticket with your vehicle and what you're seeing, and our support team will get back to you.
