2014+ Sea Doo Spark Ribbon Delete

Installation instructions for the 2014+ Sea Doo Spark Ribbon Delete on the 2014+ Sea-Doo Sea-Doo (SKU 903FS0000). Parts, tools, and full procedure.

Category
Intake
Vehicles
Sea-Doo
SKU
5001010020
Legacy SKU
903FS0000
Revision
Rev_062823

In the box

Parts and tools

2014+ Sea Doo Spark Ribbon Delete

Included parts

  • 1Ribbon Delete
  • 160-80mm Worm Drive
  • 2Zip Ties

Required tools

  • Cutters
  • Screwdriver

Procedure

Installation

  1. Step 1

    Remove the upper hull. See Sea Doo Spark Hull Removal Instructions.

  2. Step 2

    Locate the throttle body, cut (2) zip ties holding the fuel line to the plenum.

    Locate the throttle body, cut (2) zip ties holding the fuel line to the plenum.
  3. Step 3

    Remove the pinch clamp from the throttle body boot to plenum. Discard.

    Remove the pinch clamp from the throttle body boot to plenum. Discard.
  4. Step 4

    Pull the throttle body boot off the plenum. Located in the plenum is the flame arrestor.

    Pull the throttle body boot off the plenum. Located in the plenum is the flame arrestor.
    Pull the throttle body boot off the plenum. Located in the plenum is the flame arrestor.
  5. Step 5

    Remove the flame arrestor and seal.

    Remove the flame arrestor and seal.
  6. Step 6

    Install the ribbon delete into the plenum until it bottoms out. Reinstall the throttle body boot and supplied clamp.

    Install the ribbon delete into the plenum until it bottoms out. Reinstall the throttle body boot and supplied clamp.
    Install the ribbon delete into the plenum until it bottoms out. Reinstall the throttle body boot and supplied clamp.
  7. Step 7

    Install (2) zip ties holding the fuel hose to the plenum.

Emissions notice. This product is exempt from the emission standards and related requirements of 40 C.F.R. § 1051 as provided by 40 C.F.R. § 1051.620, and California law [e.g., vehicle code §§ 27156 and 38391]. This product is sold only for use in connection with EPA certified, purpose-built, nonroad vehicles used solely for closed course, nonroad competition/racing and not used for any recreational purpose or on public highways or right of ways maintained by and open to the public. This product is sold only in connection with machines that do not fall under state and/or federal noise or emission standards/regulations. Purchasers who/that purchase this product represent and warrant that the product is purchased only in connection with EPA-certified, emission-regulations-exempt and noise-regulations-exempt competition/racing vehicles as interpreted under applicable state and/or federal law.

Need technical support?

Submit a ticket with your vehicle and what you're seeing, and our support team will get back to you.

Contact Support
We use cookies to improve your experience on our website. Read about how we use cookies in our Privacy Policy. By browsing this website, you agree to our use of cookies. privacy policy
accept

Your cart

×
×