In the box
Parts and tools
Included parts
- 1Left Paddle Shifter
- 1Right Paddle Shifter
- 2Mounting Bracket
- 4M4 x 8mm Flat Head Screw
- Step 1
Remove (3) T-15 screws off the OEM bracket.
- Step 2
Install a bracket onto each paddle shifter as seen below. Use supplied hardware.
- Step 3
When installing the paddle shifter to the steering wheel console, there are (3) positions you can use for mounting. This will bring the shifters closer/farther away from the steering wheel.
- Step 4
Install the new bracket using OEM hardware. DO NOT OVER TIGHTEN INTO THE PLASTIC!!! IF YOU RUN INTO THIS ISSUE PLEASE CALL IN TO TECH AND GET SPECIAL SCREWS.
Emissions notice. This product is exempt from the emission standards and related requirements of 40 C.F.R. § 1051 as provided by 40 C.F.R. § 1051.620, and California law [e.g., vehicle code §§ 27156 and 38391]. This product is sold only for use in connection with EPA certified, purpose-built, nonroad vehicles used solely for closed course, nonroad competition/racing and not used for any recreational purpose or on public highways or right of ways maintained by and open to the public. This product is sold only in connection with machines that do not fall under state and/or federal noise or emission standards/regulations. Purchasers who/that purchase this product represent and warrant that the product is purchased only in connection with EPA-certified, emission-regulations-exempt and noise-regulations-exempt competition/racing vehicles as interpreted under applicable state and/or federal law.
SKU 4282010149; 925FC0746