EVP Steering Wheel and Quick Release Hub Kit

Installation instructions for the EVP Steering Wheel and Quick Release Hub Kit on the (SKU 925FC0265, 925FU0274). Parts, tools, and full procedure.

Vehicles
All vehicles
Legacy SKU
925FC0265, 925FU0274
Revision
Rev_071822

In the box

Parts and tools

EVP Steering Wheel and Quick Release Hub Kit

Included parts

  • 1Steering Wheel
  • 1Quick Release Hub Kit

Required tools

  • Steering Wheel puller or Two Jaw Puller
  • 24mm Socket
  • Flat Head Screwdriver
  • 1/8 Hex Key
  • Torque Wrench

Procedure

Installation Steps

  1. Step 1

    Use a flat blade screwdriver to remove the center steering wheel Cover.

    Use a flat blade screwdriver to remove the center steering wheel Cover.
  2. Step 2

    Use a 24mm socket and ratchet to remove the steering wheel nut.

    Use a 24mm socket and ratchet to remove the steering wheel nut.
  3. Step 3

    Install the steering wheel puller that is appropriate for your steering wheel and remove the wheel.

    Install the steering wheel puller that is appropriate for your steering wheel and remove the wheel.
    Install the steering wheel puller that is appropriate for your steering wheel and remove the wheel.
    Note

    It may be necessary to heat the center steering wheel hub with a heat gun to expand the material to ease removal.

  4. Step 4

    Clean the steering shaft splines and install the splined couple on the steering shaft so the letters face the driver.

    Clean the steering shaft splines and install the splined couple on the steering shaft so the letters face the driver.
  5. Step 5

    Install the coupler nut so the machined surface faces the splined coupler and torque to 66 Ft Lbs. (Polaris) and 44Ft Lbs. (Can Am).

  6. Step 6

    Pull up on the black collar, align the splines with from the quick release hub with the splined coupler. Release the collar and make sure the hub has clicked into position.

  7. Step 7

    Center the steering wheel over the hub, install the 6 10-32 screws and torque to 30 In Lbs.

Emissions notice. This product is exempt from the emission standards and related requirements of 40 C.F.R. § 1051 as provided by 40 C.F.R. § 1051.620, and California law [e.g., vehicle code §§ 27156 and 38391]. This product is sold only for use in connection with EPA certified, purpose-built, nonroad vehicles used solely for closed course, nonroad competition/racing and not used for any recreational purpose or on public highways or right of ways maintained by and open to the public. This product is sold only in connection with machines that do not fall under state and/or federal noise or emission standards/regulations. Purchasers who/that purchase this product represent and warrant that the product is purchased only in connection with EPA-certified, emission-regulations-exempt and noise-regulations-exempt competition/racing vehicles as interpreted under applicable state and/or federal law.

Need technical support?

Submit a ticket with your vehicle and what you're seeing, and our support team will get back to you.

Contact Support
We use cookies to improve your experience on our website. Read about how we use cookies in our Privacy Policy. By browsing this website, you agree to our use of cookies. privacy policy
accept

Your cart

×
×