BUY NOW, PAY LATER. Starting at 0% APR 
Each clicker cam has numbers 1-5. Each number will modify maximum engine RPM by about 100rpm’s. All three clickers must be set to the same setting.
Can-Am Can Am X3 Shift-Tek-P-Clicker Ultimate Clutch Kit
Can Am X3 Shift-Tek-P-Clicker Ultimate Clutch Kit
In the box
Parts and tools
Included parts
- 41-52 Helix Assembly
- Shift-Tek-P Clicker Clutch Kit
- Shift-Tek-P Red Spring
Required tools
- Clutch Service Tool Kit
- Screwdriver(s)
- 13,17,19,22mm Sockets
- Impact Driver
- 6mm Allen Socket
- Red & Blue Loctite
- Torque Wrench
- Torx Sockets
- Hammer
Reference
PDrive Clicker Weights with OEM Spring
| Stock | 3R-91 | 3R-93 | 3R-95 | 4X100 | 5X85 | P 300 | P 330 | P 360 | |
|---|---|---|---|---|---|---|---|---|---|
| Horsepower | 205 | 219 | 226 | 233 | 255 | 260 | 300 | 330 | 360 |
| Primary Spring | Stock | Stock | Stock | Stock | Stock | Stock | Stock | Stock | Stock |
| Engagement RPM | 1900 | 2800 | 2800 | 2800 | 2800 | 2800 | 2800 | 2800 | 2800 |
| Operating RPM | 7400 | 8000-8100 | 8000-8100 | 8000-8100 | 8000-8100 | 8000-8100 | 8400-8600 | 8400-8600 | 8400-8600 |
| Hole 1 | N/A | (2) 1/4" SS | (2) 3/16" ss | (2) 3/16" ss | (2) 1/4"ss | (2) 1/4"ss | (2) 3/8" ss | (2) Button Head 1/4" with Washer | (2) Button Head 1/4" with Washer |
| Hole 2 | N/A | 0 | 0 | 0 | 0 | (2) 1/4"ss | (2) 3/8" ss | (2) 3/8" SS | (2) Button Head 1/4" with Washer |
| Pivot Bolt | N/A | 1.0" | 1.0" | 1.25" | 1.25" | 1.25" | 1.25" | 1.25" | 1.25" |
| Pivot Washer | N/A | 0 | 2g | (2) 2g | 2g + 3g | 2g + 3g | 2g + 3g | 2g + 3g | 2g + 3g |
| Clicker Position | N/A | 3 | 3 | 3 | 4 | 3 | 3 | 3 | 3 |
| Assembled Weight in Grams | N/A | 73.3g | 77g | 80.5g | 82.5g | 84g | 86.5g | 90g | 93.3g |
| Secondary Spring | N/A | EVP Purple | EVP Purple | EVP Purple | EVP Purple | EVP Purple | EVP Purple | EVP Purple | EVP Purple |
| Helix | N/A | 41-52 | 41-52 | 41-52 | 41-52 | 41-52 | 41-52 | 41-52 | 41-52 |
| Hole on Helix Cap | N/A | Hole 5 | Hole 5 | Hole 5 | Hole 5 | Hole 5 | Hole 5 | Hole 5 | Hole 5 |
| Helix Cap Clocking | N/A | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 |
Reference
PDrive Clicker Weights with Red Spring
| Stock | 3R-91 | 3R-93 | 3R-95 | 4X100 | 5X85 | P 300 | P 330 | P 360 | |
|---|---|---|---|---|---|---|---|---|---|
| Horsepower | 205 | 219 | 226 | 233 | 255 | 260 | 300 | 330 | 360 |
| Primary Spring | N/A | Red | Red | Red | Red | Red | Red | Red | Red |
| Engagement RPM | N/A | 3600 | 3600 | 3600 | 3600 | 3600 | 3600 | 3600 | 3600 |
| Operating RPM | N/A | 8000-8100 | 8000-8100 | 8000-8100 | 8000-8100 | 8000-8100 | 8400-8600 | 8400-8600 | 8400-8600 |
| Hole 1 | N/A | (2) 1/4"ss | (2) 1/4"ss | (2) 1/4"ss | (2) 1/4"ss | (2) 3/8" ss | (2) 3/8" ss | (2) Button Head w Washer | |
| Hole 2 | N/A | 0 | 0 | 0 | (2) 1/4"ss | (2) 3/8" ss | (2) Button Head w Washer | (2) Button Head w Washer | |
| Pivot Bolt | N/A | 1.00" | 1.00" | 1.25" | 1.25" | 1.25" | 1.25" | 1.25" | |
| Pivot Washer | N/A | 0 | 2g | 2g + 3g | 2g + 3g | 2g + 3g | 2g + 3g | 2g + 3g | |
| Clicker Position | N/A | 3 | 3 | 3 | 3 | 3 | 3 | 3 | |
| Assembled Weight in Grams | N/A | 75.5g | 77.3g | 82.5g | 84g | 86.5g | 89.0g | 92.3g | |
| Secondary Spring | N/A | EVP Purple | EVP Purple | EVP Purple | EVP Purple | EVP Purple | EVP Purple | EVP Purple | EVP Purple |
| Helix | N/A | 41-52 | 41-52 | 41-52 | 41-52 | 41-52 | |||
| Hole on Helix Cap | N/A | Hole 5 | Hole 5 | Hole 5 | Hole 5 | Hole 5 | |||
| Helix Cap Clocking | N/A | 0 | 0 | 0 | 0 | 0 |
Note
Always install a set screw on both sides of the weight arm. Install the screws with the provided thread locker, making sure the screws are installed with an equal amount of thread engagement.
- Stock weights with stock spring: 1800rpm engagement
- Stock weights with red spring: 2300rpm engagement
- EVP clicker weights with stock spring: 2800rpm engagement
- EVP clicker weights with red spring: 3600rpm engagement
Reference
reference
Lower numbers decrease engine RPM in steps of 100 RPM and higher numbers increase in steps of 100 RPM
Example: Ramp cam is set at position 3 and changed to position 5. So maximum engine RPM is increased by 200 RPM.
Emissions notice. This product is exempt from the emission standards and related requirements of 40 C.F.R. § 1051 as provided by 40 C.F.R. § 1051.620, and California law [e.g., vehicle code §§ 27156 and 38391]. This product is sold only for use in connection with EPA certified, purpose-built, nonroad vehicles used solely for closed course, nonroad competition/racing and not used for any recreational purpose or on public highways or right of ways maintained by and open to the public. This product is sold only in connection with machines that do not fall under state and/or federal noise or emission standards/regulations. Purchasers who/that purchase this product represent and warrant that the product is purchased only in connection with EPA-certified, emission-regulations-exempt and noise-regulations-exempt competition/racing vehicles as interpreted under applicable state and/or federal law.
Need technical support?
Submit a ticket with your vehicle and what you're seeing, and our support team will get back to you.
