BUY NOW, PAY LATER. Starting at 0% APR 
Maverick R Steering Wheel Removal Tool
Maverick R Steering Wheel Removal Tool
In the box
Parts and tools
Included parts
- 1Steering wheel puller kit
- 2M6x1.0 x 50mm Bolt
- 1M12-1.75 x 60mm Bolt
Required tools
- Ratchet
- 10, 19, 24mm socket
Procedure
Installation
- Step 1
Remove center cap from steering wheel. Squeeze both top and bottom together.
- Step 2
Remove the center 24mm nut from steering wheel using a 19mm. Thread both M6 bolts through puller into steering wheel, do not over tighten. Snug is plenty. Using a ratchet and 19mm socket tighten center puller bolt until steering wheel “pops” off shaft.
- Step 3
Disconnect steering wheel harness to fully remove steering wheel. (4) T-30 Torx screws will be on the dash remove and lay dash to the side to expose the connection.
Emissions notice. This product is exempt from the emission standards and related requirements of 40 C.F.R. § 1051 as provided by 40 C.F.R. § 1051.620, and California law [e.g., vehicle code §§ 27156 and 38391]. This product is sold only for use in connection with EPA certified, purpose-built, nonroad vehicles used solely for closed course, nonroad competition/racing and not used for any recreational purpose or on public highways or right of ways maintained by and open to the public. This product is sold only in connection with machines that do not fall under state and/or federal noise or emission standards/regulations. Purchasers who/that purchase this product represent and warrant that the product is purchased only in connection with EPA-certified, emission-regulations-exempt and noise-regulations-exempt competition/racing vehicles as interpreted under applicable state and/or federal law.
Need technical support?
Submit a ticket with your vehicle and what you're seeing, and our support team will get back to you.
