BUY NOW, PAY LATER. Starting at 0% APR 
2026 Kawasaki H2 Shift-Tek Weight Pin Kit
Installation instructions for the 2026 Kawasaki H2 Shift-Tek Weight Pin Kit on the 2026 Kawasaki H2 / Z1 (SKU 402FP0128). Parts, tools, and full procedure.
In the box
Parts and tools
Included parts
- 3Pin
- 3Teflon Washer
- 3Locknut
Required tools
- Snap Ring Pliers
- Allen Socket
- Clutch Puller
- 10mm Socket
Procedure
Installation
- Step 1
Remove the outer clutch cover. Remove the drive belt. Use a 23mm socket to remove the OEM clutch bolt. Install the primary clutch puller. You will want a impact to remove this clutch.
- Step 2
Compress the primary cover down slightly. With a snap ring pliers, remove the snap ring. Be careful not to lose the snap ring.
- Step 3
On the opposite side of the snap ring, slightly tap the pin out. Sometimes they can be stuck.
- Step 4
Install the weight into the clutch. You can continue using the OEM pin and snap ring, we recommend using the updated EVP pins. Slide the threaded end first. Fasten down with washer and locknut.
- Step 5
Before installing the primary clutch back onto the crankshaft, clean both tapers with brake cleaner. Reinstall the clutch, torque the primary bolt to 174 ft-lb.
Need technical support?
Submit a ticket with your vehicle and what you're seeing, and our support team will get back to you.
