BUY NOW, PAY LATER. Starting at 0% APR 
Arctic Cat 1100T/Z1 EVP Turbo to Header Locking Fastener Kit
Installation instructions for the 1100T/Z1 EVP Turbo to Header Locking Fastener Kit on the Arctic Cat H2 / Z1. Parts, tools, and full procedure.
In the box
Parts and tools
Included parts
- 1Locking Fastener Kit
Required tools
- 8mm Socket
- Flat Head Screwdriver
Procedure
Installation Steps
- Step 1
The tab for the rear PTO bolt will need to be bent over prior to installation. (Figure 1)
- Step 2
Install bolts with a washer underneath the header.
- Step 3
Torque the bolts and install the locking tabs.
- Step 4
Install the “C” clips on each bolt.
Emissions notice. This product is exempt from the emission standards and related requirements of 40 C.F.R. § 1051 as provided by 40 C.F.R. § 1051.620, and California law [e.g., vehicle code §§ 27156 and 38391]. This product is sold only for use in connection with EPA certified, purpose-built, nonroad vehicles used solely for closed course, nonroad competition/racing and not used for any recreational purpose or on public highways or right of ways maintained by and open to the public. This product is sold only in connection with machines that do not fall under state and/or federal noise or emission standards/regulations. Purchasers who/that purchase this product represent and warrant that the product is purchased only in connection with EPA-certified, emission-regulations-exempt and noise-regulations-exempt competition/racing vehicles as interpreted under applicable state and/or federal law.
Need technical support?
Submit a ticket with your vehicle and what you're seeing, and our support team will get back to you.
