EVP XR Series High Flow Intake (HFI) Kits for Can Am Maverick X3
Starting at
-
Regular price
-
$357.00
-
Sale price
-
$357.00
-
Unit price
- per
Write a review below
Don’t limit your engine’s power output potential with a restrictive OEM intake! The all-new EVP XR Series High Flow Intake (HFI) Kit for Can Am Maverick X3 turbo (all models except XMR) solves the inherent issues with the OEM intake system by delivering smooth, undisturbed airflow to the turbocharger and increasing airflow which translates into MORE power—particularly for big turbo and/or tuned ECU applications! Gain upwards of 15 HP when paired with EVP DS-355 (or higher) turbo systems, or a solid 5-10 HP on stock turbo applications.
Additionally, the XR Series HFI kits eliminate unnecessary clutter and weight by replacing the OEM airbox and tray for a more aggressive, race-ready setup that also significantly eases plug changes and other maintenance tasks.
Turbochargers are most efficient when the air entering the inlet has the least amount of restriction as possible. The OEM airbox, due to its canister design, is not only restrictive, but the air entering the compressor section of the turbo is turbulent. These two factors limit the power the engine can make, particularly on big turbo/high-horsepower vehicles. EVP’s new proprietary XR Series HFI design is offered in three kits tailored specifically for Stock turbochargers, EVP Paragon or Dynomite turbo systems, and EVP Desert Storm turbo systems. All kits include a low-restriction/high-flow filter element, EVP pre-filter, smooth silicone elbow tubes with gradual diameter taper for greater airflow efficiency, plus mounting bracket and hardware. The free-flowing design supplies smooth, uninhibited airflow to the turbocharger inlet—which means MORE POWER!
EVP DISCLAIMER: Please note that to properly use these brackets, the following EVP parts are required:
- EVP X3 Bed Delete Kit
- EVP X3 Intercooler Tip-Up Bracket
- EVP X3 High-Volume Coolant Reservoir Tank
- EVP X3 High-Volume Coolant Relocation Brackets
- EVP X3 Scatter Shield (or aftermarket)
EVP XR SERIES HFI KIT FEATURES:
- Three unique kits available for Stock Turbo, EVP Paragon or Dynomite Turbo Systems, and EVP Desert Storm Turbo Systems
- Provides uninterrupted airflow to the turbo inlet for significantly enhanced power
- Eliminates clutter by replacing the OEM airbox, CVT ducts/housing, and airbox tray to make plug changes and other maintenance tasks hassle-free
- Includes EVP HFI Filter and Pre-Filter
ALL XR SERIES HFI KITS INCLUDE:
- EVP HFI Air Filter w/ Pre-Filter
- XR Series HFI Mounting Bracket
- Silicone Hose Connector
- Full hardware installation kit
Don’t limit your engine’s power output potential with a restrictive OEM intake! The all-new EVP XR Series High Flow Intake (HFI) Kit for Can Am Maverick X3 turbo (all models except XMR) solves the inherent issues with the OEM intake system by delivering smooth, undisturbed airflow to the turbocharger and increasing airflow which translates into MORE power—particularly for big turbo and/or tuned ECU applications! Gain upwards of 15 HP when paired with EVP DS-355 (or higher) turbo systems, or a solid 5-10 HP on stock turbo applications.
Additionally, the XR Series HFI kits eliminate unnecessary clutter and weight by replacing the OEM airbox and tray for a more aggressive, race-ready setup that also significantly eases plug changes and other maintenance tasks.
Turbochargers are most efficient when the air entering the inlet has the least amount of restriction as possible. The OEM airbox, due to its canister design, is not only restrictive, but the air entering the compressor section of the turbo is turbulent. These two factors limit the power the engine can make, particularly on big turbo/high-horsepower vehicles. EVP’s new proprietary XR Series HFI design is offered in three kits tailored specifically for Stock turbochargers, EVP Paragon or Dynomite turbo systems, and EVP Desert Storm turbo systems. All kits include a low-restriction/high-flow filter element, EVP pre-filter, smooth silicone elbow tubes with gradual diameter taper for greater airflow efficiency, plus mounting bracket and hardware. The free-flowing design supplies smooth, uninhibited airflow to the turbocharger inlet—which means MORE POWER!
Please note that to properly mount and install all XR Series HFI Kits, the following EVP parts are required:
- EVP X3 Bed Delete Kit
- EVP X3 Intercooler Tip-Up Bracket
- EVP X3 High-Volume Coolant Reservoir Tank
- EVP X3 High-Volume Coolant Relocation Brackets
- EVP X3 Scatter Shield (or aftermarket)
XR SERIES HFI FEATURES:
- Three unique kits available for Stock Turbo, EVP Paragon or Dynomite Turbo Systems, and EVP Desert Storm Turbo Systems
- Provides uninterrupted airflow to the turbo inlet for significantly enhanced power
- Eliminates clutter by replacing the OEM airbox, CVT ducts/housing, and airbox tray, making plug changes and other maintenance hassle-free
- Includes EVP HFI Filter and Pre-Filter
ALL XR SERIES HFI KITS INCLUDE:
- EVP HFI Air Filter w/ Pre-Filter
- XR Series HFI Mounting Bracket
- Silicone Hose Connector
- Full hardware installation kit
2017-2023 Can Am Maverick X3 Models (EXCEPT XMR)
Customer Reviews
testimonials
My car is absolutely insane. LOVE it. Thank you for everything. Zero issues and even in 95 degree ambient it's not over heating dining or anything. This power dining is 100% perfect. Car is a beast. You guys Rock! - Dynomite Turbo Kit
Ernie
Evolution Powersports has a reputation of the utmost quality and attention to detail on every product they design. From within the industry and outside, I have heard nothing but great things about this company and my experience has been the same. If you are looking to make more reliable power this company can get you there. Both customer service and product design are top notch and they stand behind their work!
Blake S
Don’t spend much of your money here unless you want gobs and gobs of reliable power
Collision Vision
I wouldn’t go with another company if you payed me
Ryan L
If you truly want to build your project with the best possible parts available, buy EVO. They not only build with the best materials they test and test to make sure you are getting the performance gains they say you will but that the mods will be safe and keep the reliability of the machine as high as possible. Thanks again to both Jim and Todd. Keep it up guys!
John K
Great customer service!
I have had such a great experience with EVO over the course of a year, I wouldn’t even try going anywhere else. Prices are fair and the performance you receive is unreal!!