EVP High Flow Intake (HFI) Kits for Can Am Maverick X3

Starting at

Regular price
$321.00
Sale price
$321.00
Unit price
per 

Write a review below

Don’t limit your engine’s power output potential with a restrictive OEM airbox! The all-new EVP High Flow Intake (HFI) Kit for Can Am Maverick X3 turbo (all models except XMR) solves the inherent issues with the OEM intake system by delivering smooth, undisturbed airflow to the turbocharger and increasing airflow which translates into MORE power—particularly for big turbo and/or tuned ECU applications! Gain upwards of 15 HP when paired with EVP DS-355 (or higher) turbo systems, or a solid 5-10 HP on stock turbo applications.

Turbochargers are most efficient when the air entering the inlet has the least amount of restriction as possible. The OEM airbox, due to its canister design, is not only restrictive, but the air entering the compressor section of the turbo is turbulent. These two factors limit the power the engine can make, particularly on big turbo/high-horsepower vehicles.

EVP’s new proprietary HFI design is offered in three unique kits tailored specifically for Stock turbochargers, EVP Paragon and Desert Storm turbo systems. The EVP HFI features a free-flowing design that supplies smooth, uninhibited airflow to the turbocharger inlet. The low-restriction/high-flow filter element, EVP pre-filter and smooth silicone elbow tubes with gradual diameter taper all result in greater airflow efficiency, which means MORE POWER!

Installs directly into the OEM air filter tray without modifications, keeps all of the clutch ducts and is also compatible with the OEM air filter cover so you can keep it stealthy or run it wide open.

 

All EVP HFI Kits Include:

  • EVP HFI MAX Filtration High flow air filter
  • EVP Prefilter
  • EVP 45mm/Stock, 47mm/Paragon, OR 76mm Desert Storm Turbo Silicone Hose
  • EVP HFI Intake Foam Clutch Duct Insert for stock air filter tray
  • EVP HFI 4” to 3” Intake Reducer
  • EVP full hardware kit for an easy installation

 

EVP HFI FEATURES

  • More HP and faster spooling turbocharger characteristics (5-15+ HP Depending on power / boost levels)
  • Clean, stealthy direct-replacement HFI that installs directly into the OEM air filter tray (no cutting required) - bolt on and go!
  • Can be used with or without the stock air filter cover
  • Kits available for stock turbos (45mm), as well as EVP Paragon (47mm) and Desert Storm (76mm) turbo systems
  • Compatible with the factory CVT clutch duct
  • Includes all hardware necessary for installation

Turbo Kit Type
Please select at least one of the options.
Quantity

Don’t limit your engine’s power output potential with a restrictive OEM air box! The all-new EVP High Flow Intake (HFI) Kit for Can Am Maverick X3 turbo (all models except XMR) solves the inherent issues with the OEM intake system by delivering smooth, undisturbed airflow to the turbocharger and increasing airflow which translates into MORE power—particularly for big turbo and/or tuned ECU applications! Gain upwards of 15 HP when paired with EVP DS-355 (or higher) turbo systems, or a solid 5-10 HP on stock turbo applications.

Turbochargers are most efficient when the air entering the inlet has the least amount of restriction as possible. The OEM air box, due to its canister design, is not only restrictive, but the air entering the compressor section of the turbo is turbulent. These two factors limit the power the engine can make, particularly on big turbo/high-horsepower vehicles.

EVP’s new proprietary HFI design is offered in three unique kits tailored specifically for Stock turbochargers, EVP Paragon and Desert Storm turbo systems. The EVP HFI features a free-flowing design that supplies smooth, uninhibited airflow to the turbocharger inlet. The low-restriction/high-flow filter element, EVP pre-filter and smooth silicone elbow tubes with gradual diameter taper all result in greater airflow efficiency, which means MORE POWER!

Installs directly into the OEM air filter tray without modifications, keeps all of the clutch ducts and is also compatible with the OEM air filter cover so you can keep it stealthy or run it wide open. 

All EVP HFI Kits Include:

  • EVP HFI MAX Filtration High-flow air filter
  • EVP Pre-filter
  • EVP 45mm/Stock, 47mm/Paragon, OR 76mm Desert Storm Turbo Silicone Hose
  • EVP HFI Intake Foam Clutch Duct Insert for stock air filter tray
  • EVP HFI 4” to 3” Intake Reducer
  • EVP full hardware kit for an easy installation

 

EVP HFI FEATURES

  • More HP and faster spooling turbocharger characteristics (5-15+ HP depending on power / boost levels)
  • Clean, stealthy direct-replacement HFI that installs directly into the OEM air filter tray (no cutting required) — bolt on and go!
  • Can be used with or without the stock air box cover
  • Kits available for stock turbos (45mm), as well as EVP Paragon (47mm) and Desert Storm (76mm) turbo systems
  • Compatible with the factory CVT clutch duct
  • Includes all hardware necessary for installation

     

    2017-2022 Can Am Maverick X3 Models (EXCEPT XMR)

    This product is exempt from the emission standards and related requirements of 40 C.F.R. § 1051 as provided by 40 C.F.R. § 1051.620, and California law [e.g., vehicle code§§ 27156 and 38391]. This product is sold only for use in connection with EPA -certified, purpose-built, nonroad vehicles used solely for closed course, nonroad competition/racing and not used for any recreational purpose or on public highways or right of ways maintained by and open to the public. This product is sold only in connection with machines that do not fall under state and/or federal noise or emission standards/regulations. Purchasers who/that purchase this product represent and warrant that the product is purchased only in connection with EPA -certified, emission-regulations-exempt and noise-regulations-exempt competition/racing vehicles as interpreted under applicable state and/or federal law. Questions: Call Evolution Powersports at (715) 247-3862.

    Customer Reviews

    No reviews yet Write a review

    testimonial

    My car is absolutely insane. LOVE it. Thank you for everything. Zero issues and even in 95 degree ambient it's not over heating dining or anything. This power dining is 100% perfect. Car is a beast. You guys Rock! - Dynomite Turbo Kit

    Ernie

    Evolution Powersports has a reputation of the utmost quality and attention to detail on every product they design. From within the industry and outside, I have heard nothing but great things about this company and my experience has been the same. If you are looking to make more reliable power this company can get you there. Both customer service and product design are top notch and they stand behind their work!

    Blake S

    Don’t spend much of your money here unless you want gobs and gobs of reliable power

    Collision Vision

    I wouldn’t go with another company if you payed me

    Ryan L

    If you truly want to build your project with the best possible parts available, buy EVO. They not only build with the best materials they test and test to make sure you are getting the performance gains they say you will but that the mods will be safe and keep the reliability of the machine as high as possible. Thanks again to both Jim and Todd. Keep it up guys!

    John K

    Great customer service!
    I have had such a great experience with EVO over the course of a year, I wouldn’t even try going anywhere else. Prices are fair and the performance you receive is unreal!!

    Dave B

    You may also like

      is added to your shopping cart.

      Close
      Close
      Remove all items? This cannot be undone.
      Close