0
0
textron_xx_badass_belt

X3 TAPP Clutch XR Race Series Drive Belt for 400+ HP Can Am Maverick

Starting at

$224.95
$224.95

Write a review below

*This belt is recommended for all EVP.MOde Spec TAPP primary clutches calibrated for 400+ HP Can-Am Maverick X3's.

 

Due to the larger overall diameter and overdrive capability of the Tapp primary clutch, customers with 400+ horsepower X3’s used for drag racing should consider using our slightly longer WBB112 belt over the OEM length WBB383 belt.High horsepower cars on launch control can over shift beyond the length of the OEM belt on the initial hit.  This can cause the belt to bottom out on the helix in the secondary clutch and/or rip the belt in half. The longer belt prevents this undesirable result. The EVP TAPP XR Race Series Belt features the same rock-solid performance and dependability countless customers (and all EVP racers) have relied on since introducing the EVP BADASS Belt lineup. 


World's Best XR Race Series belts are manufactured with a larger Kevlar cord and feature a custom braid design marrying the layers of the belt for better shock absorption and increased cord pop-out resistance. An additional benefit includes being able to withstand more heat for increased overall strength and durability.

 

  • Designed with larger Kevlar cord and a custom braid design for better shock absorption when landing
  • Made from custom blend of two premium High Modulus Compounds holding the top and bottom layers together like super glue
  • Load tested to withstand the power of up to 600 hp machines
  • Impregnated with short Aramid Fibers for better heat resistance and belt-to-sheave adhesion.
     
1 x X3 TAPP Clutch XR Race Series Drive Belt for 400+ HP Can Am Maverick
$224.95
22495
Subtotal
$224.95
Quantity

*This belt is recommended for all EVP.MOde Spec TAPP primary clutches calibrated for 400+ HP Can-Am Maverick X3's.

Due to the larger overall diameter and overdrive capability of the Tapp primary clutch, customers with 400+ horsepower X3’s used for drag racing should consider using our slightly longer WBB112 belt over the OEM length WBB383 belt.High horsepower cars on launch control can over shift beyond the length of the OEM belt on the initial hit.  This can cause the belt to bottom out on the helix in the secondary clutch and/or rip the belt in half. The longer belt prevents this undesirable result. The EVP TAPP XR Race Series Belt features the same rock-solid performance and dependability countless customers (and all EVP racers) have relied on since introducing the EVP BADASS Belt lineup. 

World's Best XR Race Series belts are manufactured with a larger Kevlar cord and feature a custom braid design marrying the layers of the belt for better shock absorption and increased cord pop-out resistance. An additional benefit includes being able to withstand more heat for increased overall strength and durability. 

  • Designed with larger Kevlar cord and a custom braid design for better shock absorption when landing 
  • Made from custom blend of two premium High Modulus Compounds holding the top and bottom layers together like super glue.
  • Load tested to withstand the power of up to 600 hp machines. 
  • Impregnated with short Aramid Fibers for better heat resistance and belt-to-sheave adhesion.


ADDITIONAL FEATURES/BENEFITS:

  • Race Proven Performance
  • Manufacturing, quality control certifications: ISO-14001, ISO-9001, and IATF-16949
  • Newly released design that has a larger Kevlar cord with a custom braid design to act as a shock absorber for HIGH HORSEPOWER TENSILE LOAD requirements
  • New vulcanization process marrying the layers of the belt together around the cord, preventing premature separation of the layers
  • Highest shock load rating to-date: Able to withstand the power of 600 hp machines
  • Increased top cog pressure load design that increases sidewall rigidity, prevents top cog bowing, but still allows for increased rotational flexibility.
  • Bottom Cog uses HIGH MODULOUS RUBBER COMPOUND (BZX1) for better heat resistance and heat dissipation
  • Bottom cog is impregnated with short Aramid Fibers for better belt-to-sheave adhesion and reduced overall belt temperature
  • Latest bottom cog design for greater rotational efficiency at full shift
  • Precision ground sidewall angle (SCUFFING) for smooth engagement, increased power transfer and lower operating belt temperature
  • Kevlar cord (vs Polyester) wraps over bottom cogs for increased bottom cog strength and increased cord pop-out resistance

Can Am:
2017-2022 X3 Maverick / X3 MAX / X3 900 All Models with Tapp Primary Clutch

  • Replaces OEM #’s 422280651 / 417300383 / 422280654 / 417300571 / 417300551 / 417300531 / 422280652

     

        This product is exempt from the emission standards and related requirements of 40 C.F.R. § 1051 as provided by 40 C.F.R. § 1051.620, and California law [e.g., vehicle code§§ 27156 and 38391]. This product is sold only for use in connection with EPA -certified, purpose-built, nonroad vehicles used solely for closed course, nonroad competition/racing and not used for any recreational purpose or on public highways or right of ways maintained by and open to the public. This product is sold only in connection with machines that do not fall under state and/or federal noise or emission standards/regulations. Purchasers who/that purchase this product represent and warrant that the product is purchased only in connection with EPA -certified, emission-regulations-exempt and noise-regulations-exempt competition/racing vehicles as interpreted under applicable state and/or federal law. Questions: Call Evolution Powersports at (715) 247-3862.

        Customer Reviews

        Based on 1 review Write a review

        testimonials

        My car is absolutely insane. LOVE it. Thank you for everything. Zero issues and even in 95 degree ambient it's not over heating dining or anything. This power dining is 100% perfect. Car is a beast. You guys Rock! - Dynomite Turbo Kit

        Ernie

        Evolution Powersports has a reputation of the utmost quality and attention to detail on every product they design. From within the industry and outside, I have heard nothing but great things about this company and my experience has been the same. If you are looking to make more reliable power this company can get you there. Both customer service and product design are top notch and they stand behind their work!

        Blake S

        Don’t spend much of your money here unless you want gobs and gobs of reliable power

        Collision Vision

        I wouldn’t go with another company if you payed me

        Ryan L

        If you truly want to build your project with the best possible parts available, buy EVO. They not only build with the best materials they test and test to make sure you are getting the performance gains they say you will but that the mods will be safe and keep the reliability of the machine as high as possible. Thanks again to both Jim and Todd. Keep it up guys!

        John K

        Great customer service!
        I have had such a great experience with EVO over the course of a year, I wouldn’t even try going anywhere else. Prices are fair and the performance you receive is unreal!!

        Dave B

        You may also like

        is added to your shopping cart.

        Close
        Close
        Remove all items? This cannot be undone.
        Close