NO MORE GAUGE CLUSTER MESS
With the EVP Dash Flash, display boost pressure on the OEM dash cluster without any wiring or running hoses! AFR and Belt Temp display options also available.
no more uninstalling your dash!
The days of needing to uninstall your dash and ship it to EVP are OVER! Purchase CodeShooter and gain the ability to flash your dash right from within the app. Purchase the separately sold AFR and Belt Temp Modules and live Monitor engine data right In the App!
Without any wiring, running hoses, etc display boost pressure right on your OEM dash cluster! The Dash Flash takes the boost pressure reading directly from the ECU and displays it on the dash.
ADD AFR & BELT TEMP MODULES FOR A TRUE 3-IN-1 GAUGE SOLUTION
Add our plug-&-play Air Fuel Module and Belt Temp Modules (sold separately) to allow both AFR and Belt Temperature to be broadcasted to the dash for a complete 3-in-1 gauge solution.
The Air Fuel Module plugs into the diagnostic port and displays AFR values on the dash. It requires an extra 02 bung (supplied) to be welded into the exhaust system. No additional wiring other than plugging the module into the OEM diagnostic port and running the supplied 10’ cable to the included Bosch LSU 4.9 02 sensor.
Our port replicator allows both modules to be connected along with a 3rd open port for the OEM BUDS or Maptuner X to be connected.
NOTE: The OEM Bosch ECU will only read up to 22.5 psi of boost unless you are running one of our Dynomite or Desert Storm turbo kits - these kits will display up to 45 psi. Please select 'Big Turbo' if your are running one of these kits and we will program the dash appropriately for the higher boost version.