Can Am X3 Belt Temperature & Air/Fuel Ratio Modules for CodeShooter &

Can Am X3 Belt Temperature & Air/Fuel Ratio Modules for CodeShooter & Dash Flash

$225-$495

Combine our CodeShooter Device and our Air/Fuel Ratio Module and/or Belt Temperature Module and gain the ability to Live Monitor AFR/Belt Temp directly in the app as well as on the dash!

Completely plug-n-play, connect the module(s) to your vehicle, ensure your CodeShooter device is also plugged into vehicle and see your engine data right in the app!

Both Modules (AFR and Belt Temp) plug into the diagnostic port. AFR requires an auxiliary 02 bung (supplied) to be welded into the exhaust system. No additional wiring other than plugging the module into the OEM diagnostic port and running the supplied wiring harness(es) to the included sensor(s). Our port replicator allows both modules to be connected along with a 3rd open port for the OEM BUDS or Flashing Device to be connected.

With the CodeShooter Device and modules, you can now live monitor AFR/Belt Temp directly in the app!

BELT TEMPERATURE MODULE - $225

Included:

12v power/CANBus cable
Infrared sensor pigtail
15ft wiring harness
Module and mounting velcro
PnP Adapter harness

Note: For maximum belt life, try to avoid temperatures in excess of 200-225 F.

AIR/FUEL RATIO MODULE - $250

Included:

Bosch LSU 4.9 02 Lamda Sensor with pigtail
10ft wiring harness
Auxiliary 02 bung
PnP Adapter harness
CAN Lamda Module

Block

*Port Replicator required for use with either module.

Both Modules (AFR and Belt Temp) plug into the diagnostic port and displays values in your CodeShooter Mobile App. AFR requires an extra 02 bung (supplied) to be welded into the exhaust system. No additional wiring other than plugging the module into the OEM diagnostic port and running the supplied wiring harness(es) to the included sensor(s). Our port replicator allows both modules to be connected along with a 3rd open port for the OEM BUDS or Flashing Device to be connected.