NO MORE GAUGE CLUSTER MESS

With the EVP Dash Flash, display boost pressure on the OEM dash cluster without any wiring or running hoses! AFR and Belt Temp display options also available.

Dash Flash for 2020 X3 Models with 4
Dash Flash for 2020 X3 Models with 4

Dash Flash for 2020 X3 Models with 4" & 7" Dash and 2021 X3 Models with 4" Dash

$249-$948

EVP DISCLAIMER: Not compatible with 2021+ X3 Turbo RR or 2023+ X3 Turbo (base model) with MG1 ECU's.

Display Boost, Air Fuel and Belt Temps on your OEM Dash Cluster!

The EVP X3 Dash Flash has been available for about a year, but with the release of the revolutionary CodeShooter App Based Flashing Device, you no longer need to send your dash cluster to us for programming! Purchase CodeShooter and gain the ability to flash your dash right from within the app. The Flash takes the boost pressure reading directly from the ECU and displays it on the dash. Also, when you purchase the separately sold AFR and Belt Temp Modules you can live monitor the belt temp and AFR values along with other critical data within the app!

If you already have an EVP Power Flash and/or a MapTuner device, you can simply purchase a CodeShooter device and we will transfer your previously purchased tune(s) to your new CodeShooter. This will allow you to use Codeshooter to flash your dash as well as use all of the other great features CodeShooter has to offer. 

Don’t own an EVP ECU tune and want an EVP Dash Flash? No problem. Our Dash flash works independently of the ECU flash. Codeshooter can be setup to just flash the Dash so your current ECU calibration remains unchanged. You can still enjoy the other features of Codeshooter like clear and read DTC’s as well as live monitor belt temp, AFR and engine data.



parallax

no more uninstalling your dash!

The days of needing to uninstall your dash and ship it to EVP are OVER! Purchase CodeShooter and gain the ability to flash your dash right from within the app. Purchase the separately sold AFR and Belt Temp Modules and live Monitor engine data right In the App!

DISPLAY BOOST

Without any wiring, running hoses, etc display boost pressure right on your OEM dash cluster! The Dash Flash takes the boost pressure reading directly from the ECU and displays it on the dash. 

ADD AFR & BELT TEMP MODULES FOR A TRUE 3-IN-1 GAUGE SOLUTION

Add our plug-&-play Air Fuel Module and Belt Temp Modules (sold separately) to allow both AFR and Belt Temperature to be broadcasted to the dash for a complete 3-in-1 gauge solution.

The Air Fuel Module plugs into the diagnostic port and displays AFR values on the dash. It requires an extra 02 bung (supplied) to be welded into the exhaust system. No additional wiring other than plugging the module into the OEM diagnostic port and running the supplied 10’ cable to the included Bosch LSU 4.9 02 sensor.
Our port replicator allows both modules to be connected along with a 3rd open port for the OEM BUDS or Maptuner X to be connected. 

NOTE: The OEM Bosch ECU will only read up to 22.5 psi of boost unless you are running one of our Dynomite or Desert Storm turbo kits - these kits will display up to 45 psi. Please select 'Big Turbo' if your are running one of these kits and we will program the dash appropriately for the higher boost version.

FEATURE VIDEOS

We use cookies to improve your experience on our website. Read about how we use cookies in our Privacy Policy. By browsing this website, you agree to our use of cookies. privacy policy
accept

Your cart

×
×