Polaris Ranger 1000 ECU Programming

$449.00$549.00

Evolution Powersports has released its long anticipated Polaris Ranger 1000 Programming.  Polaris limits the throttle opening of the 2017 Ranger 1000 programming to less than 30%.  We reprogram the ECU to allow 100% throttle, revised timing, raised rev limits, raised speed limits, etc.  Huge horsepower gains have been realized through these modifications to the OEM programming. We also build additional safety into our tune by lowering the fan on temperature by 20 deg F. The OEM fan on temperature is is too high (well over 200 deg F). In addition the fan on/off temperatures can be set for each customer depending upon where they live and the conditions typically ridden in. Other great features are added and/or changed to enhance the drivability and fun factor of the vehicle. Evolution Powersports has vast knowledge of the Polaris Bosch ECU from our work in the automotive world. We have brought this expertise to the SXS market to extract the most performance from the Ranger 1000 engines as possible. Your ecu must be sent to our Somerset WI facility for reprogramming – otherwise, pre flashed ECU’s can be purchased outright for additional cost. You can also have your ECUs programmed by one of our Flashing Dealers (see Dealers section for a list of dealers with flash capability)

NOTE: The 2017 Ranger 1000 is clutched for a 6500 rpm shift.  This is FAR too low to get maximum performance from this engine.  The Prostar twin makes best power at 7900-8000 rpms – therefore clutching is HIGHLY recommended.  We will have clutching packages for this vehicle shortly!

  • Rev Limiters raised to 8500 for both high and low gear
  • Improved throttle response in all modes (E-Gas Settings Improved)
  • 100% Throttle in both high and low gear
  • Improved ignition timing advance optimized for 91 Octane for maximum power
  • Fueling adjusted for aftermarket components (intakes, exhausts and cat deletes) for optimal Air/Fuel Ratios
    No need to run a “piggyback” fuel controller with our reflash for most bolt on mods (You are responsibe to make sure your mods are compatible with our programming – All EVO and most other aftermarket companies’ exhausts are compatible with our programming as well as all EVO intakes)
  • Torque Limiters removed (“Shaft Saver delete”) for a much more responsive and fun vehicle
  • Cooling fan on temperature is lowered by 20 Deg F, but can be set to whatever temperature the customer wants
  • Vmax raised (top speed)

100% Throttle Dyno Run Demonstration Video

Clear

Factory Installed Options – We need this information in order to program the ecu correctly

Clutching Option

Additional information

Weight 2 lbs
Dimensions 7 x 7 x 4 in

You may also like…