{"title":"Complete Clutches","description":null,"products":[{"product_id":"can-am-defender-1000-tapp-primary-clutch-kit-by-evp-mode","title":"Can-Am Defender HD10 TAPP Roller Primary Clutch Kit by EVP","description":"\u003ch1\u003eDESCRIPTION\u003c\/h1\u003e\n\u003cp\u003e\u003cspan\u003e\u003c\/span\u003e\u003cspan\u003eDon't think a TAPP clutch can be any smoother and more responsive than it already is? Think again. The all-new Roller Spider design for TAPP Primary Clutches replaces the original button spider assembly for instant power delivery due to the reduction in friction between the spider and movable sheave. This results in even better belt grip than before, lower belt temps, better belt life, and buttery smooth engagement that's guaranteed to keep your car dialed in any riding condition.\u003c\/span\u003e The patent-pending TAPP Roller Primary Clutch is the next revolution in clutching technology.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eUPDATED FEATURES:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eROLLER SPIDER DESIGN:\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003ecreates less friction in the movable sheave compared to button spiders for a much more responsive setup\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCENTER BEARING: \u003c\/strong\u003eNEW black nitrate coating (black finish) adds an extra layer of hardness, prevents rust corrosion, and reduces friction for even smoother clutch operation\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePOST: \u003c\/strong\u003eupdated with additional material and new heat-treating process, allowing the clutch to be over-torqued from factory specs by preventing the clutch from slipping on the shaft (necessary for high-horsepower builds and\/or drag racing setups)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMOVEABLE SHEAVE: \u003c\/strong\u003eadded material with the new roller spider design, reinforcing the clutch towers for greater load-bearing capabilities\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCLUTCH COVER:\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003ethe billet aluminum clutch cover now features larger \"windows\" to allow additional weight without having to modify the clutch cover\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cul\u003e\u003c\/ul\u003e\n\u003cp\u003eEVP has developed, tested, and fine-tuned the perfect TAPP primary clutch calibration for Can Am Defenders that delivers bolt-on performance and responsiveness you will feel at first pull. Faster acceleration, higher top speeds, amazing zero to 40 mph pulls holding higher RPMs over stock, and virtually no clutch chatter, all standard-issue upgrades of an EVP.MOde Spec TAPP Primary Clutch for Can Am Defenders.\u003c\/p\u003e\n\u003cp\u003eCalibrated for use with the bone-stock Defender secondary clutch, additional TAPP Clutch features include cooler operating temperatures to extend clutch and belt life, responsive power put down via excellent belt grip, and easily adjustable weight profiles that allow your TAPP to evolve as your Defender's power level evolves. From trail riding and navigating technical terrain to hauling, plowing or casually cruising, you're guaranteed to feel the difference an EVP.MOde Spec TAPP primary clutch makes.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eADDITIONAL TAPP CLUTCH FEATURES:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eDURABLE PERFORMANCE: \u003c\/strong\u003eTAPP clutches are built from billet aluminum and other high-tech materials that can withstand extreme heat and extend clutch life, so you can spend more time riding and less time in the shop. EVP has used TAPP clutches on our all-out drag race Can Am X3 and Polaris XPT vehicles with very high engagement launches without failure. The OEM primary clutch is reliable up to about 300 hp, but an EVP Spec TAPP primary can easily handle anything from 200-500+ hp and all terrain and riding styles - drag race, duning, trail riding, rock crawling, short course and desert racing - all with the unrivaled quality, durability and performance expected out of a TAPP Clutch.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eADJUSTABLE \u0026amp; VERSATILE: \u003c\/strong\u003eTAPP clutches are a game-changer when it comes to tuning and adjustability, allowing your clutch to easily evolve as your UTV's power level evolves. The two-sided ramps are swapped in minutes with just an Allen wrench. The clickers are adjusted externally, which can raise or lower the entire shift pattern easily. The roller arms allow mass to be added or removed by removing the clutch cover, and there are a variety of TAPP and EVP primary springs available for fine-tuning. Lastly, the TAPP clutch is also extremely forgiving, allowing a wide variety of helix angles to work with a given primary clutch calibration.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCOOLER TEMPS: \u003c\/strong\u003eTAPP primary clutches run cooler than any clutch on the market. High-tech materials, extensive venting for optimum airflow, and cooler belt temperatures thanks to the multi-angle curved sheaves all contribute to extending belt and overall clutch life‚Äîeven under the most demanding abuse.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eINSTANT THROTTLE RESPONSE: \u003c\/strong\u003eTAPP primary clutches are intended for customers that demand responsiveness and durability from their CVT drive system whether their UTV is relatively stock or all-out big turbo drag race trim. The centralized mass and lightweight, low-inertia design coupled with multi-angled curved sheaves and custom ramp angles deliver unbeatable belt grip, instantaneous throttle response and surefire power to the ground.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSMOOTH, QUIET OPERATION: \u003c\/strong\u003eThe arms don't 'swing out' like a traditional flyweight but instead ride on a ramp system, which allows the clutch to be remarkably smooth and perform with minimal vibration. You will feel and hear the difference.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003e\u003cem\u003eDisclaimer:\u003c\/em\u003e\u003c\/strong\u003e\u003cem\u003e EVP only offers Tech Support for EVP.MOde Spec TAPP clutches purchased directly from EVP. All EVP Calibrated Tapp Clutch primaries may require minor calibration changes. If you need tuning support, please reference our instructions page or contact our technical department. \u003c\/em\u003e\u003c\/p\u003e\n\u003cp\u003eQuestions? Give us a call! EVP Team members are available from 8:30am to 5:00pm CST and can help dial in the perfect clutch for your setup: (715) 247-3862.\u003c\/p\u003e\n\u003ch1\u003eCALIBRATION GUIDE\u003c\/h1\u003e\n\u003cp style=\"margin: 0in;\" class=\"c16\"\u003e\u003cspan class=\"c0\"\u003e\u003cspan style=\"font-family: 'Arial',sans-serif; color: black;\"\u003eThere are 4 main adjustable components in an EVP Spec TAPP Clutch, these are:\u003c\/span\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp style=\"margin: 0in;\" class=\"c16\"\u003e \u003c\/p\u003e\n\u003cp style=\"margin: 0in; text-align: justify;\" class=\"c22\"\u003e\u003cspan class=\"c5\"\u003e\u003cb\u003e\u003cspan style=\"font-family: 'Arial',sans-serif; color: black;\"\u003eRamp \u003c\/span\u003e\u003c\/b\u003e\u003c\/span\u003e\u003cspan class=\"c2\"\u003e\u003cb\u003e\u003cspan style=\"font-family: 'Arial',sans-serif; color: black;\"\u003eP\u003c\/span\u003e\u003c\/b\u003e\u003c\/span\u003e\u003cspan class=\"c5\"\u003e\u003cb\u003e\u003cspan style=\"font-family: 'Arial',sans-serif; color: black;\"\u003erofile\u003c\/span\u003e\u003c\/b\u003e\u003c\/span\u003e\u003cspan class=\"c5\"\u003e\u003cspan style=\"font-family: 'Arial',sans-serif; color: black;\"\u003e - \u003c\/span\u003e\u003c\/span\u003e\u003cspan class=\"c0\"\u003e\u003cspan style=\"font-family: 'Arial',sans-serif; color: black;\"\u003eYour TAPP clutch comes with a set of pre-chosen ramps that have been tested in many scenarios and have been deemed to be the most generic in most situations. Changing the angle or profile of the ramp will have many effects on the shift profile. This should only be done by an experienced tuner; you will likely not need to change this.\u003c\/span\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp style=\"margin: 0in; text-align: justify;\" class=\"c22\"\u003e \u003c\/p\u003e\n\u003cp style=\"margin: 0in; text-align: justify;\" class=\"c22\"\u003e\u003cspan class=\"c5\"\u003e\u003cb\u003e\u003cspan style=\"font-family: 'Arial',sans-serif; color: black;\"\u003eRamp \u003c\/span\u003e\u003c\/b\u003e\u003c\/span\u003e\u003cspan class=\"c2\"\u003e\u003cb\u003e\u003cspan style=\"font-family: 'Arial',sans-serif; color: black;\"\u003eA\u003c\/span\u003e\u003c\/b\u003e\u003c\/span\u003e\u003cspan class=\"c5\"\u003e\u003cb\u003e\u003cspan style=\"font-family: 'Arial',sans-serif; color: black;\"\u003engle\u003c\/span\u003e\u003c\/b\u003e\u003c\/span\u003e\u003cspan class=\"c5\"\u003e\u003cspan style=\"font-family: 'Arial',sans-serif; color: black;\"\u003e - \u003c\/span\u003e\u003c\/span\u003e\u003cspan style=\"font-family: 'Arial',sans-serif; color: black;\"\u003eThe ramp angle in your TAPP Clutch is adjustable from the outside via the use of the Quick Shift Bolts. As with other clicker style clutches, the higher the number, the higher the RPM. This will mainly affect the full shift speed but also affects the engagement and low speed slightly. \u003cspan class=\"c2\"\u003e\u003cb\u003eIMPORTANT\u003c\/b\u003e\u003c\/span\u003e \u003cspan class=\"c14\"\u003e\u003cb\u003e- Always adjust the ramp angle in pairs across from each other. If you do not, the clutch will be out of balance.\u003c\/b\u003e\u003c\/span\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp style=\"margin: 0in; text-align: justify;\" class=\"c22\"\u003e \u003c\/p\u003e\n\u003cp style=\"margin: 0in; text-align: justify;\" class=\"c19\"\u003e\u003cspan class=\"c5\"\u003e\u003cb\u003e\u003cspan style=\"font-family: 'Arial',sans-serif; color: black;\"\u003eRoller \u003c\/span\u003e\u003c\/b\u003e\u003c\/span\u003e\u003cspan class=\"c2\"\u003e\u003cb\u003e\u003cspan style=\"font-family: 'Arial',sans-serif; color: black;\"\u003eS\u003c\/span\u003e\u003c\/b\u003e\u003c\/span\u003e\u003cspan class=\"c5\"\u003e\u003cb\u003e\u003cspan style=\"font-family: 'Arial',sans-serif; color: black;\"\u003eize\u003c\/span\u003e\u003c\/b\u003e\u003c\/span\u003e\u003cspan class=\"c5\"\u003e\u003cspan style=\"font-family: 'Arial',sans-serif; color: black;\"\u003e - \u003c\/span\u003e\u003c\/span\u003e\u003cspan style=\"font-family: 'Arial',sans-serif; color: black;\"\u003eYour clutch was shipped with a predetermined roller size for your application. There are 3 sizes of rollers available: standard, 1mm oversize, and 2mm oversize. Bigger rollers make the low end \"quicker RPM's\" but shift out quicker and lower the full shift RPM. Smaller rollers make the engine slower shift and raise the full shift RPM. This has to do with the angle of the arms combined with the weight difference of the rollers. \u003cspan class=\"c2\"\u003e\u003cb\u003eIMPORTANT\u003c\/b\u003e\u003c\/span\u003e \u003cspan class=\"c2\"\u003e\u003cb\u003e- As with the ramp angle, roller size must be done in pairs across from each other. Failure to do so will result in an imbalance of the clutch and possibly failure.\u003c\/b\u003e\u003c\/span\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp style=\"margin: 0in; text-align: justify;\" class=\"c19\"\u003e \u003c\/p\u003e\n\u003cp style=\"margin: 0in; text-align: justify;\" class=\"c22\"\u003e\u003cspan class=\"c5\"\u003e\u003cb\u003e\u003cspan style=\"font-family: 'Arial',sans-serif; color: black;\"\u003eWeight \u003c\/span\u003e\u003c\/b\u003e\u003c\/span\u003e\u003cspan class=\"c2\"\u003e\u003cb\u003e\u003cspan style=\"font-family: 'Arial',sans-serif; color: black;\"\u003eA\u003c\/span\u003e\u003c\/b\u003e\u003c\/span\u003e\u003cspan class=\"c5\"\u003e\u003cb\u003e\u003cspan style=\"font-family: 'Arial',sans-serif; color: black;\"\u003edjustment\u003c\/span\u003e\u003c\/b\u003e\u003c\/span\u003e\u003cspan style=\"font-family: 'Arial',sans-serif; color: black;\"\u003e - The weight in the arms can be adjusted in two ways: set screws in the arms, and washers on the roller thru bolt. As with all other clutches, add weight to lower RPM, remove weight to raise RPM. Set screws in the arms affect the low-speed shift points more than the high speed and will reduce the max RPM, and weight on the roller bolt acts like tip weight in a conventional clutch affecting the high speed more than any other part of the curve. Adjust this as needed for your application. \u003cspan class=\"c14\"\u003e\u003cb\u003eIMPORTANT - As with all other adjustments, do this evenly and only in pairs across from each other, failure to do so will result in an imbalance of the clutch and possible failure.\u003c\/b\u003e\u003c\/span\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003ch1\u003eFITMENT\u003c\/h1\u003e\n\u003cp\u003e2016-'22 Can-Am Defender 1000 models\u003c\/p\u003e\n\u003ch1\u003eINSTRUCTIONS\u003c\/h1\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0054\/6786\/5134\/files\/TAPP_x_Evolution_Clutching_Instructions_5082fa6d-9f99-4a72-897b-01ace9ddc3e9.pdf?v=1735826952\" rel=\"noopener\" target=\"_blank\"\u003eEVP TAPP Primary Clutch Instructions for Defender\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cmeta charset=\"utf-8\"\u003e\u003ca rel=\"noopener\" href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0054\/6786\/5134\/files\/Defender_DT130_195_Clutch_Kits.pdf?v=1735826952\" target=\"_blank\"\u003eCan-Am Defender HD10 Custom Clutch Kit for EVP DT-130 \u0026amp; DT-195 Turbo System\u003c\/a\u003e\u003c\/p\u003e","brand":"TAPP","offers":[{"title":"2020+ HD10 DT-130 Turbo System 2300 RPM","offer_id":40521456943150,"sku":"2282010047","price":2700.0,"currency_code":"USD","in_stock":true},{"title":"2020+ HD10 DT-195 Turbo System 2300 RPM","offer_id":40521456975918,"sku":"2282010048","price":2700.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0054\/6786\/5134\/files\/tapp_clutch_1_2e350496-8133-466a-9338-065c47574be1.jpg?v=1708458111"},{"product_id":"polaris-rzr-pro-r-tapp-primary-clutch-kit-by-evp","title":"EVP TAPP Roller Primary Clutch Kit for Polaris RZR Pro R","description":"\u003ch1 data-mce-fragment=\"1\"\u003eDESCRIPTION\u003c\/h1\u003e\n\u003cp\u003e\u003cspan data-mce-fragment=\"1\"\u003e\u003c\/span\u003e\u003cmeta charset=\"utf-8\"\u003e\u003cspan data-mce-fragment=\"1\"\u003eDon't think a TAPP clutch can be any smoother and more responsive than it already is? Think again. The all-new Roller Spider design for TAPP Primary Clutches replaces the original button spider assembly for instant power delivery due to the reduction in friction between the spider and movable sheave. This results in even better belt grip than before, lower belt temps, better belt life, and buttery smooth engagement that's guaranteed to keep your car dialed in any riding condition.\u003c\/span\u003e\u003cspan data-mce-fragment=\"1\"\u003e The patent-pending TAPP Roller Primary Clutch is the next revolution in clutching technology.\u003c\/span\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eUPDATED FEATURES:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eROLLER SPIDER DESIGN:\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003ecreates less friction in the movable sheave compared to button spiders for a much more responsive setup\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCENTER BEARING: \u003c\/strong\u003eNEW black nitrate coating (black finish) adds an extra layer of hardness, prevents rust corrosion, and reduces friction for even smoother clutch operation\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLARGER ROLLER:\u003c\/strong\u003e roller size has been increased from 2mm to 3mm, making a huge difference in longevity of the clutch bearing particularly under high horsepower and harsh conditions\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePOST: \u003c\/strong\u003eupdated with additional material and new heat-treating process, allowing the clutch to be over-torqued from factory specs by preventing the clutch from slipping on the shaft (necessary for high-horsepower builds and\/or drag racing setups)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMOVEABLE SHEAVE: \u003c\/strong\u003eadded material with the new roller spider design, reinforcing the clutch towers for greater load-bearing capabilities\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCLUTCH COVER:\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003ethe billet aluminum clutch cover now features larger \"windows\" to allow additional weight without having to modify the clutch cover\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eORIGINAL FEATURES:\u003cbr\u003e\u003c\/strong\u003eMake your RZR Pro R reach its full potential with the smoothest, quietest, and most responsive primary clutch available. After amazing results running TAPP primaries on all EVP Sand Outlaws Series race cars this season, we're stoked to now offer this bulletproof setup for the powerful Polaris RZR Pro R platform. With calibrations available for the EVP Stage 1-3 ECU tuning package as well as stock-tuned Pro R's, coupled with the insanely convenient adjustability of a TAPP primary clutch‚ this is the ultimate bolt-on-and-ride upgrade to get the most out of any power level.\u003c\/p\u003e\n\u003cp\u003e\u003cmeta charset=\"utf-8\"\u003eEVP Spec TAPP Primary Clutches are calibrated for use with the stock secondary clutch, reusing the OEM primary clutch bolt with the included TAPP spacer for installation. EVP calibrated TAPP clutches are the most fine-tuned, responsive and dependable Polaris Pro R primary clutches available. Experience throttle response that pins your back to the seat, responsive power put down via excellent belt grip, plus cooler clutch operating temps for enhanced belt and clutch life.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eDURABLE PERFORMANCE: \u003c\/strong\u003eDesigned with the durability that high-horsepower UTV's demand, TAPP clutches are built from billet aluminum and other high-tech materials that can withstand extreme heat and extend clutch life, so you can spend more time riding and less time in the shop. EVP has used TAPP clutches on our all-out drag race Can Am X3 and Polaris XPT vehicles with very high engagement launches without failure. The OEM primary clutch is reliable up to about 300 hp, but an EVP Spec TAPP primary can easily handle anything from 200-500+ hp and all terrain and riding styles - drag race, duning, trail riding, rock crawling, short course and desert racing - all with the unrivaled quality, durability and performance expected out of a TAPP Clutch.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eADJUSTABLE \u0026amp; VERSATILE: \u003c\/strong\u003eTAPP clutches are a game-changer when it comes to tuning and adjustability, allowing your clutch to easily evolve as your UTV's power level evolves. The two-sided ramps are swapped in minutes with just an Allen wrench. The clickers are adjusted externally, which can raise or lower the entire shift pattern easily. The roller arms allow mass to be added or removed by removing the clutch cover, and there are a variety of TAPP and EVP primary springs available for fine-tuning. Lastly, the TAPP clutch is also extremely forgiving, allowing a wide variety of helix angles to work with a given primary clutch calibration.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCOOLER TEMPS: \u003c\/strong\u003eTAPP primary clutches run cooler than any clutch on the market. High-tech materials, extensive venting for optimum airflow, and cooler belt temperatures thanks to the multi-angle curved sheaves all contribute to extending belt and overall clutch life‚ even under the most demanding abuse.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eINSTANT THROTTLE RESPONSE: \u003c\/strong\u003eTAPP primary clutches are intended for customers that demand responsiveness and durability from their CVT drive system whether their UTV is relatively stock or all-out big turbo drag race trim. The centralized mass and lightweight, low-inertia design coupled with multi-angled curved sheaves and custom ramp angles deliver unbeatable belt grip, instantaneous throttle response and surefire power to the ground.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSMOOTH, QUIET OPERATION:\u003c\/strong\u003e The arms don't 'swing out' like a traditional flyweight but instead ride on a ramp system, which allows the clutch to be remarkably smooth and perform with minimal vibration. You will feel and hear the difference.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eRunning a non-EVP tune and still want to enjoy all the benefits and performance of an EVP Spec TAPP primary clutch? No problem! TAPP clutches are renowned for being incredibly easy to tune and adjust. RPM engagement can be increased simply by flipping the ramps from side A to side B. Flipping two ramps to side B will increase engagement by 600-800 RPM, flipping all four ramps to side B can increase engagement even higher. Additionally, the adjustable clicker bolts can raise or lower engagement by 50-RPM increments for further fine-tuning.\u003c\/p\u003e\n\u003cp\u003e\u003cem\u003e\u003cstrong\u003eDISCLAIMER:\u003c\/strong\u003e All EVP Calibrated Tapp Clutch primaries may require minor calibration changes. If you need tuning support, please reference our instructions page or contact our technical department.\u003c\/em\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eAll EVP TAPP primary clutch kits include full standard weight kit as well as tungsten TAPP Clutch Race Weights (set of 8).\u003c\/strong\u003e\u003c\/p\u003e\n\u003ch1\u003eCLUTCH CALIBRATION GUIDE\u003c\/h1\u003e\n\u003cp class=\"c16\" style=\"margin: 0in;\"\u003e\u003cspan class=\"c0\"\u003e\u003cspan style=\"font-family: 'Arial',sans-serif; color: black;\"\u003eThere are 4 main adjustable components in an EVP Spec TAPP Clutch, these are:\u003c\/span\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp class=\"c22\" style=\"margin: 0in; text-align: justify;\"\u003e\u003cspan class=\"c5\"\u003e\u003cb\u003e\u003cspan style=\"font-family: 'Arial',sans-serif; color: black;\"\u003eRamp \u003c\/span\u003e\u003c\/b\u003e\u003c\/span\u003e\u003cspan class=\"c2\"\u003e\u003cb\u003e\u003cspan style=\"font-family: 'Arial',sans-serif; color: black;\"\u003eP\u003c\/span\u003e\u003c\/b\u003e\u003c\/span\u003e\u003cspan class=\"c5\"\u003e\u003cb\u003e\u003cspan style=\"font-family: 'Arial',sans-serif; color: black;\"\u003erofile\u003c\/span\u003e\u003c\/b\u003e\u003c\/span\u003e\u003cspan class=\"c5\"\u003e\u003cspan style=\"font-family: 'Arial',sans-serif; color: black;\"\u003e - \u003c\/span\u003e\u003c\/span\u003e\u003cspan class=\"c0\"\u003e\u003cspan style=\"font-family: 'Arial',sans-serif; color: black;\"\u003eYour TAPP clutch comes with a set of pre-chosen ramps that have been tested in many scenarios and have been deemed to be the most generic in most situations. Changing the angle or profile of the ramp will have many effects on the shift profile. This should only be done by an experienced tuner; you will likely not need to change this.\u003c\/span\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp class=\"c22\" style=\"margin: 0in; text-align: justify;\"\u003e \u003c\/p\u003e\n\u003cp class=\"c22\" style=\"margin: 0in; text-align: justify;\"\u003e\u003cspan class=\"c5\"\u003e\u003cb\u003e\u003cspan style=\"font-family: 'Arial',sans-serif; color: black;\"\u003eRamp \u003c\/span\u003e\u003c\/b\u003e\u003c\/span\u003e\u003cspan class=\"c2\"\u003e\u003cb\u003e\u003cspan style=\"font-family: 'Arial',sans-serif; color: black;\"\u003eA\u003c\/span\u003e\u003c\/b\u003e\u003c\/span\u003e\u003cspan class=\"c5\"\u003e\u003cb\u003e\u003cspan style=\"font-family: 'Arial',sans-serif; color: black;\"\u003engle\u003c\/span\u003e\u003c\/b\u003e\u003c\/span\u003e\u003cspan class=\"c5\"\u003e\u003cspan style=\"font-family: 'Arial',sans-serif; color: black;\"\u003e - \u003c\/span\u003e\u003c\/span\u003e\u003cspan style=\"font-family: 'Arial',sans-serif; color: black;\"\u003eThe ramp angle in your TAPP Clutch is adjustable from the outside via the use of the Quick Shift Bolts. As with other clicker style clutches, the higher the number, the higher the RPM. This will mainly affect the full shift speed but also affects the engagement and low speed slightly. \u003cspan class=\"c2\"\u003e\u003cb\u003eIMPORTANT\u003c\/b\u003e\u003c\/span\u003e \u003cspan class=\"c14\"\u003e\u003cb\u003e- Always adjust the ramp angle in pairs across from each other. If you do not, the clutch will be out of balance.\u003c\/b\u003e\u003c\/span\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp class=\"c22\" style=\"margin: 0in; text-align: justify;\"\u003e \u003c\/p\u003e\n\u003cp class=\"c19\" style=\"margin: 0in; text-align: justify;\"\u003e\u003cspan class=\"c5\"\u003e\u003cb\u003e\u003cspan style=\"font-family: 'Arial',sans-serif; color: black;\"\u003eRoller \u003c\/span\u003e\u003c\/b\u003e\u003c\/span\u003e\u003cspan class=\"c2\"\u003e\u003cb\u003e\u003cspan style=\"font-family: 'Arial',sans-serif; color: black;\"\u003eS\u003c\/span\u003e\u003c\/b\u003e\u003c\/span\u003e\u003cspan class=\"c5\"\u003e\u003cb\u003e\u003cspan style=\"font-family: 'Arial',sans-serif; color: black;\"\u003eize\u003c\/span\u003e\u003c\/b\u003e\u003c\/span\u003e\u003cspan class=\"c5\"\u003e\u003cspan style=\"font-family: 'Arial',sans-serif; color: black;\"\u003e - \u003c\/span\u003e\u003c\/span\u003e\u003cspan style=\"font-family: 'Arial',sans-serif; color: black;\"\u003eYour clutch was shipped with a predetermined roller size for your application. There are 3 sizes of rollers available: standard, 1mm oversize, and 2mm oversize. Bigger rollers make the low end \"quicker RPM's\" but shift out quicker and lower the full shift RPM. Smaller rollers make the engine slower shift and raise the full shift RPM. This has to do with the angle of the arms combined with the weight difference of the rollers. \u003cspan class=\"c2\"\u003e\u003cb\u003eIMPORTANT\u003c\/b\u003e\u003c\/span\u003e \u003cspan class=\"c2\"\u003e\u003cb\u003e- As with the ramp angle, roller size must be done in pairs across from each other. Failure to do so will result in an imbalance of the clutch and possibly failure.\u003c\/b\u003e\u003c\/span\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp class=\"c19\" style=\"margin: 0in; text-align: justify;\"\u003e \u003c\/p\u003e\n\u003cp class=\"c22\" style=\"margin: 0in; text-align: justify;\"\u003e\u003cspan class=\"c5\"\u003e\u003cb\u003e\u003cspan style=\"font-family: 'Arial',sans-serif; color: black;\"\u003eWeight \u003c\/span\u003e\u003c\/b\u003e\u003c\/span\u003e\u003cspan class=\"c2\"\u003e\u003cb\u003e\u003cspan style=\"font-family: 'Arial',sans-serif; color: black;\"\u003eA\u003c\/span\u003e\u003c\/b\u003e\u003c\/span\u003e\u003cspan class=\"c5\"\u003e\u003cb\u003e\u003cspan style=\"font-family: 'Arial',sans-serif; color: black;\"\u003edjustment\u003c\/span\u003e\u003c\/b\u003e\u003c\/span\u003e\u003cspan style=\"font-family: 'Arial',sans-serif; color: black;\"\u003e - The weight in the arms can be adjusted in two ways: set screws in the arms, and washers on the roller thru bolt. As with all other clutches, add weight to lower RPM, remove weight to raise RPM. Set screws in the arms affect the low-speed shift points more than the high speed and will reduce the max RPM, and weight on the roller bolt acts like tip weight in a conventional clutch affecting the high speed more than any other part of the curve. Adjust this as needed for your application. \u003cspan class=\"c14\"\u003e\u003cb\u003eIMPORTANT - As with all other adjustments, do this evenly and only in pairs across from each other, failure to do so will result in an imbalance of the clutch and possible failure.\u003c\/b\u003e\u003c\/span\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003ch1 data-mce-fragment=\"1\"\u003e\u003cbr\u003e\u003c\/h1\u003e\n\u003ch1 data-mce-fragment=\"1\"\u003eFITMENT\u003c\/h1\u003e\n\u003cp\u003e2022+ Polaris RZR Pro R Models\u003c\/p\u003e\n\u003ch1 data-mce-fragment=\"1\"\u003eINSTRUCTIONS\u003c\/h1\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0054\/6786\/5134\/files\/TAPP_x_Evolution_Clutching_Instructions_bc3b4332-4612-424a-955a-4c130568cca2.pdf?v=1686159652\" target=\"_blank\"\u003e\u003cstrong\u003ePOLARIS RZR PRO R TAPP PRIMARY CLUTCH KIT by EVP\u003c\/strong\u003e\u003c\/a\u003e\u003cbr\u003e\u003c\/p\u003e","brand":"TAPP","offers":[{"title":"STOCK ECU + EVP ECU POWER FLASH STAGES 1-3 (2000 RPM)","offer_id":40156079849518,"sku":"2282020006","price":2800.0,"currency_code":"USD","in_stock":true},{"title":"P54-330 Turbo System 91 Octane (2200 RPM)","offer_id":40593014816814,"sku":"2282020003","price":2800.0,"currency_code":"USD","in_stock":true},{"title":"P54-400 Turbo System 110 Octane (2200 RPM)","offer_id":40521448325166,"sku":"2282020004","price":2800.0,"currency_code":"USD","in_stock":true},{"title":"P54-450 Turbo System 110 Octane (2200 RPM)","offer_id":40593014849582,"sku":"2282020005","price":2800.0,"currency_code":"USD","in_stock":true},{"title":"P54-500 Turbo System E85 (2200 RPM)","offer_id":40853967765550,"sku":"2282020016","price":2800.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0054\/6786\/5134\/files\/tapp_clutch_1_dd75c017-93c3-4c12-977e-9cd24dabd97e.jpg?v=1708458076"},{"product_id":"stm-tuner-secondary-clutch-for-2016-20-polaris-rzr-xp-turbo-s","title":"STM Tuner Secondary Clutch for 2016-'20 Polaris RZR XP Turbo\/S","description":"\u003ch1\u003eDESCRIPTION\u003c\/h1\u003e\n\u003cp\u003eWhether you're running an OEM, TAPP, or STM primary clutch, the STM Tuner Secondary is a must-have addition to get the absolute most out of any power level. STM Tuner Secondaries are all-billet construction and feature a finned design that creates more airflow within the clutch housing to help lower belt and all-around clutch temperatures. Additional features include significantly enhanced belt grip, STM's triple roller design for consistent up\/back shifts that are smoother and faster, and improved engine braking, among others.\u003c\/p\u003e\n\u003cp\u003e\u003cmeta charset=\"utf-8\"\u003e\u003cspan\u003eAll EVP STM Tuners come fully assembled and include a secondary spring\u003c\/span\u003e\u003cspan\u003e and helix spec'd to EVP's custom calibrations, as well as\u003c\/span\u003e\u003cspan\u003e hardware kit for installation (additional spring rates and helix angles are available directly through STM).\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003eFor best results, EVP recommends running the STM Tuner Secondary Clutch with our variety of EVP-Spec TAPP Primary Clutch Calibrations, \u003ca href=\"https:\/\/evopowersports.com\/products\/polaris-rzr-pro-xp-turbo-s-tapp-primary-clutch-kit-by-evp-mode\" target=\"_blank\"\u003e\u003cspan style=\"color: #ff2a00;\" data-mce-style=\"color: #ff2a00;\"\u003e\u003cstrong\u003eAVAILABLE HERE\u003c\/strong\u003e\u003c\/span\u003e\u003c\/a\u003e.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eAll-billet construction for added durability and reliability\u003c\/li\u003e\n\u003cli\u003eFinned secondary design provides more airflow for lower belt and clutch temps\u003c\/li\u003e\n\u003cli\u003eIncludes secondary\u003c\/li\u003e\n\u003cli\u003eIncludes helix\u003c\/li\u003e\n\u003cli\u003eAdditional spring rates and helix angles available directly through STM\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch1\u003eFITMENT\u003c\/h1\u003e\n\u003cp\u003e2016-'20 Polaris RZR XP Turbo \u0026amp; Turbo S Models \u003c\/p\u003e\n\u003ch1\u003eSTM WARRANTY\u003c\/h1\u003e\n\u003cp\u003e\u003cspan\u003e\u003cstrong\u003eSTM POWERSPORTS WARRANTY \u0026amp; RETURN POLICY (FOR STM CLUTCHING COMPONENTS)\u003c\/strong\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003eSeller warrants solely to Buyer that each product supplied under these Terms will, for 90 days from the date of the original purchase (the 'Warranty Period'), conform to Seller's written specifications during normal use and\/or operation. Seller's sole and exclusive obligation, and Buyer's sole remedy for failure of any product to conform to the above warranty is, at the option of Seller, repair or replacement of the non-conforming product or a refund of the monies paid by Buyer for the non-conforming product. Buyer must notify Seller in writing during the Warranty Period of any failure by a product to conform to the above warranty. \u003c\/p\u003e\n\u003cp\u003eBuyer will pay for shipping of any non-conforming product to Seller and Seller will pay for return shipping to Buyer. Liability under this warranty will be reduced to the extent that:\u003c\/p\u003e\n\u003col\u003e\n\u003cli\u003eThe product is not maintained according to Seller's or the applicable manufacturer's specifications.\u003c\/li\u003e\n\u003cli\u003eThe product fails, malfunctions, or is damaged as a result of improper handling, improper storage conditions (including, but not limited to, where applicable, temperature and humidity), installation, maintenance, removal, modification or repair.\u003c\/li\u003e\n\u003cli\u003eThe non-conformity is caused by casualty, abuse, or improper use\u003c\/li\u003e\n\u003cli\u003eThe product is altered other than by Seller or with Seller's express written approval.\u003c\/li\u003e\n\u003cli\u003eThe product is installed, used, or configured other than as contemplated by the parties under the applicable Supply Agreement or at or in a place other than that contemplated by the parties under the applicable Supply Agreement.\u003c\/li\u003e\n\u003cli\u003eThe product is used, operated, or connected with a third-party good or software not expressly designated by Seller's documentation and specifications for the product.\u003c\/li\u003e\n\u003cli\u003eAny failure results from a design or specification supplied by Buyer.   Seller does not warrant any electrical components, normal wear and tear, or conditions resulting from misuse, abuse, negligence, accident, improper application, improper installation and\/or improper alteration.\u003c\/li\u003e\n\u003c\/ol\u003e\n\u003cp\u003ePrimary and secondary clutches that are determined to have a defect in material or manufacturing will be replaced at no charge within 90 days of original purchase date. Any racing application is void from warranty. Warranty claims require the return of the product in its original packaging. A $75.00 fee will be charged for inspection.\u003c\/p\u003e\n\u003cp\u003eSeller will determine, in its sole discretion, if any claims of failure were due to a defect in material or manufacturing. Warranty of premature wear will be determined by Seller, in its sole discretion. Buyer is responsible for shipping the alleged failed component to Seller and the return for warranty inspection. This warranty does not apply to any vehicle that has been altered in any way to include performance enhancements to the engine other than the original equipment design. \u003c\/p\u003e\n\u003cp\u003eElectrical components are not covered under any warranty and cannot be returned once installed or connected to power. Electrical components include but are not limited to: switches, ignition coils, CDI boxes, chips and regulators. Seller reserves the right to make the determination if the part has been subject to normal wear, misuse, abuse, negligence, accident, improper application, improper installation or alteration, and any such determination shall be final.\u003c\/p\u003e\n\u003cp\u003eAll warranty claims will be handled directly by the Seller. To obtain service under this warranty please contact the Seller for return authorization. Cost of removal, reinstallation, product pickup and delivery are the sole responsibility of the original Buyer. Retail customers must provide proof of purchase within 90 days for warranty to be honored.\u003c\/p\u003e\n\u003cp\u003eALL RETURNS FOR WARRANTY MUST BE PRE-APPROVED WITH AN RETURN AUTHORIZATION NUMBER DISPLAYED ON THE BOX. PRODUCT MUST BE RECEIVED WITHIN 10 DAYS OF DATE RETURN AUTHORIZATION IS ISSUED.\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e","brand":"STM","offers":[{"title":"Default Title","offer_id":40173532938286,"sku":"2272020005","price":1133.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0054\/6786\/5134\/products\/STM_TunerSecondary_RZR.webp?v=1673300314"},{"product_id":"stm-tuner-secondary-clutch-for-2020-polaris-rzr-pro-xp","title":"STM Tuner Secondary Clutch for 2020 Polaris RZR Pro XP","description":"\u003ch1\u003eDESCRIPTION\u003c\/h1\u003e\n\u003cp\u003eWhether you're running an OEM, TAPP, or STM primary clutch, the STM Tuner Secondary is a must-have addition to get the absolute most out of any power level. STM Tuner Secondaries are all-billet construction and feature a finned design that creates more airflow within the clutch housing to help lower belt and all-around clutch temperatures. Additional features include significantly enhanced belt grip, STM's triple roller design for consistent up\/back shifts that are smoother and faster, and improved engine braking, among others.\u003c\/p\u003e\n\u003cp\u003eAll EVP STM Tuners come fully assembled and include a secondary spring and helix spec'd to EVP's custom calibrations, as well as hardware kit for installation (additional spring rates and helix angles are available directly through STM).\u003c\/p\u003e\n\u003cp\u003eFor best results, EVP recommends running the STM Tuner Secondary Clutch with our variety of EVP-Spec TAPP Primary Clutch Calibrations, \u003cspan style=\"color: #ff2a00;\"\u003e\u003ca style=\"color: #ff2a00;\" href=\"https:\/\/evopowersports.com\/products\/polaris-rzr-pro-xp-turbo-s-tapp-primary-clutch-kit-by-evp-mode\" target=\"_blank\"\u003e\u003cstrong\u003eAVAILABLE HERE\u003c\/strong\u003e\u003c\/a\u003e\u003c\/span\u003e.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eAll-billet construction for added durability and reliability\u003c\/li\u003e\n\u003cli\u003eFinned secondary design provides more airflow for lower belt and clutch temps\u003c\/li\u003e\n\u003cli\u003eIncludes secondary spring\u003c\/li\u003e\n\u003cli\u003eIncludes helix\u003c\/li\u003e\n\u003cli\u003eAdditional spring rates and helix angles available directly through STM\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch1\u003eFITMENT\u003c\/h1\u003e\n\u003cp\u003e2020 Polaris RZR Pro XP Models\u003c\/p\u003e\n\u003ch1\u003eSTM WARRANTY\u003c\/h1\u003e\n\u003cp\u003e\u003cspan\u003e\u003cstrong\u003eSTM POWERSPORTS WARRANTY \u0026amp; RETURN POLICY (FOR STM CLUTCHING COMPONENTS)\u003c\/strong\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003eSeller warrants solely to Buyer that each product supplied under these Terms will, for 90 days from the date of the original purchase (the 'Warranty Period'), conform to Seller's written specifications during normal use and\/or operation. Seller's sole and exclusive obligation, and Buyer's sole remedy for failure of any product to conform to the above warranty is, at the option of Seller, repair or replacement of the non-conforming product or a refund of the monies paid by Buyer for the non-conforming product. Buyer must notify Seller in writing during the Warranty Period of any failure by a product to conform to the above warranty. \u003c\/p\u003e\n\u003cp\u003eBuyer will pay for shipping of any non-conforming product to Seller and Seller will pay for return shipping to Buyer. Liability under this warranty will be reduced to the extent that:\u003c\/p\u003e\n\u003col\u003e\n\u003cli\u003eThe product is not maintained according to Seller's or the applicable manufacturer's specifications.\u003c\/li\u003e\n\u003cli\u003eThe product fails, malfunctions, or is damaged as a result of improper handling, improper storage conditions (including, but not limited to, where applicable, temperature and humidity), installation, maintenance, removal, modification or repair.\u003c\/li\u003e\n\u003cli\u003eThe non-conformity is caused by casualty, abuse, or improper use\u003c\/li\u003e\n\u003cli\u003eThe product is altered other than by Seller or with Seller's express written approval.\u003c\/li\u003e\n\u003cli\u003eThe product is installed, used, or configured other than as contemplated by the parties under the applicable Supply Agreement or at or in a place other than that contemplated by the parties under the applicable Supply Agreement.\u003c\/li\u003e\n\u003cli\u003eThe product is used, operated, or connected with a third-party good or software not expressly designated by Seller's documentation and specifications for the product.\u003c\/li\u003e\n\u003cli\u003eAny failure results from a design or specification supplied by Buyer.   Seller does not warrant any electrical components, normal wear and tear, or conditions resulting from misuse, abuse, negligence, accident, improper application, improper installation and\/or improper alteration.\u003c\/li\u003e\n\u003c\/ol\u003e\n\u003cp\u003ePrimary and secondary clutches that are determined to have a defect in material or manufacturing will be replaced at no charge within 90 days of original purchase date. Any racing application is void from warranty. Warranty claims require the return of the product in its original packaging. A $75.00 fee will be charged for inspection.\u003c\/p\u003e\n\u003cp\u003eSeller will determine, in its sole discretion, if any claims of failure were due to a defect in material or manufacturing. Warranty of premature wear will be determined by Seller, in its sole discretion. Buyer is responsible for shipping the alleged failed component to Seller and the return for warranty inspection. This warranty does not apply to any vehicle that has been altered in any way to include performance enhancements to the engine other than the original equipment design. \u003c\/p\u003e\n\u003cp\u003eElectrical components are not covered under any warranty and cannot be returned once installed or connected to power. Electrical components include but are not limited to: switches, ignition coils, CDI boxes, chips and regulators. Seller reserves the right to make the determination if the part has been subject to normal wear, misuse, abuse, negligence, accident, improper application, improper installation or alteration, and any such determination shall be final.\u003c\/p\u003e\n\u003cp\u003eAll warranty claims will be handled directly by the Seller. To obtain service under this warranty please contact the Seller for return authorization. Cost of removal, reinstallation, product pickup and delivery are the sole responsibility of the original Buyer. Retail customers must provide proof of purchase within 90 days for warranty to be honored.\u003c\/p\u003e\n\u003cp\u003eALL RETURNS FOR WARRANTY MUST BE PRE-APPROVED WITH AN RETURN AUTHORIZATION NUMBER DISPLAYED ON THE BOX. PRODUCT MUST BE RECEIVED WITHIN 10 DAYS OF DATE RETURN AUTHORIZATION IS ISSUED.\u003c\/p\u003e","brand":"STM","offers":[{"title":"Default Title","offer_id":40173536411694,"sku":"2272020006","price":1159.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0054\/6786\/5134\/products\/STM_TunerSecondary_RZR_fa124d2f-3770-4074-962c-2a9d9f402535.webp?v=1673301019"},{"product_id":"stm-tuner-secondary-clutch-for-2021-polaris-rzr-xp-turbo-s-2021-22-pro-xp-2022-turbo-r","title":"STM Tuner Secondary Clutch for 2021 Polaris RZR XP Turbo\/S, 2021-'22 Pro XP \u0026 2022+ Turbo R","description":"\u003ch1\u003eDESCRIPTION\u003c\/h1\u003e\n\u003cp\u003eWhether you're running an OEM, TAPP, or STM primary clutch, the STM Tuner Secondary is a must-have addition to get the absolute most out of any power level. STM Tuner Secondaries are all-billet construction and feature a finned design that creates more airflow within the clutch housing to help lower belt and all-around clutch temperatures. Additional features include significantly enhanced belt grip, STM's triple roller design for consistent up\/back shifts that are smoother and faster, and improved engine braking, among others.\u003c\/p\u003e\n\u003cp\u003e\u003cmeta charset=\"utf-8\"\u003e\u003cspan\u003eAll EVP STM Tuners come fully assembled and include a secondary spring\u003c\/span\u003e\u003cspan\u003e and helix spec'd to EVP's custom calibrations, as well as\u003c\/span\u003e\u003cspan\u003e hardware kit for installation (additional spring rates and helix angles are available directly through STM).\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003eFor best results, EVP recommends running the STM Tuner Secondary Clutch with our variety of EVP-Spec TAPP Primary Clutch Calibrations, \u003ca href=\"https:\/\/evopowersports.com\/collections\/tapp-clutching\" target=\"_blank\" rel=\"noopener\"\u003e\u003cspan style=\"color: #ff2a00;\"\u003e\u003cstrong\u003eAVAILABLE HERE\u003c\/strong\u003e\u003c\/span\u003e\u003c\/a\u003e.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eAll-billet construction for added durability and reliability\u003c\/li\u003e\n\u003cli\u003eFinned secondary design provides more airflow for lower belt and clutch temps\u003c\/li\u003e\n\u003cli\u003eIncludes secondary spring\u003c\/li\u003e\n\u003cli\u003eIncludes helix\u003c\/li\u003e\n\u003cli\u003eAdditional spring rates and helix angles available directly through STM\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch1\u003eFITMENT\u003c\/h1\u003e\n\u003cp\u003e2021 Polaris RZR XP Turbo \u0026amp; Turbo S Models\u003cbr\u003e2021-'22 Polaris RZR Pro XP Models\u003cbr\u003e2022+ Polaris RZR Turbo R Models\u003c\/p\u003e\n\u003ch1\u003eSTM WARRANTY\u003c\/h1\u003e\n\u003cp\u003e\u003cspan\u003e\u003cstrong\u003eSTM POWERSPORTS WARRANTY \u0026amp; RETURN POLICY (FOR STM CLUTCHING COMPONENTS)\u003c\/strong\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003eSeller warrants solely to Buyer that each product supplied under these Terms will, for 90 days from the date of the original purchase (the 'Warranty Period'), conform to Seller's written specifications during normal use and\/or operation. Seller's sole and exclusive obligation, and Buyer's sole remedy for failure of any product to conform to the above warranty is, at the option of Seller, repair or replacement of the non-conforming product or a refund of the monies paid by Buyer for the non-conforming product. Buyer must notify Seller in writing during the Warranty Period of any failure by a product to conform to the above warranty.\u003c\/p\u003e\n\u003cp\u003eBuyer will pay for shipping of any non-conforming product to Seller and Seller will pay for return shipping to Buyer. Liability under this warranty will be reduced to the extent that:\u003c\/p\u003e\n\u003col\u003e\n\u003cli\u003eThe product is not maintained according to Seller's or the applicable manufacturer's specifications.\u003c\/li\u003e\n\u003cli\u003eThe product fails, malfunctions, or is damaged as a result of improper handling, improper storage conditions (including, but not limited to, where applicable, temperature and humidity), installation, maintenance, removal, modification or repair.\u003c\/li\u003e\n\u003cli\u003eThe non-conformity is caused by casualty, abuse, or improper use\u003c\/li\u003e\n\u003cli\u003eThe product is altered other than by Seller or with Seller's express written approval.\u003c\/li\u003e\n\u003cli\u003eThe product is installed, used, or configured other than as contemplated by the parties under the applicable Supply Agreement or at or in a place other than that contemplated by the parties under the applicable Supply Agreement.\u003c\/li\u003e\n\u003cli\u003eThe product is used, operated, or connected with a third-party good or software not expressly designated by Seller's documentation and specifications for the product.\u003c\/li\u003e\n\u003cli\u003eAny failure results from a design or specification supplied by Buyer. Seller does not warrant any electrical components, normal wear and tear, or conditions resulting from misuse, abuse, negligence, accident, improper application, improper installation and\/or improper alteration.\u003c\/li\u003e\n\u003c\/ol\u003e\n\u003cp\u003ePrimary and secondary clutches that are determined to have a defect in material or manufacturing will be replaced at no charge within 90 days of original purchase date. Any racing application is void from warranty. Warranty claims require the return of the product in its original packaging. A $75.00 fee will be charged for inspection.\u003c\/p\u003e\n\u003cp\u003eSeller will determine, in its sole discretion, if any claims of failure were due to a defect in material or manufacturing. Warranty of premature wear will be determined by Seller, in its sole discretion. Buyer is responsible for shipping the alleged failed component to Seller and the return for warranty inspection. This warranty does not apply to any vehicle that has been altered in any way to include performance enhancements to the engine other than the original equipment design.\u003c\/p\u003e\n\u003cp\u003eElectrical components are not covered under any warranty and cannot be returned once installed or connected to power. Electrical components include but are not limited to: switches, ignition coils, CDI boxes, chips and regulators. Seller reserves the right to make the determination if the part has been subject to normal wear, misuse, abuse, negligence, accident, improper application, improper installation or alteration, and any such determination shall be final.\u003c\/p\u003e\n\u003cp\u003eAll warranty claims will be handled directly by the Seller. To obtain service under this warranty please contact the Seller for return authorization. Cost of removal, reinstallation, product pickup and delivery are the sole responsibility of the original Buyer. Retail customers must provide proof of purchase within 90 days for warranty to be honored.\u003c\/p\u003e\n\u003cp\u003eALL RETURNS FOR WARRANTY MUST BE PRE-APPROVED WITH AN RETURN AUTHORIZATION NUMBER DISPLAYED ON THE BOX. PRODUCT MUST BE RECEIVED WITHIN 10 DAYS OF DATE RETURN AUTHORIZATION IS ISSUED.\u003c\/p\u003e","brand":"STM","offers":[{"title":"Default Title","offer_id":40173537853486,"sku":"2272020007","price":1164.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0054\/6786\/5134\/products\/STM_TunerSecondary_RZR_bcc4577a-eddc-45b7-bf88-0b8374beb6a3.webp?v=1673301197"},{"product_id":"evp-tapp-primary-clutch-kit-for-polaris-rzr-pro-xp-turbo-r","title":"EVP TAPP Roller Primary Clutch Kit for Polaris RZR Pro XP \u0026 Turbo R\/Pro S","description":"\u003ch1\u003eDESCRIPTION\u003c\/h1\u003e\n\u003cp\u003e\u003cspan\u003e\u003cstrong\u003eNEW EVP TAPP CLUTCH UPDATES (2024):\u003c\/strong\u003e\u003cbr\u003e\u003c\/span\u003e\u003cmeta charset=\"utf-8\"\u003e\u003cspan\u003eDon't think a TAPP clutch can be any smoother and more responsive than it already is? Think again. The all-new Roller Spider design for TAPP Primary Clutches replaces the original button spider assembly for instant power delivery due to the reduction in friction between the spider and movable sheave. This results in even better belt grip than before, lower belt temps, better belt life, and buttery smooth engagement that's guaranteed to keep your car dialed in any riding condition.\u003c\/span\u003e\u003cspan\u003e The patent-pending TAPP Roller Primary Clutch is the next revolution in clutching technology.\u003c\/span\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eUPDATED FEATURES:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eROLLER SPIDER DESIGN:\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003ecreates less friction in the movable sheave compared to button spiders for a much more responsive setup\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCENTER BEARING: \u003c\/strong\u003eNEW black nitrate coating (black finish) adds an extra layer of hardness, prevents rust corrosion, and reduces friction for even smoother clutch operation\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLARGER ROLLER:\u003c\/strong\u003e roller size has been increased from 2mm to 3mm, making a huge difference in longevity of the clutch bearing particularly under high horsepower and harsh conditions\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePOST: \u003c\/strong\u003eupdated with additional material and new heat-treating process, allowing the clutch to be over-torqued from factory specs by preventing the clutch from slipping on the shaft (necessary for high-horsepower builds and\/or drag racing setups)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMOVEABLE SHEAVE: \u003c\/strong\u003eadded material with the new roller spider design, reinforcing the clutch towers for greater load-bearing capabilities\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCLUTCH COVER:\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003ethe billet aluminum clutch cover now features larger \"windows\" to allow additional weight without having to modify the clutch cover\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eORIGINAL FEATURES:\u003cbr\u003e\u003c\/strong\u003eWhen it comes to the dark art of clutching, it takes more than a horsepower range to properly tune a clutch that meets your UTV's needs. With calibrations ranging from stock through all EVP Dynomite (DM) and Desert Storm (DS) turbo upgrades, EVP-Spec TAPP clutches are the most fine-tuned, responsive and dependable Polaris RZR primary clutches available. EVP TAPP Clutches are tuned to get the most out of your machine regardless of how or where you ride. Experience throttle response that pins your back to the seat, responsive power put down via excellent belt grip, and cooler clutch operating temps for enhanced belt and clutch life.\u003c\/p\u003e\n\u003cp\u003eEVP TAPP Primary Clutches for Polaris RZR models are calibrated to be used specifically with the EVP STM Tuner Secondary Clutch, or the OEM secondary clutch with EVP internals including Shift-Tek Helix and Spring.\u003c\/p\u003e\n\u003cp\u003eIf you don't have an EVP turbo package or you're running a stock RZR, you can still enjoy all the benefits and performance of an EVP TAPP primary clutch. TAPP clutches are renowned for being incredibly easy to tune. EVP techs will calibrate your clutch to a specific horsepower level and desired RPM engagement, leaving the final fine-tuning to you.\u003c\/p\u003e\n\u003cp\u003e\u003cmeta charset=\"utf-8\"\u003e\u003cspan\u003e\u003cstrong\u003eAll EVP TAPP primary clutch kits include full standard weight kit as well as tungsten TAPP Clutch Race Weights (set of 8).\u003c\/strong\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eDURABLE PERFORMANCE: \u003c\/strong\u003eDesigned with the durability that high-horsepower UTV's demand, TAPP clutches are built from billet aluminum and other high-tech materials that can withstand extreme heat and extend clutch life, so you can spend more time riding and less time in the shop. EVP has used TAPP clutches on our all-out drag race Can Am X3 and Polaris XPT vehicles with very high engagement launches without failure. The OEM primary clutch is reliable up to about 300 hp, but an EVP Spec TAPP primary can easily handle anything from 200-500+ hp and all terrain and riding styles - drag race, duning, trail riding, rock crawling, short course and desert racing - all with the unrivaled quality, durability and performance expected out of a TAPP Clutch.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eADJUSTABLE \u0026amp; VERSATILE: \u003c\/strong\u003eTAPP clutches are a game-changer when it comes to tuning and adjustability, allowing your clutch to easily evolve as your UTV's power level evolves. The two-sided ramps are swapped in minutes with just an Allen wrench. The clickers are adjusted externally, which can raise or lower the entire shift pattern easily. The roller arms allow mass to be added or removed by removing the clutch cover, and there are a variety of TAPP and EVP primary springs available for fine-tuning. Lastly, the TAPP clutch is also extremely forgiving, allowing a wide variety of helix angles to work with a given primary clutch calibration.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCOOLER TEMPS: \u003c\/strong\u003eTAPP primary clutches run cooler than any clutch on the market. High-tech materials, extensive venting for optimum airflow, and cooler belt temperatures thanks to the multi-angle curved sheaves all contribute to extending belt and overall clutch life‚Äîeven under the most demanding abuse.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eINSTANT THROTTLE RESPONSE: \u003c\/strong\u003eTAPP primary clutches are intended for customers that demand responsiveness and durability from their CVT drive system whether their UTV is relatively stock or all-out big turbo drag race trim. The centralized mass and lightweight, low-inertia design coupled with multi-angled curved sheaves and custom ramp angles deliver unbeatable belt grip, instantaneous throttle response and surefire power to the ground.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSMOOTH, QUIET OPERATION:\u003c\/strong\u003e The arms don't 'swing out' like a traditional flyweight but instead ride on a ramp system, which allows the clutch to be remarkably smooth and perform with minimal vibration. You will feel and hear the difference.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cmeta charset=\"utf-8\"\u003e\u003cspan\u003e\u003ci\u003eDisclaimer: All EVP Calibrated Tapp Clutch primaries may require minor calibration changes. If you need tuning support, please reference our instructions page or contact our technical department.\u003c\/i\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003eUnsure which clutch calibration is right for you? Give us a call! EVP Team members are available from 8:30am to 5:00pm CST and can help dial in the perfect clutch for your setup: (715) 247-3862\u003c\/p\u003e\n\u003cp\u003e\u003ci\u003e\u003cstrong\u003eNOTES FOR RZR'S WITH P90X CLUTCH (\u003c\/strong\u003e\u003c\/i\u003e\u003cspan\u003e\u003ci\u003e\u003cstrong\u003e2020-'22 Pro XP, 2021 (only) XP Turbo\/S, \u0026amp; 2022+ Turbo R\/Pro S): \u003c\/strong\u003e\u003c\/i\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cspan\u003e\u003ci\u003eTo remove the OEM P90X primary clutch, you must use the EVP \u003c\/i\u003e\u003c\/span\u003e\u003ca href=\"https:\/\/evopowersports.com\/products\/clutch-puller-for-polaris-rzr-turbo-r-pro-r-pro-xp-2021-xp-turbo-s-2018-ranger-1000\" target=\"_blank\"\u003e\u003cspan\u003e\u003ci\u003e\u003cstrong\u003eClutch Puller For Polaris RZR Turbo R\/Pro S, Pro XP and '21 XP Turbo\/S\u003c\/strong\u003e\u003c\/i\u003e\u003c\/span\u003e\u003c\/a\u003e\u003cspan\u003e\u003ci\u003e (P\/N 875FP0010). \u003c\/i\u003e\u003c\/span\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cspan\u003e\u003ci\u003eTo remove the TAPP primary clutch off of any cars listed above, you must use the \u003c\/i\u003e\u003c\/span\u003e\u003ca href=\"https:\/\/evopowersports.com\/products\/polaris-rzr-xp-turbo-rzr-900-1000-xp-1000-rs1-ranger-900-general-1000-clutch-puller\" target=\"_blank\"\u003e\u003cspan\u003e\u003ci\u003e\u003cstrong\u003eRZR XP Turbo\/S Clutch Puller Tool\u003c\/strong\u003e\u003c\/i\u003e\u003c\/span\u003e\u003c\/a\u003e\u003cspan\u003e\u003ci\u003e (P\/N 875FP0004).\u003c\/i\u003e\u003c\/span\u003e\n\u003c\/li\u003e\n\u003cli\u003e\u003ci\u003eTo provide proper clearance, you must install the EVP \u003cstrong\u003e\u003ca href=\"https:\/\/evopowersports.com\/products\/evp-clutch-cover-spacer-kit-for-polaris-rzr-turbo-r-2021-pro-xp\" rel=\"noopener\" target=\"_blank\"\u003eClutch Cover Spacer Kit for Polaris RZR Pro XP \u0026amp; Turbo R\/Pro S\u003c\/a\u003e \u003c\/strong\u003e\u003cmeta charset=\"utf-8\"\u003e\u003c\/i\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch1\u003eFITMENT\u003c\/h1\u003e\n\u003cp\u003e2020+ Polaris RZR Pro XP\u003cbr\u003e2022+ Polaris RZR Turbo R\/Pro S\u003c\/p\u003e\n\u003ch1\u003eCALIBRATION GUIDE\u003c\/h1\u003e\n\u003cp class=\"c16\" style=\"margin: 0in;\"\u003e\u003cspan class=\"c0\"\u003e\u003cspan style=\"font-family: 'Arial',sans-serif; color: black;\"\u003eThere are 4 main adjustable components in an EVP Spec TAPP Clutch, these are:\u003c\/span\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp class=\"c16\" style=\"margin: 0in;\"\u003e \u003c\/p\u003e\n\u003cp class=\"c22\" style=\"margin: 0in; text-align: justify;\"\u003e\u003cspan class=\"c5\"\u003e\u003cb\u003e\u003cspan style=\"font-family: 'Arial',sans-serif; color: black;\"\u003eRamp \u003c\/span\u003e\u003c\/b\u003e\u003c\/span\u003e\u003cspan class=\"c2\"\u003e\u003cb\u003e\u003cspan style=\"font-family: 'Arial',sans-serif; color: black;\"\u003eP\u003c\/span\u003e\u003c\/b\u003e\u003c\/span\u003e\u003cspan class=\"c5\"\u003e\u003cb\u003e\u003cspan style=\"font-family: 'Arial',sans-serif; color: black;\"\u003erofile\u003c\/span\u003e\u003c\/b\u003e\u003c\/span\u003e\u003cspan class=\"c5\"\u003e\u003cspan style=\"font-family: 'Arial',sans-serif; color: black;\"\u003e - \u003c\/span\u003e\u003c\/span\u003e\u003cspan class=\"c0\"\u003e\u003cspan style=\"font-family: 'Arial',sans-serif; color: black;\"\u003eYour TAPP clutch comes with a set of pre-chosen ramps that have been tested in many scenarios and have been deemed to be the most generic in most situations. Changing the angle or profile of the ramp will have many effects on the shift profile. This should only be done by an experienced tuner; you will likely not need to change this.\u003c\/span\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp class=\"c22\" style=\"margin: 0in; text-align: justify;\"\u003e \u003c\/p\u003e\n\u003cp class=\"c22\" style=\"margin: 0in; text-align: justify;\"\u003e\u003cspan class=\"c5\"\u003e\u003cb\u003e\u003cspan style=\"font-family: 'Arial',sans-serif; color: black;\"\u003eRamp \u003c\/span\u003e\u003c\/b\u003e\u003c\/span\u003e\u003cspan class=\"c2\"\u003e\u003cb\u003e\u003cspan style=\"font-family: 'Arial',sans-serif; color: black;\"\u003eA\u003c\/span\u003e\u003c\/b\u003e\u003c\/span\u003e\u003cspan class=\"c5\"\u003e\u003cb\u003e\u003cspan style=\"font-family: 'Arial',sans-serif; color: black;\"\u003engle\u003c\/span\u003e\u003c\/b\u003e\u003c\/span\u003e\u003cspan class=\"c5\"\u003e\u003cspan style=\"font-family: 'Arial',sans-serif; color: black;\"\u003e - \u003c\/span\u003e\u003c\/span\u003e\u003cspan style=\"font-family: 'Arial',sans-serif; color: black;\"\u003eThe ramp angle in your TAPP Clutch is adjustable from the outside via the use of the Quick Shift Bolts. As with other clicker style clutches, the higher the number, the higher the RPM. This will mainly affect the full shift speed but also affects the engagement and low speed slightly. \u003cspan class=\"c2\"\u003e\u003cb\u003eIMPORTANT\u003c\/b\u003e\u003c\/span\u003e \u003cspan class=\"c14\"\u003e\u003cb\u003e- Always adjust the ramp angle in pairs across from each other. If you do not, the clutch will be out of balance.\u003c\/b\u003e\u003c\/span\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp class=\"c22\" style=\"margin: 0in; text-align: justify;\"\u003e \u003c\/p\u003e\n\u003cp class=\"c19\" style=\"margin: 0in; text-align: justify;\"\u003e\u003cspan class=\"c5\"\u003e\u003cb\u003e\u003cspan style=\"font-family: 'Arial',sans-serif; color: black;\"\u003eRoller \u003c\/span\u003e\u003c\/b\u003e\u003c\/span\u003e\u003cspan class=\"c2\"\u003e\u003cb\u003e\u003cspan style=\"font-family: 'Arial',sans-serif; color: black;\"\u003eS\u003c\/span\u003e\u003c\/b\u003e\u003c\/span\u003e\u003cspan class=\"c5\"\u003e\u003cb\u003e\u003cspan style=\"font-family: 'Arial',sans-serif; color: black;\"\u003eize\u003c\/span\u003e\u003c\/b\u003e\u003c\/span\u003e\u003cspan class=\"c5\"\u003e\u003cspan style=\"font-family: 'Arial',sans-serif; color: black;\"\u003e - \u003c\/span\u003e\u003c\/span\u003e\u003cspan style=\"font-family: 'Arial',sans-serif; color: black;\"\u003eYour clutch was shipped with a predetermined roller size for your application. There are 3 sizes of rollers available: standard, 1mm oversize, and 2mm oversize. Bigger rollers make the low end \"quicker RPM's\" but shift out quicker and lower the full shift RPM. Smaller rollers make the engine slower shift and raise the full shift RPM. This has to do with the angle of the arms combined with the weight difference of the rollers. \u003cspan class=\"c2\"\u003e\u003cb\u003eIMPORTANT\u003c\/b\u003e\u003c\/span\u003e \u003cspan class=\"c2\"\u003e\u003cb\u003e- As with the ramp angle, roller size must be done in pairs across from each other. Failure to do so will result in an imbalance of the clutch and possibly failure.\u003c\/b\u003e\u003c\/span\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp class=\"c19\" style=\"margin: 0in; text-align: justify;\"\u003e \u003c\/p\u003e\n\u003cp class=\"c22\" style=\"margin: 0in; text-align: justify;\"\u003e\u003cspan class=\"c5\"\u003e\u003cb\u003e\u003cspan style=\"font-family: 'Arial',sans-serif; color: black;\"\u003eWeight \u003c\/span\u003e\u003c\/b\u003e\u003c\/span\u003e\u003cspan class=\"c2\"\u003e\u003cb\u003e\u003cspan style=\"font-family: 'Arial',sans-serif; color: black;\"\u003eA\u003c\/span\u003e\u003c\/b\u003e\u003c\/span\u003e\u003cspan class=\"c5\"\u003e\u003cb\u003e\u003cspan style=\"font-family: 'Arial',sans-serif; color: black;\"\u003edjustment\u003c\/span\u003e\u003c\/b\u003e\u003c\/span\u003e\u003cspan style=\"font-family: 'Arial',sans-serif; color: black;\"\u003e - The weight in the arms can be adjusted in two ways: set screws in the arms, and washers on the roller thru bolt. As with all other clutches, add weight to lower RPM, remove weight to raise RPM. Set screws in the arms affect the low-speed shift points more than the high speed and will reduce the max RPM, and weight on the roller bolt acts like tip weight in a conventional clutch affecting the high speed more than any other part of the curve. Adjust this as needed for your application. \u003cspan class=\"c14\"\u003e\u003cb\u003eIMPORTANT - As with all other adjustments, do this evenly and only in pairs across from each other, failure to do so will result in an imbalance of the clutch and possible failure.\u003c\/b\u003e\u003c\/span\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003ch1\u003eINSTRUCTIONS\u003c\/h1\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0054\/6786\/5134\/files\/TAPP_x_Evolution_Clutching_Instructions_bc3b4332-4612-424a-955a-4c130568cca2.pdf?v=1686159652\" target=\"_blank\"\u003ePolaris RZR Pro XP\/Turbo\/S Tapp Primary Clutch Kit by EVP.MOde\u003c\/a\u003e\u003c\/p\u003e","brand":"TAPP","offers":[{"title":"Stage 2-91 or Stage 3-96 \/ 2800 RPM","offer_id":40592048947246,"sku":"2282020007","price":2700.0,"currency_code":"USD","in_stock":true},{"title":"Stage 2-91 or Stage 3-96 \/ 3000 RPM","offer_id":40592049045550,"sku":"2282020008","price":2700.0,"currency_code":"USD","in_stock":true},{"title":"Stage 2-91 or Stage 3-96 \/ 3500 RPM","offer_id":40592049143854,"sku":"2282020009","price":2700.0,"currency_code":"USD","in_stock":true},{"title":"Stage 4RWi-X100 or Stage 5RWi-X85 \/ 2800 RPM","offer_id":40592049242158,"sku":"2282020010","price":2700.0,"currency_code":"USD","in_stock":true},{"title":"Stage 4RWi-X100 or Stage 5RWi-X85 \/ 3000 RPM","offer_id":40592049340462,"sku":"2282020011","price":2700.0,"currency_code":"USD","in_stock":true},{"title":"Stage 4RWi-X100 or Stage 5RWi-X85 \/ 3500 RPM","offer_id":40592049963054,"sku":"2282020012","price":2700.0,"currency_code":"USD","in_stock":true},{"title":"P43-270\/280 91 Octane \/ 3000 RPM","offer_id":40592049995822,"sku":"2282020013","price":2700.0,"currency_code":"USD","in_stock":true},{"title":"P43-270\/280 100 Octane \/ 3000 RPM","offer_id":40592050028590,"sku":"2282020014","price":2700.0,"currency_code":"USD","in_stock":true},{"title":"P43-270\/280 110 \u0026 E85 \/ 3000 RPM","offer_id":40592050061358,"sku":"2282020015","price":2700.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0054\/6786\/5134\/files\/tapp_clutch_1_1a7b2fa6-fd1b-456f-a0f3-09fef63e0340.jpg?v=1708458142"},{"product_id":"evp-x-tapp-primary-clutch-for-can-am-maverick-x3-with-evp-ecu-power-flash","title":"EVP TAPP Roller Primary Clutch for 2021+ Can-Am Maverick X3 Turbo RR with EVP ECU Power Flash","description":"\u003ch1 data-mce-fragment=\"1\"\u003eDESCRIPTION\u003c\/h1\u003e\n\u003cp\u003e\u003cspan data-mce-fragment=\"1\"\u003e\u003cstrong\u003eNEW EVP TAPP CLUTCH UPDATES (2024):\u003c\/strong\u003e \u003cbr\u003e\u003c\/span\u003e\u003cspan data-mce-fragment=\"1\"\u003eDon't think a TAPP clutch can be any smoother and more responsive than it already is? Think again. The all-new Roller Spider design for TAPP Primary Clutches replaces the original button spider assembly for instant power delivery due to the reduction in friction between the spider and movable sheave. This results in even better belt grip than before, lower belt temps, better belt life, and buttery smooth engagement that's guaranteed to keep your car dialed in any riding condition.\u003c\/span\u003e The patent-pending TAPP Roller Primary Clutch is the next revolution in clutching technology.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eUPDATED FEATURES:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eROLLER SPIDER DESIGN:\u003c\/strong\u003e creates less friction in the movable sheave compared to button spiders for a much more responsive setup\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCENTER BEARING: \u003c\/strong\u003eNEW black nitrate coating (black finish) adds an extra layer of hardness, prevents rust corrosion, and reduces friction for even smoother clutch operation\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLARGER ROLLER:\u003c\/strong\u003e roller size has been increased from 2mm to 3mm, making a huge difference in longevity of the clutch bearing particularly under high horsepower and harsh conditions\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePOST: \u003c\/strong\u003eupdated with additional material and new heat-treating process, allowing the clutch to be over-torqued from factory specs by preventing the clutch from slipping on the shaft (necessary for high-horsepower builds and\/or drag racing setups)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMOVEABLE SHEAVE: \u003c\/strong\u003eadded material with the new roller spider design, reinforcing the clutch towers for greater load-bearing capabilities\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCLUTCH COVER:\u003c\/strong\u003e the billet aluminum clutch cover now features larger \"windows\" to allow additional weight without having to modify the clutch cover \u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eORIGINAL FEATURES:\u003c\/strong\u003e\u003cbr\u003eWhen it comes to the dark art of clutching, it takes more than a horsepower range to properly tune a clutch that meets your UTV's needs. With calibrations ranging from stock through all EVP Paragon, Dynomite (DM) and Desert Storm (DS) turbo upgrades, EVP-spec TAPP clutches are the most fine-tuned, responsive and dependable X3 primary clutches available. EVP-spec TAPP Clutches are tuned to get the most out of your machine regardless of how or where you ride. Experience throttle response that pins your back to the seat, responsive power put down via excellent belt grip, and cooler clutch operating temps for enhanced belt and clutch life.\u003cbr\u003e\u003cbr\u003eEVP-spec TAPP Primary Clutches for X3 models are calibrated specifically for use with the OEM secondary clutch with EVP internals including Shift-Tek Helix and Spring.\u003cbr\u003e\u003cbr\u003eIf you don't have an EVP turbo package or you're running a stock X3, you can still enjoy all the benefits and performance of an EVP-spec TAPP primary clutch. TAPP clutches are renowned for being incredibly easy to tune. EVP techs will calibrate your clutch to a specific horsepower level and desired RPM engagement, leaving the final fine-tuning to you.\u003c\/p\u003e\n\u003cp\u003e\u003cmeta charset=\"utf-8\"\u003e\u003cspan data-mce-fragment=\"1\"\u003eAll EVP TAPP primary clutch kits include full standard weight kit as well as tungsten race weights (set of 8).\u003c\/span\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eDURABLE PERFORMANCE:\u003c\/strong\u003e Designed with the durability that high-horsepower UTV's demand, TAPP clutches are built from billet aluminum and other high-tech materials that can withstand extreme heat and extend clutch life, so you can spend more time riding and less time in the shop. EVP has used TAPP clutches on our all-out drag race Can Am X3 and Polaris XPT vehicles with very high engagement launches without failure. The OEM primary clutch is reliable up to about 300 hp, but an EVP TAPP primary can easily handle anything from 200-500+ hp and all terrain and riding styles - drag race, duning, trail riding, rock crawling, short course and desert racing - all with the unrivaled quality, durability and performance expected out of a TAPP Clutch.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eADJUSTABLE \u0026amp; VERSATILE: \u003c\/strong\u003eTAPP clutches are a game-changer when it comes to tuning and adjustability, allowing your clutch to easily evolve as your UTV's power level evolves. The two-sided ramps are swapped in minutes with just an Allen wrench. The clickers are adjusted externally, which can raise or lower the entire shift pattern easily. The roller arms allow mass to be added or removed by removing the clutch cover, and there are a variety of TAPP and EVP primary springs available for fine-tuning. Lastly, the TAPP clutch is also extremely forgiving, allowing a wide variety of helix angles to work with a given primary clutch calibration.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCOOLER TEMPS:\u003c\/strong\u003e TAPP primary clutches run cooler than any clutch on the market. High-tech materials, extensive venting for optimum airflow, and cooler belt temperatures thanks to the multi-angle curved sheaves all contribute to extending belt and overall clutch life‚Äîeven under the most demanding abuse.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eINSTANT THROTTLE RESPONSE: \u003c\/strong\u003eTAPP primary clutches are intended for customers that demand responsiveness and durability from their CVT drive system whether their UTV is relatively stock or all-out big turbo drag race trim. The centralized mass and lightweight, low-inertia design coupled with multi-angled curved sheaves and custom ramp angles deliver unbeatable belt grip, instantaneous throttle response and surefire power to the ground.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSMOOTH, QUIET OPERATION: \u003c\/strong\u003eThe arms don't 'swing out' like a traditional flyweight but instead ride on a ramp system, which allows the clutch to be remarkably smooth and perform with minimal vibration. You will feel and hear the difference.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003ci\u003e\u003cstrong\u003eDisclaimer:\u003c\/strong\u003e \u003cmeta charset=\"utf-8\"\u003eEVP only\u003cspan data-mce-fragment=\"1\"\u003e \u003c\/span\u003eoffers Tech Support for EVP-Spec TAPP clutches purchased directly from EVP. All EVP Calibrated Tapp Clutch primaries may require minor calibration changes. If you need tuning support, please reference our instructions page or contact our technical department. \u003c\/i\u003e\u003cbr\u003e\u003cbr\u003eUnsure which clutch calibration is right for you? Give us a call! EVP Team members are available from 8:30am to 5:00pm CST and can help dial in the perfect clutch for your setup: (715) 247-3862\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003ch1\u003eCALIBRATION GUIDE\u003c\/h1\u003e\n\u003cp class=\"c16\" style=\"margin: 0in;\" data-mce-style=\"margin: 0in;\"\u003e\u003cspan class=\"c0\"\u003e\u003cspan style=\"font-family: 'Arial',sans-serif; color: black;\" data-mce-style=\"font-family: 'Arial',sans-serif; color: black;\"\u003eThere are 4 main adjustable components in an EVP Spec TAPP Clutch, these are:\u003c\/span\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp class=\"c16\" style=\"margin: 0in;\" data-mce-style=\"margin: 0in;\"\u003e \u003c\/p\u003e\n\u003cp class=\"c22\" style=\"margin: 0in; text-align: justify;\" data-mce-style=\"margin: 0in; text-align: justify;\"\u003e\u003cspan class=\"c5\"\u003e\u003cb\u003e\u003cspan style=\"font-family: 'Arial',sans-serif; color: black;\" data-mce-style=\"font-family: 'Arial',sans-serif; color: black;\"\u003eRamp \u003c\/span\u003e\u003c\/b\u003e\u003c\/span\u003e\u003cspan class=\"c2\"\u003e\u003cb\u003e\u003cspan style=\"font-family: 'Arial',sans-serif; color: black;\" data-mce-style=\"font-family: 'Arial',sans-serif; color: black;\"\u003eP\u003c\/span\u003e\u003c\/b\u003e\u003c\/span\u003e\u003cspan class=\"c5\"\u003e\u003cb\u003e\u003cspan style=\"font-family: 'Arial',sans-serif; color: black;\" data-mce-style=\"font-family: 'Arial',sans-serif; color: black;\"\u003erofile\u003c\/span\u003e\u003c\/b\u003e\u003c\/span\u003e\u003cspan class=\"c5\"\u003e\u003cspan style=\"font-family: 'Arial',sans-serif; color: black;\" data-mce-style=\"font-family: 'Arial',sans-serif; color: black;\"\u003e - \u003c\/span\u003e\u003c\/span\u003e\u003cspan class=\"c0\"\u003e\u003cspan style=\"font-family: 'Arial',sans-serif; color: black;\" data-mce-style=\"font-family: 'Arial',sans-serif; color: black;\"\u003eYour TAPP clutch comes with a set of pre-chosen ramps that have been tested in many scenarios and have been deemed to be the most generic in most situations. Changing the angle or profile of the ramp will have many effects on the shift profile. This should only be done by an experienced tuner; you will likely not need to change this.\u003c\/span\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp class=\"c22\" style=\"margin: 0in; text-align: justify;\" data-mce-style=\"margin: 0in; text-align: justify;\"\u003e \u003c\/p\u003e\n\u003cp class=\"c22\" style=\"margin: 0in; text-align: justify;\" data-mce-style=\"margin: 0in; text-align: justify;\"\u003e\u003cspan class=\"c5\"\u003e\u003cb\u003e\u003cspan style=\"font-family: 'Arial',sans-serif; color: black;\" data-mce-style=\"font-family: 'Arial',sans-serif; color: black;\"\u003eRamp \u003c\/span\u003e\u003c\/b\u003e\u003c\/span\u003e\u003cspan class=\"c2\"\u003e\u003cb\u003e\u003cspan style=\"font-family: 'Arial',sans-serif; color: black;\" data-mce-style=\"font-family: 'Arial',sans-serif; color: black;\"\u003eA\u003c\/span\u003e\u003c\/b\u003e\u003c\/span\u003e\u003cspan class=\"c5\"\u003e\u003cb\u003e\u003cspan style=\"font-family: 'Arial',sans-serif; color: black;\" data-mce-style=\"font-family: 'Arial',sans-serif; color: black;\"\u003engle\u003c\/span\u003e\u003c\/b\u003e\u003c\/span\u003e\u003cspan class=\"c5\"\u003e\u003cspan style=\"font-family: 'Arial',sans-serif; color: black;\" data-mce-style=\"font-family: 'Arial',sans-serif; color: black;\"\u003e - \u003c\/span\u003e\u003c\/span\u003e\u003cspan style=\"font-family: 'Arial',sans-serif; color: black;\" data-mce-style=\"font-family: 'Arial',sans-serif; color: black;\"\u003eThe ramp angle in your TAPP Clutch is adjustable from the outside via the use of the Quick Shift Bolts. As with other clicker style clutches, the higher the number, the higher the RPM. This will mainly affect the full shift speed but also affects the engagement and low speed slightly. \u003cspan class=\"c2\"\u003e\u003cb\u003eIMPORTANT\u003c\/b\u003e\u003c\/span\u003e \u003cspan class=\"c14\"\u003e\u003cb\u003e- Always adjust the ramp angle in pairs across from each other. If you do not, the clutch will be out of balance.\u003c\/b\u003e\u003c\/span\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp class=\"c22\" style=\"margin: 0in; text-align: justify;\" data-mce-style=\"margin: 0in; text-align: justify;\"\u003e \u003c\/p\u003e\n\u003cp class=\"c19\" style=\"margin: 0in; text-align: justify;\" data-mce-style=\"margin: 0in; text-align: justify;\"\u003e\u003cspan class=\"c5\"\u003e\u003cb\u003e\u003cspan style=\"font-family: 'Arial',sans-serif; color: black;\" data-mce-style=\"font-family: 'Arial',sans-serif; color: black;\"\u003eRoller \u003c\/span\u003e\u003c\/b\u003e\u003c\/span\u003e\u003cspan class=\"c2\"\u003e\u003cb\u003e\u003cspan style=\"font-family: 'Arial',sans-serif; color: black;\" data-mce-style=\"font-family: 'Arial',sans-serif; color: black;\"\u003eS\u003c\/span\u003e\u003c\/b\u003e\u003c\/span\u003e\u003cspan class=\"c5\"\u003e\u003cb\u003e\u003cspan style=\"font-family: 'Arial',sans-serif; color: black;\" data-mce-style=\"font-family: 'Arial',sans-serif; color: black;\"\u003eize\u003c\/span\u003e\u003c\/b\u003e\u003c\/span\u003e\u003cspan class=\"c5\"\u003e\u003cspan style=\"font-family: 'Arial',sans-serif; color: black;\" data-mce-style=\"font-family: 'Arial',sans-serif; color: black;\"\u003e - \u003c\/span\u003e\u003c\/span\u003e\u003cspan style=\"font-family: 'Arial',sans-serif; color: black;\" data-mce-style=\"font-family: 'Arial',sans-serif; color: black;\"\u003eYour clutch was shipped with a predetermined roller size for your application. There are 3 sizes of rollers available: standard, 1mm oversize, and 2mm oversize. Bigger rollers make the low end \"quicker RPM's\" but shift out quicker and lower the full shift RPM. Smaller rollers make the engine slower shift and raise the full shift RPM. This has to do with the angle of the arms combined with the weight difference of the rollers. \u003cspan class=\"c2\"\u003e\u003cb\u003eIMPORTANT\u003c\/b\u003e\u003c\/span\u003e \u003cspan class=\"c2\"\u003e\u003cb\u003e- As with the ramp angle, roller size must be done in pairs across from each other. Failure to do so will result in an imbalance of the clutch and possibly failure.\u003c\/b\u003e\u003c\/span\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp class=\"c19\" style=\"margin: 0in; text-align: justify;\" data-mce-style=\"margin: 0in; text-align: justify;\"\u003e \u003c\/p\u003e\n\u003cp class=\"c22\" style=\"margin: 0in; text-align: justify;\" data-mce-style=\"margin: 0in; text-align: justify;\"\u003e\u003cspan class=\"c5\"\u003e\u003cb\u003e\u003cspan style=\"font-family: 'Arial',sans-serif; color: black;\" data-mce-style=\"font-family: 'Arial',sans-serif; color: black;\"\u003eWeight \u003c\/span\u003e\u003c\/b\u003e\u003c\/span\u003e\u003cspan class=\"c2\"\u003e\u003cb\u003e\u003cspan style=\"font-family: 'Arial',sans-serif; color: black;\" data-mce-style=\"font-family: 'Arial',sans-serif; color: black;\"\u003eA\u003c\/span\u003e\u003c\/b\u003e\u003c\/span\u003e\u003cspan class=\"c5\"\u003e\u003cb\u003e\u003cspan style=\"font-family: 'Arial',sans-serif; color: black;\" data-mce-style=\"font-family: 'Arial',sans-serif; color: black;\"\u003edjustment\u003c\/span\u003e\u003c\/b\u003e\u003c\/span\u003e\u003cspan style=\"font-family: 'Arial',sans-serif; color: black;\" data-mce-style=\"font-family: 'Arial',sans-serif; color: black;\"\u003e - The weight in the arms can be adjusted in two ways: set screws in the arms, and washers on the roller thru bolt. As with all other clutches, add weight to lower RPM, remove weight to raise RPM. Set screws in the arms affect the low-speed shift points more than the high speed and will reduce the max RPM, and weight on the roller bolt acts like tip weight in a conventional clutch affecting the high speed more than any other part of the curve. Adjust this as needed for your application. \u003cspan class=\"c14\"\u003e\u003cb\u003eIMPORTANT - As with all other adjustments, do this evenly and only in pairs across from each other, failure to do so will result in an imbalance of the clutch and possible failure.\u003c\/b\u003e\u003c\/span\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003e \u003c\/p\u003e\n\u003ch1 data-mce-fragment=\"1\"\u003eINSTRUCTIONS\u003c\/h1\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0054\/6786\/5134\/files\/TAPP_x_Evolution_Clutching_Instructions_0f640e4e-8e3b-43b4-a6fb-a8d783096f1d.pdf?v=1687540083\" target=\"_blank\"\u003eCan Am Maverick X3 Tapp Primary Clutch Kit by EVP.MOde\u003c\/a\u003e\u003c\/p\u003e","brand":"TAPP","offers":[{"title":"Stage 3R-91 (2200 RPM)","offer_id":40593032282158,"sku":"2282010006","price":2700.0,"currency_code":"USD","in_stock":true},{"title":"Stage 3R-91 (2300 RPM)","offer_id":40593032314926,"sku":"2282010002","price":2700.0,"currency_code":"USD","in_stock":true},{"title":"Stage 3R-91 (2500 RPM)","offer_id":40593032347694,"sku":"2282010003","price":2700.0,"currency_code":"USD","in_stock":true},{"title":"Stage 3R-91 (3000 RPM)","offer_id":40593032380462,"sku":"2282010007","price":2700.0,"currency_code":"USD","in_stock":true},{"title":"Stage 3R-91 (3200 RPM)","offer_id":40593033953326,"sku":"2282010004","price":2700.0,"currency_code":"USD","in_stock":true},{"title":"Stage 3R-91 (3800 RPM)","offer_id":40593032413230,"sku":"2282010005","price":2700.0,"currency_code":"USD","in_stock":true},{"title":"Stage 3R-91 (4000 RPM)","offer_id":40593032445998,"sku":"2282010008","price":2700.0,"currency_code":"USD","in_stock":true},{"title":"Stage 3R-93\/95 (1800 RPM)","offer_id":40593032478766,"sku":"2282010009","price":2700.0,"currency_code":"USD","in_stock":true},{"title":"Stage 3R-93\/95 (2000 RPM)","offer_id":40593032511534,"sku":"2282010012","price":2700.0,"currency_code":"USD","in_stock":true},{"title":"Stage 3R-93\/95 (2200 RPM)","offer_id":40593032544302,"sku":"2282010010","price":2700.0,"currency_code":"USD","in_stock":true},{"title":"Stage 3R-93\/95 (2300 RPM)","offer_id":40593032577070,"sku":"2282010011","price":2700.0,"currency_code":"USD","in_stock":true},{"title":"Stage X100\/X85 (1800 RPM)","offer_id":40593032609838,"sku":"2282010013","price":2700.0,"currency_code":"USD","in_stock":true},{"title":"Stage X100\/X85 (2000 RPM)","offer_id":40593032642606,"sku":"2282010014","price":2700.0,"currency_code":"USD","in_stock":true},{"title":"Stage X100\/X85 (2200 RPM)","offer_id":40593032675374,"sku":"2282010015","price":2700.0,"currency_code":"USD","in_stock":true},{"title":"Stage X100\/X85 (2300 RPM)","offer_id":40593032708142,"sku":"2282010016","price":2700.0,"currency_code":"USD","in_stock":true},{"title":"Stage X100\/X85 (3000 RPM)","offer_id":40593032740910,"sku":"2282010017","price":2700.0,"currency_code":"USD","in_stock":true},{"title":"Stage X100\/X85 (3200 RPM)","offer_id":40593032773678,"sku":"2282010019","price":2700.0,"currency_code":"USD","in_stock":true},{"title":"Stage X100\/X85 (4000 RPM)","offer_id":40593032806446,"sku":"2282010018","price":2700.0,"currency_code":"USD","in_stock":true},{"title":"Stage X100\/X85 (4200 RPM)","offer_id":40593032839214,"sku":"2282010020","price":2700.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0054\/6786\/5134\/files\/tapp_clutch_1.jpg?v=1708458018"},{"product_id":"evp-tapp-roller-primary-clutch-for-2020-can-am-maverick-x3-turbo-rr-with-evp-ecu-power-flash","title":"EVP TAPP Roller Primary Clutch for 2020 Can-Am Maverick X3 Turbo RR with EVP ECU Power Flash","description":"\u003ch1 data-mce-fragment=\"1\"\u003eDESCRIPTION\u003c\/h1\u003e\n\u003cp\u003e\u003cspan data-mce-fragment=\"1\"\u003e\u003cstrong\u003eNEW EVP TAPP CLUTCH UPDATES (2024):\u003c\/strong\u003e \u003cbr\u003e\u003c\/span\u003e\u003cspan data-mce-fragment=\"1\"\u003eDon't think a TAPP clutch can be any smoother and more responsive than it already is? Think again. The all-new Roller Spider design for TAPP Primary Clutches replaces the original button spider assembly for instant power delivery due to the reduction in friction between the spider and movable sheave. This results in even better belt grip than before, lower belt temps, better belt life, and buttery smooth engagement that's guaranteed to keep your car dialed in any riding condition.\u003c\/span\u003e The patent-pending TAPP Roller Primary Clutch is the next revolution in clutching technology.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eUPDATED FEATURES:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eROLLER SPIDER DESIGN:\u003c\/strong\u003e creates less friction in the movable sheave compared to button spiders for a much more responsive setup\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCENTER BEARING: \u003c\/strong\u003eNEW black nitrate coating (black finish) adds an extra layer of hardness, prevents rust corrosion, and reduces friction for even smoother clutch operation\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLARGER ROLLER:\u003c\/strong\u003e roller size has been increased from 2mm to 3mm, making a huge difference in longevity of the clutch bearing particularly under high horsepower and harsh conditions\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePOST: \u003c\/strong\u003eupdated with additional material and new heat-treating process, allowing the clutch to be over-torqued from factory specs by preventing the clutch from slipping on the shaft (necessary for high-horsepower builds and\/or drag racing setups)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMOVEABLE SHEAVE: \u003c\/strong\u003eadded material with the new roller spider design, reinforcing the clutch towers for greater load-bearing capabilities\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCLUTCH COVER:\u003c\/strong\u003e the billet aluminum clutch cover now features larger \"windows\" to allow additional weight without having to modify the clutch cover \u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eORIGINAL FEATURES:\u003c\/strong\u003e\u003cbr\u003eWhen it comes to the dark art of clutching, it takes more than a horsepower range to properly tune a clutch that meets your UTV's needs. With calibrations ranging from stock through all EVP Paragon, Dynomite (DM) and Desert Storm (DS) turbo upgrades, EVP-spec TAPP clutches are the most fine-tuned, responsive and dependable X3 primary clutches available. EVP-spec TAPP Clutches are tuned to get the most out of your machine regardless of how or where you ride. Experience throttle response that pins your back to the seat, responsive power put down via excellent belt grip, and cooler clutch operating temps for enhanced belt and clutch life.\u003cbr\u003e\u003cbr\u003eEVP-spec TAPP Primary Clutches for X3 models are calibrated specifically for use with the OEM secondary clutch with EVP internals including Shift-Tek Helix and Spring.\u003cbr\u003e\u003cbr\u003eIf you don't have an EVP turbo package or you're running a stock X3, you can still enjoy all the benefits and performance of an EVP-spec TAPP primary clutch. TAPP clutches are renowned for being incredibly easy to tune. EVP techs will calibrate your clutch to a specific horsepower level and desired RPM engagement, leaving the final fine-tuning to you.\u003c\/p\u003e\n\u003cp\u003e\u003cmeta charset=\"utf-8\"\u003e\u003cspan data-mce-fragment=\"1\"\u003eAll EVP TAPP primary clutch kits include full standard weight kit as well as tungsten race weights (set of 8).\u003c\/span\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eDURABLE PERFORMANCE:\u003c\/strong\u003e Designed with the durability that high-horsepower UTV's demand, TAPP clutches are built from billet aluminum and other high-tech materials that can withstand extreme heat and extend clutch life, so you can spend more time riding and less time in the shop. EVP has used TAPP clutches on our all-out drag race Can Am X3 and Polaris XPT vehicles with very high engagement launches without failure. The OEM primary clutch is reliable up to about 300 hp, but an EVP TAPP primary can easily handle anything from 200-500+ hp and all terrain and riding styles - drag race, duning, trail riding, rock crawling, short course and desert racing - all with the unrivaled quality, durability and performance expected out of a TAPP Clutch.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eADJUSTABLE \u0026amp; VERSATILE: \u003c\/strong\u003eTAPP clutches are a game-changer when it comes to tuning and adjustability, allowing your clutch to easily evolve as your UTV's power level evolves. The two-sided ramps are swapped in minutes with just an Allen wrench. The clickers are adjusted externally, which can raise or lower the entire shift pattern easily. The roller arms allow mass to be added or removed by removing the clutch cover, and there are a variety of TAPP and EVP primary springs available for fine-tuning. Lastly, the TAPP clutch is also extremely forgiving, allowing a wide variety of helix angles to work with a given primary clutch calibration.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCOOLER TEMPS:\u003c\/strong\u003e TAPP primary clutches run cooler than any clutch on the market. High-tech materials, extensive venting for optimum airflow, and cooler belt temperatures thanks to the multi-angle curved sheaves all contribute to extending belt and overall clutch life‚Äîeven under the most demanding abuse.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eINSTANT THROTTLE RESPONSE: \u003c\/strong\u003eTAPP primary clutches are intended for customers that demand responsiveness and durability from their CVT drive system whether their UTV is relatively stock or all-out big turbo drag race trim. The centralized mass and lightweight, low-inertia design coupled with multi-angled curved sheaves and custom ramp angles deliver unbeatable belt grip, instantaneous throttle response and surefire power to the ground.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSMOOTH, QUIET OPERATION: \u003c\/strong\u003eThe arms don't 'swing out' like a traditional flyweight but instead ride on a ramp system, which allows the clutch to be remarkably smooth and perform with minimal vibration. You will feel and hear the difference.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003ci\u003e\u003cstrong\u003eDisclaimer:\u003c\/strong\u003e \u003cmeta charset=\"utf-8\"\u003eEVP only\u003cspan data-mce-fragment=\"1\"\u003e \u003c\/span\u003eoffers Tech Support for EVP-Spec TAPP clutches purchased directly from EVP. All EVP Calibrated Tapp Clutch primaries may require minor calibration changes. If you need tuning support, please reference our instructions page or contact our technical department. \u003c\/i\u003e\u003cbr\u003e\u003cbr\u003eUnsure which clutch calibration is right for you? Give us a call! EVP Team members are available from 8:30am to 5:00pm CST and can help dial in the perfect clutch for your setup: (715) 247-3862\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003ch1\u003eCALIBRATION GUIDE\u003c\/h1\u003e\n\u003cp class=\"c16\" style=\"margin: 0in;\" data-mce-style=\"margin: 0in;\"\u003e\u003cspan class=\"c0\"\u003e\u003cspan style=\"font-family: 'Arial',sans-serif; color: black;\" data-mce-style=\"font-family: 'Arial',sans-serif; color: black;\"\u003eThere are 4 main adjustable components in an EVP Spec TAPP Clutch, these are:\u003c\/span\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp class=\"c16\" style=\"margin: 0in;\" data-mce-style=\"margin: 0in;\"\u003e \u003c\/p\u003e\n\u003cp class=\"c22\" style=\"margin: 0in; text-align: justify;\" data-mce-style=\"margin: 0in; text-align: justify;\"\u003e\u003cspan class=\"c5\"\u003e\u003cb\u003e\u003cspan style=\"font-family: 'Arial',sans-serif; color: black;\" data-mce-style=\"font-family: 'Arial',sans-serif; color: black;\"\u003eRamp \u003c\/span\u003e\u003c\/b\u003e\u003c\/span\u003e\u003cspan class=\"c2\"\u003e\u003cb\u003e\u003cspan style=\"font-family: 'Arial',sans-serif; color: black;\" data-mce-style=\"font-family: 'Arial',sans-serif; color: black;\"\u003eP\u003c\/span\u003e\u003c\/b\u003e\u003c\/span\u003e\u003cspan class=\"c5\"\u003e\u003cb\u003e\u003cspan style=\"font-family: 'Arial',sans-serif; color: black;\" data-mce-style=\"font-family: 'Arial',sans-serif; color: black;\"\u003erofile\u003c\/span\u003e\u003c\/b\u003e\u003c\/span\u003e\u003cspan class=\"c5\"\u003e\u003cspan style=\"font-family: 'Arial',sans-serif; color: black;\" data-mce-style=\"font-family: 'Arial',sans-serif; color: black;\"\u003e - \u003c\/span\u003e\u003c\/span\u003e\u003cspan class=\"c0\"\u003e\u003cspan style=\"font-family: 'Arial',sans-serif; color: black;\" data-mce-style=\"font-family: 'Arial',sans-serif; color: black;\"\u003eYour TAPP clutch comes with a set of pre-chosen ramps that have been tested in many scenarios and have been deemed to be the most generic in most situations. Changing the angle or profile of the ramp will have many effects on the shift profile. This should only be done by an experienced tuner; you will likely not need to change this.\u003c\/span\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp class=\"c22\" style=\"margin: 0in; text-align: justify;\" data-mce-style=\"margin: 0in; text-align: justify;\"\u003e \u003c\/p\u003e\n\u003cp class=\"c22\" style=\"margin: 0in; text-align: justify;\" data-mce-style=\"margin: 0in; text-align: justify;\"\u003e\u003cspan class=\"c5\"\u003e\u003cb\u003e\u003cspan style=\"font-family: 'Arial',sans-serif; color: black;\" data-mce-style=\"font-family: 'Arial',sans-serif; color: black;\"\u003eRamp \u003c\/span\u003e\u003c\/b\u003e\u003c\/span\u003e\u003cspan class=\"c2\"\u003e\u003cb\u003e\u003cspan style=\"font-family: 'Arial',sans-serif; color: black;\" data-mce-style=\"font-family: 'Arial',sans-serif; color: black;\"\u003eA\u003c\/span\u003e\u003c\/b\u003e\u003c\/span\u003e\u003cspan class=\"c5\"\u003e\u003cb\u003e\u003cspan style=\"font-family: 'Arial',sans-serif; color: black;\" data-mce-style=\"font-family: 'Arial',sans-serif; color: black;\"\u003engle\u003c\/span\u003e\u003c\/b\u003e\u003c\/span\u003e\u003cspan class=\"c5\"\u003e\u003cspan style=\"font-family: 'Arial',sans-serif; color: black;\" data-mce-style=\"font-family: 'Arial',sans-serif; color: black;\"\u003e - \u003c\/span\u003e\u003c\/span\u003e\u003cspan style=\"font-family: 'Arial',sans-serif; color: black;\" data-mce-style=\"font-family: 'Arial',sans-serif; color: black;\"\u003eThe ramp angle in your TAPP Clutch is adjustable from the outside via the use of the Quick Shift Bolts. As with other clicker style clutches, the higher the number, the higher the RPM. This will mainly affect the full shift speed but also affects the engagement and low speed slightly. \u003cspan class=\"c2\"\u003e\u003cb\u003eIMPORTANT\u003c\/b\u003e\u003c\/span\u003e \u003cspan class=\"c14\"\u003e\u003cb\u003e- Always adjust the ramp angle in pairs across from each other. If you do not, the clutch will be out of balance.\u003c\/b\u003e\u003c\/span\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp class=\"c22\" style=\"margin: 0in; text-align: justify;\" data-mce-style=\"margin: 0in; text-align: justify;\"\u003e \u003c\/p\u003e\n\u003cp class=\"c19\" style=\"margin: 0in; text-align: justify;\" data-mce-style=\"margin: 0in; text-align: justify;\"\u003e\u003cspan class=\"c5\"\u003e\u003cb\u003e\u003cspan style=\"font-family: 'Arial',sans-serif; color: black;\" data-mce-style=\"font-family: 'Arial',sans-serif; color: black;\"\u003eRoller \u003c\/span\u003e\u003c\/b\u003e\u003c\/span\u003e\u003cspan class=\"c2\"\u003e\u003cb\u003e\u003cspan style=\"font-family: 'Arial',sans-serif; color: black;\" data-mce-style=\"font-family: 'Arial',sans-serif; color: black;\"\u003eS\u003c\/span\u003e\u003c\/b\u003e\u003c\/span\u003e\u003cspan class=\"c5\"\u003e\u003cb\u003e\u003cspan style=\"font-family: 'Arial',sans-serif; color: black;\" data-mce-style=\"font-family: 'Arial',sans-serif; color: black;\"\u003eize\u003c\/span\u003e\u003c\/b\u003e\u003c\/span\u003e\u003cspan class=\"c5\"\u003e\u003cspan style=\"font-family: 'Arial',sans-serif; color: black;\" data-mce-style=\"font-family: 'Arial',sans-serif; color: black;\"\u003e - \u003c\/span\u003e\u003c\/span\u003e\u003cspan style=\"font-family: 'Arial',sans-serif; color: black;\" data-mce-style=\"font-family: 'Arial',sans-serif; color: black;\"\u003eYour clutch was shipped with a predetermined roller size for your application. There are 3 sizes of rollers available: standard, 1mm oversize, and 2mm oversize. Bigger rollers make the low end \"quicker RPM's\" but shift out quicker and lower the full shift RPM. Smaller rollers make the engine slower shift and raise the full shift RPM. This has to do with the angle of the arms combined with the weight difference of the rollers. \u003cspan class=\"c2\"\u003e\u003cb\u003eIMPORTANT\u003c\/b\u003e\u003c\/span\u003e \u003cspan class=\"c2\"\u003e\u003cb\u003e- As with the ramp angle, roller size must be done in pairs across from each other. Failure to do so will result in an imbalance of the clutch and possibly failure.\u003c\/b\u003e\u003c\/span\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp class=\"c19\" style=\"margin: 0in; text-align: justify;\" data-mce-style=\"margin: 0in; text-align: justify;\"\u003e \u003c\/p\u003e\n\u003cp class=\"c22\" style=\"margin: 0in; text-align: justify;\" data-mce-style=\"margin: 0in; text-align: justify;\"\u003e\u003cspan class=\"c5\"\u003e\u003cb\u003e\u003cspan style=\"font-family: 'Arial',sans-serif; color: black;\" data-mce-style=\"font-family: 'Arial',sans-serif; color: black;\"\u003eWeight \u003c\/span\u003e\u003c\/b\u003e\u003c\/span\u003e\u003cspan class=\"c2\"\u003e\u003cb\u003e\u003cspan style=\"font-family: 'Arial',sans-serif; color: black;\" data-mce-style=\"font-family: 'Arial',sans-serif; color: black;\"\u003eA\u003c\/span\u003e\u003c\/b\u003e\u003c\/span\u003e\u003cspan class=\"c5\"\u003e\u003cb\u003e\u003cspan style=\"font-family: 'Arial',sans-serif; color: black;\" data-mce-style=\"font-family: 'Arial',sans-serif; color: black;\"\u003edjustment\u003c\/span\u003e\u003c\/b\u003e\u003c\/span\u003e\u003cspan style=\"font-family: 'Arial',sans-serif; color: black;\" data-mce-style=\"font-family: 'Arial',sans-serif; color: black;\"\u003e - The weight in the arms can be adjusted in two ways: set screws in the arms, and washers on the roller thru bolt. As with all other clutches, add weight to lower RPM, remove weight to raise RPM. Set screws in the arms affect the low-speed shift points more than the high speed and will reduce the max RPM, and weight on the roller bolt acts like tip weight in a conventional clutch affecting the high speed more than any other part of the curve. Adjust this as needed for your application. \u003cspan class=\"c14\"\u003e\u003cb\u003eIMPORTANT - As with all other adjustments, do this evenly and only in pairs across from each other, failure to do so will result in an imbalance of the clutch and possible failure.\u003c\/b\u003e\u003c\/span\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003e \u003c\/p\u003e\n\u003ch1 data-mce-fragment=\"1\"\u003eINSTRUCTIONS\u003c\/h1\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0054\/6786\/5134\/files\/TAPP_x_Evolution_Clutching_Instructions_0f640e4e-8e3b-43b4-a6fb-a8d783096f1d.pdf?v=1687540083\" target=\"_blank\"\u003eCan Am Maverick X3 Tapp Primary Clutch Kit by EVP.MOde\u003c\/a\u003e\u003c\/p\u003e","brand":"TAPP","offers":[{"title":"Stock Injector Stage 1-3 (2200 RPM)","offer_id":40598346661934,"sku":"2282010036","price":2700.0,"currency_code":"USD","in_stock":true},{"title":"Stock Injector Stage 1-3 (2500 RPM)","offer_id":40598349676590,"sku":"2282010037","price":2700.0,"currency_code":"USD","in_stock":true},{"title":"Stock Injector Stage 3R-93 (1800 RPM","offer_id":40598349709358,"sku":"2282010039","price":2700.0,"currency_code":"USD","in_stock":true},{"title":"Stock Injector Stage 3R-93 (2200 RPM)","offer_id":40598349742126,"sku":"2282010038","price":2700.0,"currency_code":"USD","in_stock":true},{"title":"Stock Injector Stage 3R-93 (2300 RPM)","offer_id":40598349774894,"sku":"2282010040","price":2700.0,"currency_code":"USD","in_stock":true},{"title":"Big Injector Stage Stage 4X100-5X85 (2000 RPM)","offer_id":40598349807662,"sku":"2282010041","price":2700.0,"currency_code":"USD","in_stock":true},{"title":"Big Injector Stage Stage 4X100-5X85 (2300 RPM)","offer_id":40598349840430,"sku":"2282010042","price":2700.0,"currency_code":"USD","in_stock":true},{"title":"Big Injector Stage Stage 4X100-5X85 (3000 RPM)","offer_id":40598349873198,"sku":"2282010043","price":2700.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0054\/6786\/5134\/files\/tapp_clutch_1_fbba2da3-f316-43c4-b53a-7205713bdf39.jpg?v=1764796771"},{"product_id":"evp-tapp-roller-primary-clutch-for-2018-21-can-am-maverick-x3-turbo-r-with-evp-ecu-power-flash","title":"EVP TAPP Roller Primary Clutch for 2018-'22 Can-Am Maverick X3 Turbo \u0026 Turbo R with EVP ECU Power Flash","description":"\u003ch1 data-mce-fragment=\"1\"\u003eDESCRIPTION\u003c\/h1\u003e\n\u003cp\u003e\u003cspan data-mce-fragment=\"1\"\u003e\u003cstrong\u003eNEW EVP TAPP CLUTCH UPDATES (2024):\u003c\/strong\u003e \u003cbr\u003e\u003c\/span\u003e\u003cspan data-mce-fragment=\"1\"\u003eDon't think a TAPP clutch can be any smoother and more responsive than it already is? Think again. The all-new Roller Spider design for TAPP Primary Clutches replaces the original button spider assembly for instant power delivery due to the reduction in friction between the spider and movable sheave. This results in even better belt grip than before, lower belt temps, better belt life, and buttery smooth engagement that's guaranteed to keep your car dialed in any riding condition.\u003c\/span\u003e The patent-pending TAPP Roller Primary Clutch is the next revolution in clutching technology.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eUPDATED FEATURES:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eROLLER SPIDER DESIGN:\u003c\/strong\u003e creates less friction in the movable sheave compared to button spiders for a much more responsive setup\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCENTER BEARING: \u003c\/strong\u003eNEW black nitrate coating (black finish) adds an extra layer of hardness, prevents rust corrosion, and reduces friction for even smoother clutch operation\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLARGER ROLLER:\u003c\/strong\u003e roller size has been increased from 2mm to 3mm, making a huge difference in longevity of the clutch bearing particularly under high horsepower and harsh conditions\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePOST: \u003c\/strong\u003eupdated with additional material and new heat-treating process, allowing the clutch to be over-torqued from factory specs by preventing the clutch from slipping on the shaft (necessary for high-horsepower builds and\/or drag racing setups)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMOVEABLE SHEAVE: \u003c\/strong\u003eadded material with the new roller spider design, reinforcing the clutch towers for greater load-bearing capabilities\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCLUTCH COVER:\u003c\/strong\u003e the billet aluminum clutch cover now features larger \"windows\" to allow additional weight without having to modify the clutch cover\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eORIGINAL FEATURES:\u003c\/strong\u003e\u003cbr\u003eWhen it comes to the dark art of clutching, it takes more than a horsepower range to properly tune a clutch that meets your UTV's needs. With calibrations ranging from stock through all EVP Paragon, Dynomite (DM) and Desert Storm (DS) turbo upgrades, EVP-spec TAPP clutches are the most fine-tuned, responsive and dependable X3 primary clutches available. EVP-spec TAPP Clutches are tuned to get the most out of your machine regardless of how or where you ride. Experience throttle response that pins your back to the seat, responsive power put down via excellent belt grip, and cooler clutch operating temps for enhanced belt and clutch life.\u003cbr\u003e\u003cbr\u003eEVP-spec TAPP Primary Clutches for X3 models are calibrated specifically for use with the OEM secondary clutch with EVP internals including Shift-Tek Helix and Spring.\u003cbr\u003e\u003cbr\u003eIf you don't have an EVP turbo package or you're running a stock X3, you can still enjoy all the benefits and performance of an EVP-spec TAPP primary clutch. TAPP clutches are renowned for being incredibly easy to tune. EVP techs will calibrate your clutch to a specific horsepower level and desired RPM engagement, leaving the final fine-tuning to you.\u003c\/p\u003e\n\u003cp\u003e\u003cmeta charset=\"utf-8\"\u003e\u003cspan data-mce-fragment=\"1\"\u003eAll EVP TAPP primary clutch kits include full standard weight kit as well as tungsten race weights (set of 8).\u003c\/span\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eDURABLE PERFORMANCE:\u003c\/strong\u003e Designed with the durability that high-horsepower UTV's demand, TAPP clutches are built from billet aluminum and other high-tech materials that can withstand extreme heat and extend clutch life, so you can spend more time riding and less time in the shop. EVP has used TAPP clutches on our all-out drag race Can Am X3 and Polaris XPT vehicles with very high engagement launches without failure. The OEM primary clutch is reliable up to about 300 hp, but an EVP TAPP primary can easily handle anything from 200-500+ hp and all terrain and riding styles - drag race, duning, trail riding, rock crawling, short course and desert racing - all with the unrivaled quality, durability and performance expected out of a TAPP Clutch.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eADJUSTABLE \u0026amp; VERSATILE: \u003c\/strong\u003eTAPP clutches are a game-changer when it comes to tuning and adjustability, allowing your clutch to easily evolve as your UTV's power level evolves. The two-sided ramps are swapped in minutes with just an Allen wrench. The clickers are adjusted externally, which can raise or lower the entire shift pattern easily. The roller arms allow mass to be added or removed by removing the clutch cover, and there are a variety of TAPP and EVP primary springs available for fine-tuning. Lastly, the TAPP clutch is also extremely forgiving, allowing a wide variety of helix angles to work with a given primary clutch calibration.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCOOLER TEMPS:\u003c\/strong\u003e TAPP primary clutches run cooler than any clutch on the market. High-tech materials, extensive venting for optimum airflow, and cooler belt temperatures thanks to the multi-angle curved sheaves all contribute to extending belt and overall clutch life‚Äîeven under the most demanding abuse.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eINSTANT THROTTLE RESPONSE: \u003c\/strong\u003eTAPP primary clutches are intended for customers that demand responsiveness and durability from their CVT drive system whether their UTV is relatively stock or all-out big turbo drag race trim. The centralized mass and lightweight, low-inertia design coupled with multi-angled curved sheaves and custom ramp angles deliver unbeatable belt grip, instantaneous throttle response and surefire power to the ground.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSMOOTH, QUIET OPERATION: \u003c\/strong\u003eThe arms don't 'swing out' like a traditional flyweight but instead ride on a ramp system, which allows the clutch to be remarkably smooth and perform with minimal vibration. You will feel and hear the difference.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003e\u003ci\u003e\u003cstrong\u003eDisclaimer:\u003c\/strong\u003e \u003cmeta charset=\"utf-8\"\u003eEVP only\u003cspan data-mce-fragment=\"1\"\u003e \u003c\/span\u003eoffers Tech Support for EVP-Spec TAPP clutches purchased directly from EVP. All EVP Calibrated Tapp Clutch primaries may require minor calibration changes. If you need tuning support, please reference our instructions page or contact our technical department. \u003c\/i\u003e\u003cbr\u003e\u003cbr\u003eUnsure which clutch calibration is right for you? Give us a call! EVP Team members are available from 8:30am to 5:00pm CST and can help dial in the perfect clutch for your setup: (715) 247-3862\u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003ch1\u003eCALIBRATION GUIDE\u003c\/h1\u003e\n\u003cp class=\"c16\" style=\"margin: 0in;\" data-mce-style=\"margin: 0in;\"\u003e\u003cspan class=\"c0\"\u003e\u003cspan style=\"font-family: 'Arial',sans-serif; color: black;\" data-mce-style=\"font-family: 'Arial',sans-serif; color: black;\"\u003eThere are 4 main adjustable components in an EVP Spec TAPP Clutch, these are:\u003c\/span\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp class=\"c16\" style=\"margin: 0in;\" data-mce-style=\"margin: 0in;\"\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cp class=\"c22\" style=\"margin: 0in; text-align: justify;\" data-mce-style=\"margin: 0in; text-align: justify;\"\u003e\u003cspan class=\"c5\"\u003e\u003cb\u003e\u003cspan style=\"font-family: 'Arial',sans-serif; color: black;\" data-mce-style=\"font-family: 'Arial',sans-serif; color: black;\"\u003eRamp \u003c\/span\u003e\u003c\/b\u003e\u003c\/span\u003e\u003cspan class=\"c2\"\u003e\u003cb\u003e\u003cspan style=\"font-family: 'Arial',sans-serif; color: black;\" data-mce-style=\"font-family: 'Arial',sans-serif; color: black;\"\u003eP\u003c\/span\u003e\u003c\/b\u003e\u003c\/span\u003e\u003cspan class=\"c5\"\u003e\u003cb\u003e\u003cspan style=\"font-family: 'Arial',sans-serif; color: black;\" data-mce-style=\"font-family: 'Arial',sans-serif; color: black;\"\u003erofile\u003c\/span\u003e\u003c\/b\u003e\u003c\/span\u003e\u003cspan class=\"c5\"\u003e\u003cspan style=\"font-family: 'Arial',sans-serif; color: black;\" data-mce-style=\"font-family: 'Arial',sans-serif; color: black;\"\u003e - \u003c\/span\u003e\u003c\/span\u003e\u003cspan class=\"c0\"\u003e\u003cspan style=\"font-family: 'Arial',sans-serif; color: black;\" data-mce-style=\"font-family: 'Arial',sans-serif; color: black;\"\u003eYour TAPP clutch comes with a set of pre-chosen ramps that have been tested in many scenarios and have been deemed to be the most generic in most situations. Changing the angle or profile of the ramp will have many effects on the shift profile. This should only be done by an experienced tuner; you will likely not need to change this.\u003c\/span\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp class=\"c22\" style=\"margin: 0in; text-align: justify;\" data-mce-style=\"margin: 0in; text-align: justify;\"\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cp class=\"c22\" style=\"margin: 0in; text-align: justify;\" data-mce-style=\"margin: 0in; text-align: justify;\"\u003e\u003cspan class=\"c5\"\u003e\u003cb\u003e\u003cspan style=\"font-family: 'Arial',sans-serif; color: black;\" data-mce-style=\"font-family: 'Arial',sans-serif; color: black;\"\u003eRamp \u003c\/span\u003e\u003c\/b\u003e\u003c\/span\u003e\u003cspan class=\"c2\"\u003e\u003cb\u003e\u003cspan style=\"font-family: 'Arial',sans-serif; color: black;\" data-mce-style=\"font-family: 'Arial',sans-serif; color: black;\"\u003eA\u003c\/span\u003e\u003c\/b\u003e\u003c\/span\u003e\u003cspan class=\"c5\"\u003e\u003cb\u003e\u003cspan style=\"font-family: 'Arial',sans-serif; color: black;\" data-mce-style=\"font-family: 'Arial',sans-serif; color: black;\"\u003engle\u003c\/span\u003e\u003c\/b\u003e\u003c\/span\u003e\u003cspan class=\"c5\"\u003e\u003cspan style=\"font-family: 'Arial',sans-serif; color: black;\" data-mce-style=\"font-family: 'Arial',sans-serif; color: black;\"\u003e - \u003c\/span\u003e\u003c\/span\u003e\u003cspan style=\"font-family: 'Arial',sans-serif; color: black;\" data-mce-style=\"font-family: 'Arial',sans-serif; color: black;\"\u003eThe ramp angle in your TAPP Clutch is adjustable from the outside via the use of the Quick Shift Bolts. As with other clicker style clutches, the higher the number, the higher the RPM. This will mainly affect the full shift speed but also affects the engagement and low speed slightly. \u003cspan class=\"c2\"\u003e\u003cb\u003eIMPORTANT\u003c\/b\u003e\u003c\/span\u003e \u003cspan class=\"c14\"\u003e\u003cb\u003e- Always adjust the ramp angle in pairs across from each other. If you do not, the clutch will be out of balance.\u003c\/b\u003e\u003c\/span\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp class=\"c22\" style=\"margin: 0in; text-align: justify;\" data-mce-style=\"margin: 0in; text-align: justify;\"\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cp class=\"c19\" style=\"margin: 0in; text-align: justify;\" data-mce-style=\"margin: 0in; text-align: justify;\"\u003e\u003cspan class=\"c5\"\u003e\u003cb\u003e\u003cspan style=\"font-family: 'Arial',sans-serif; color: black;\" data-mce-style=\"font-family: 'Arial',sans-serif; color: black;\"\u003eRoller \u003c\/span\u003e\u003c\/b\u003e\u003c\/span\u003e\u003cspan class=\"c2\"\u003e\u003cb\u003e\u003cspan style=\"font-family: 'Arial',sans-serif; color: black;\" data-mce-style=\"font-family: 'Arial',sans-serif; color: black;\"\u003eS\u003c\/span\u003e\u003c\/b\u003e\u003c\/span\u003e\u003cspan class=\"c5\"\u003e\u003cb\u003e\u003cspan style=\"font-family: 'Arial',sans-serif; color: black;\" data-mce-style=\"font-family: 'Arial',sans-serif; color: black;\"\u003eize\u003c\/span\u003e\u003c\/b\u003e\u003c\/span\u003e\u003cspan class=\"c5\"\u003e\u003cspan style=\"font-family: 'Arial',sans-serif; color: black;\" data-mce-style=\"font-family: 'Arial',sans-serif; color: black;\"\u003e - \u003c\/span\u003e\u003c\/span\u003e\u003cspan style=\"font-family: 'Arial',sans-serif; color: black;\" data-mce-style=\"font-family: 'Arial',sans-serif; color: black;\"\u003eYour clutch was shipped with a predetermined roller size for your application. There are 3 sizes of rollers available: standard, 1mm oversize, and 2mm oversize. Bigger rollers make the low end \"quicker RPM's\" but shift out quicker and lower the full shift RPM. Smaller rollers make the engine slower shift and raise the full shift RPM. This has to do with the angle of the arms combined with the weight difference of the rollers. \u003cspan class=\"c2\"\u003e\u003cb\u003eIMPORTANT\u003c\/b\u003e\u003c\/span\u003e \u003cspan class=\"c2\"\u003e\u003cb\u003e- As with the ramp angle, roller size must be done in pairs across from each other. Failure to do so will result in an imbalance of the clutch and possibly failure.\u003c\/b\u003e\u003c\/span\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp class=\"c19\" style=\"margin: 0in; text-align: justify;\" data-mce-style=\"margin: 0in; text-align: justify;\"\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cp class=\"c22\" style=\"margin: 0in; text-align: justify;\" data-mce-style=\"margin: 0in; text-align: justify;\"\u003e\u003cspan class=\"c5\"\u003e\u003cb\u003e\u003cspan style=\"font-family: 'Arial',sans-serif; color: black;\" data-mce-style=\"font-family: 'Arial',sans-serif; color: black;\"\u003eWeight \u003c\/span\u003e\u003c\/b\u003e\u003c\/span\u003e\u003cspan class=\"c2\"\u003e\u003cb\u003e\u003cspan style=\"font-family: 'Arial',sans-serif; color: black;\" data-mce-style=\"font-family: 'Arial',sans-serif; color: black;\"\u003eA\u003c\/span\u003e\u003c\/b\u003e\u003c\/span\u003e\u003cspan class=\"c5\"\u003e\u003cb\u003e\u003cspan style=\"font-family: 'Arial',sans-serif; color: black;\" data-mce-style=\"font-family: 'Arial',sans-serif; color: black;\"\u003edjustment\u003c\/span\u003e\u003c\/b\u003e\u003c\/span\u003e\u003cspan style=\"font-family: 'Arial',sans-serif; color: black;\" data-mce-style=\"font-family: 'Arial',sans-serif; color: black;\"\u003e - The weight in the arms can be adjusted in two ways: set screws in the arms, and washers on the roller thru bolt. As with all other clutches, add weight to lower RPM, remove weight to raise RPM. Set screws in the arms affect the low-speed shift points more than the high speed and will reduce the max RPM, and weight on the roller bolt acts like tip weight in a conventional clutch affecting the high speed more than any other part of the curve. Adjust this as needed for your application. \u003cspan class=\"c14\"\u003e\u003cb\u003eIMPORTANT - As with all other adjustments, do this evenly and only in pairs across from each other, failure to do so will result in an imbalance of the clutch and possible failure.\u003c\/b\u003e\u003c\/span\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003ch1 data-mce-fragment=\"1\"\u003eINSTRUCTIONS\u003c\/h1\u003e\n\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0054\/6786\/5134\/files\/TAPP_x_Evolution_Clutching_Instructions_0f640e4e-8e3b-43b4-a6fb-a8d783096f1d.pdf?v=1687540083\" target=\"_blank\"\u003eCan Am Maverick X3 Tapp Primary Clutch Kit by EVP.MOde\u003c\/a\u003e","brand":"TAPP","offers":[{"title":"Stage 1-3R (2200 RPM)","offer_id":40599699259438,"sku":"2282010031","price":2700.0,"currency_code":"USD","in_stock":true},{"title":"Stage 3R-93 - 4RWi (2200 RPM)","offer_id":40599702241326,"sku":"2282010032","price":2700.0,"currency_code":"USD","in_stock":true},{"title":"Stage 3R-93 - 4RWi (2500 RPM)","offer_id":40599702274094,"sku":"2282010033","price":2700.0,"currency_code":"USD","in_stock":true},{"title":"Stage 4-X100 - 5-X85 (1800 RPM)","offer_id":40599702306862,"sku":"2282010044","price":2700.0,"currency_code":"USD","in_stock":true},{"title":"Stage 4-X100 - 5-X85 (2000 RPM)","offer_id":40599702339630,"sku":"2282010045","price":2700.0,"currency_code":"USD","in_stock":true},{"title":"Stage 4-X100 - 5-X85 (2200 RPM)","offer_id":40599702372398,"sku":"2282010034","price":2700.0,"currency_code":"USD","in_stock":true},{"title":"Stage 4-X100 - 5-X85 (2300 RPM)","offer_id":40599702405166,"sku":"2282010035","price":2700.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0054\/6786\/5134\/files\/TAPP_OV1_CanAm_d15c0e5f-913b-40c6-9758-03f2fab4c19b.jpg?v=1706024131"},{"product_id":"evp-tapp-roller-primary-clutch-for-2023-can-am-maverick-x3-turbo-with-evp-ecu-power-flash","title":"EVP TAPP Roller Primary Clutch for 2023+ Can-Am Maverick X3 Turbo with EVP ECU Power Flash","description":"\u003ch1 data-mce-fragment=\"1\"\u003eDESCRIPTION\u003c\/h1\u003e\n\u003cp\u003e\u003cspan data-mce-fragment=\"1\"\u003e\u003cstrong\u003eNEW EVP TAPP CLUTCH UPDATES (2024):\u003c\/strong\u003e \u003cbr\u003e\u003c\/span\u003e\u003cspan data-mce-fragment=\"1\"\u003eDon't think a TAPP clutch can be any smoother and more responsive than it already is? Think again. The all-new Roller Spider design for TAPP Primary Clutches replaces the original button spider assembly for instant power delivery due to the reduction in friction between the spider and movable sheave. This results in even better belt grip than before, lower belt temps, better belt life, and buttery smooth engagement that's guaranteed to keep your car dialed in any riding condition.\u003c\/span\u003e The patent-pending TAPP Roller Primary Clutch is the next revolution in clutching technology.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eUPDATED FEATURES:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eROLLER SPIDER DESIGN:\u003c\/strong\u003e creates less friction in the movable sheave compared to button spiders for a much more responsive setup\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCENTER BEARING: \u003c\/strong\u003eNEW black nitrate coating (black finish) adds an extra layer of hardness, prevents rust corrosion, and reduces friction for even smoother clutch operation\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLARGER ROLLER:\u003c\/strong\u003e roller size has been increased from 2mm to 3mm, making a huge difference in longevity of the clutch bearing particularly under high horsepower and harsh conditions\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePOST: \u003c\/strong\u003eupdated with additional material and new heat-treating process, allowing the clutch to be over-torqued from factory specs by preventing the clutch from slipping on the shaft (necessary for high-horsepower builds and\/or drag racing setups)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMOVEABLE SHEAVE: \u003c\/strong\u003eadded material with the new roller spider design, reinforcing the clutch towers for greater load-bearing capabilities\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCLUTCH COVER:\u003c\/strong\u003e the billet aluminum clutch cover now features larger \"windows\" to allow additional weight without having to modify the clutch cover \u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eORIGINAL FEATURES:\u003c\/strong\u003e\u003cbr\u003eWhen it comes to the dark art of clutching, it takes more than a horsepower range to properly tune a clutch that meets your UTV's needs. With calibrations ranging from stock through all EVP Paragon, Dynomite (DM) and Desert Storm (DS) turbo upgrades, EVP-spec TAPP clutches are the most fine-tuned, responsive and dependable X3 primary clutches available. EVP-spec TAPP Clutches are tuned to get the most out of your machine regardless of how or where you ride. Experience throttle response that pins your back to the seat, responsive power put down via excellent belt grip, and cooler clutch operating temps for enhanced belt and clutch life.\u003cbr\u003e\u003cbr\u003eEVP-spec TAPP Primary Clutches for X3 models are calibrated specifically for use with the OEM secondary clutch with EVP internals including Shift-Tek Helix and Spring.\u003cbr\u003e\u003cbr\u003eIf you don't have an EVP turbo package or you're running a stock X3, you can still enjoy all the benefits and performance of an EVP-spec TAPP primary clutch. TAPP clutches are renowned for being incredibly easy to tune. EVP techs will calibrate your clutch to a specific horsepower level and desired RPM engagement, leaving the final fine-tuning to you.\u003c\/p\u003e\n\u003cp\u003e\u003cmeta charset=\"utf-8\"\u003e\u003cspan data-mce-fragment=\"1\"\u003eAll EVP TAPP primary clutch kits include full standard weight kit as well as tungsten race weights (set of 8).\u003c\/span\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eDURABLE PERFORMANCE:\u003c\/strong\u003e Designed with the durability that high-horsepower UTV's demand, TAPP clutches are built from billet aluminum and other high-tech materials that can withstand extreme heat and extend clutch life, so you can spend more time riding and less time in the shop. EVP has used TAPP clutches on our all-out drag race Can Am X3 and Polaris XPT vehicles with very high engagement launches without failure. The OEM primary clutch is reliable up to about 300 hp, but an EVP TAPP primary can easily handle anything from 200-500+ hp and all terrain and riding styles - drag race, duning, trail riding, rock crawling, short course and desert racing - all with the unrivaled quality, durability and performance expected out of a TAPP Clutch.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eADJUSTABLE \u0026amp; VERSATILE: \u003c\/strong\u003eTAPP clutches are a game-changer when it comes to tuning and adjustability, allowing your clutch to easily evolve as your UTV's power level evolves. The two-sided ramps are swapped in minutes with just an Allen wrench. The clickers are adjusted externally, which can raise or lower the entire shift pattern easily. The roller arms allow mass to be added or removed by removing the clutch cover, and there are a variety of TAPP and EVP primary springs available for fine-tuning. Lastly, the TAPP clutch is also extremely forgiving, allowing a wide variety of helix angles to work with a given primary clutch calibration.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCOOLER TEMPS:\u003c\/strong\u003e TAPP primary clutches run cooler than any clutch on the market. High-tech materials, extensive venting for optimum airflow, and cooler belt temperatures thanks to the multi-angle curved sheaves all contribute to extending belt and overall clutch life‚Äîeven under the most demanding abuse.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eINSTANT THROTTLE RESPONSE: \u003c\/strong\u003eTAPP primary clutches are intended for customers that demand responsiveness and durability from their CVT drive system whether their UTV is relatively stock or all-out big turbo drag race trim. The centralized mass and lightweight, low-inertia design coupled with multi-angled curved sheaves and custom ramp angles deliver unbeatable belt grip, instantaneous throttle response and surefire power to the ground.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSMOOTH, QUIET OPERATION: \u003c\/strong\u003eThe arms don't 'swing out' like a traditional flyweight but instead ride on a ramp system, which allows the clutch to be remarkably smooth and perform with minimal vibration. You will feel and hear the difference.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003ci\u003e\u003cstrong\u003eDisclaimer:\u003c\/strong\u003e \u003cmeta charset=\"utf-8\"\u003eEVP only\u003cspan data-mce-fragment=\"1\"\u003e \u003c\/span\u003eoffers Tech Support for EVP-Spec TAPP clutches purchased directly from EVP. All EVP Calibrated Tapp Clutch primaries may require minor calibration changes. If you need tuning support, please reference our instructions page or contact our technical department. \u003c\/i\u003e\u003cbr\u003e\u003cbr\u003eUnsure which clutch calibration is right for you? Give us a call! EVP Team members are available from 8:30am to 5:00pm CST and can help dial in the perfect clutch for your setup: (715) 247-3862\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003ch1\u003eCALIBRATION GUIDE\u003c\/h1\u003e\n\u003cp class=\"c16\" style=\"margin: 0in;\" data-mce-style=\"margin: 0in;\"\u003e\u003cspan class=\"c0\"\u003e\u003cspan style=\"font-family: 'Arial',sans-serif; color: black;\" data-mce-style=\"font-family: 'Arial',sans-serif; color: black;\"\u003eThere are 4 main adjustable components in an EVP Spec TAPP Clutch, these are:\u003c\/span\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp class=\"c16\" style=\"margin: 0in;\" data-mce-style=\"margin: 0in;\"\u003e \u003c\/p\u003e\n\u003cp class=\"c22\" style=\"margin: 0in; text-align: justify;\" data-mce-style=\"margin: 0in; text-align: justify;\"\u003e\u003cspan class=\"c5\"\u003e\u003cb\u003e\u003cspan style=\"font-family: 'Arial',sans-serif; color: black;\" data-mce-style=\"font-family: 'Arial',sans-serif; color: black;\"\u003eRamp \u003c\/span\u003e\u003c\/b\u003e\u003c\/span\u003e\u003cspan class=\"c2\"\u003e\u003cb\u003e\u003cspan style=\"font-family: 'Arial',sans-serif; color: black;\" data-mce-style=\"font-family: 'Arial',sans-serif; color: black;\"\u003eP\u003c\/span\u003e\u003c\/b\u003e\u003c\/span\u003e\u003cspan class=\"c5\"\u003e\u003cb\u003e\u003cspan style=\"font-family: 'Arial',sans-serif; color: black;\" data-mce-style=\"font-family: 'Arial',sans-serif; color: black;\"\u003erofile\u003c\/span\u003e\u003c\/b\u003e\u003c\/span\u003e\u003cspan class=\"c5\"\u003e\u003cspan style=\"font-family: 'Arial',sans-serif; color: black;\" data-mce-style=\"font-family: 'Arial',sans-serif; color: black;\"\u003e - \u003c\/span\u003e\u003c\/span\u003e\u003cspan class=\"c0\"\u003e\u003cspan style=\"font-family: 'Arial',sans-serif; color: black;\" data-mce-style=\"font-family: 'Arial',sans-serif; color: black;\"\u003eYour TAPP clutch comes with a set of pre-chosen ramps that have been tested in many scenarios and have been deemed to be the most generic in most situations. Changing the angle or profile of the ramp will have many effects on the shift profile. This should only be done by an experienced tuner; you will likely not need to change this.\u003c\/span\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp class=\"c22\" style=\"margin: 0in; text-align: justify;\" data-mce-style=\"margin: 0in; text-align: justify;\"\u003e \u003c\/p\u003e\n\u003cp class=\"c22\" style=\"margin: 0in; text-align: justify;\" data-mce-style=\"margin: 0in; text-align: justify;\"\u003e\u003cspan class=\"c5\"\u003e\u003cb\u003e\u003cspan style=\"font-family: 'Arial',sans-serif; color: black;\" data-mce-style=\"font-family: 'Arial',sans-serif; color: black;\"\u003eRamp \u003c\/span\u003e\u003c\/b\u003e\u003c\/span\u003e\u003cspan class=\"c2\"\u003e\u003cb\u003e\u003cspan style=\"font-family: 'Arial',sans-serif; color: black;\" data-mce-style=\"font-family: 'Arial',sans-serif; color: black;\"\u003eA\u003c\/span\u003e\u003c\/b\u003e\u003c\/span\u003e\u003cspan class=\"c5\"\u003e\u003cb\u003e\u003cspan style=\"font-family: 'Arial',sans-serif; color: black;\" data-mce-style=\"font-family: 'Arial',sans-serif; color: black;\"\u003engle\u003c\/span\u003e\u003c\/b\u003e\u003c\/span\u003e\u003cspan class=\"c5\"\u003e\u003cspan style=\"font-family: 'Arial',sans-serif; color: black;\" data-mce-style=\"font-family: 'Arial',sans-serif; color: black;\"\u003e - \u003c\/span\u003e\u003c\/span\u003e\u003cspan style=\"font-family: 'Arial',sans-serif; color: black;\" data-mce-style=\"font-family: 'Arial',sans-serif; color: black;\"\u003eThe ramp angle in your TAPP Clutch is adjustable from the outside via the use of the Quick Shift Bolts. As with other clicker style clutches, the higher the number, the higher the RPM. This will mainly affect the full shift speed but also affects the engagement and low speed slightly. \u003cspan class=\"c2\"\u003e\u003cb\u003eIMPORTANT\u003c\/b\u003e\u003c\/span\u003e \u003cspan class=\"c14\"\u003e\u003cb\u003e- Always adjust the ramp angle in pairs across from each other. If you do not, the clutch will be out of balance.\u003c\/b\u003e\u003c\/span\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp class=\"c22\" style=\"margin: 0in; text-align: justify;\" data-mce-style=\"margin: 0in; text-align: justify;\"\u003e \u003c\/p\u003e\n\u003cp class=\"c19\" style=\"margin: 0in; text-align: justify;\" data-mce-style=\"margin: 0in; text-align: justify;\"\u003e\u003cspan class=\"c5\"\u003e\u003cb\u003e\u003cspan style=\"font-family: 'Arial',sans-serif; color: black;\" data-mce-style=\"font-family: 'Arial',sans-serif; color: black;\"\u003eRoller \u003c\/span\u003e\u003c\/b\u003e\u003c\/span\u003e\u003cspan class=\"c2\"\u003e\u003cb\u003e\u003cspan style=\"font-family: 'Arial',sans-serif; color: black;\" data-mce-style=\"font-family: 'Arial',sans-serif; color: black;\"\u003eS\u003c\/span\u003e\u003c\/b\u003e\u003c\/span\u003e\u003cspan class=\"c5\"\u003e\u003cb\u003e\u003cspan style=\"font-family: 'Arial',sans-serif; color: black;\" data-mce-style=\"font-family: 'Arial',sans-serif; color: black;\"\u003eize\u003c\/span\u003e\u003c\/b\u003e\u003c\/span\u003e\u003cspan class=\"c5\"\u003e\u003cspan style=\"font-family: 'Arial',sans-serif; color: black;\" data-mce-style=\"font-family: 'Arial',sans-serif; color: black;\"\u003e - \u003c\/span\u003e\u003c\/span\u003e\u003cspan style=\"font-family: 'Arial',sans-serif; color: black;\" data-mce-style=\"font-family: 'Arial',sans-serif; color: black;\"\u003eYour clutch was shipped with a predetermined roller size for your application. There are 3 sizes of rollers available: standard, 1mm oversize, and 2mm oversize. Bigger rollers make the low end \"quicker RPM's\" but shift out quicker and lower the full shift RPM. Smaller rollers make the engine slower shift and raise the full shift RPM. This has to do with the angle of the arms combined with the weight difference of the rollers. \u003cspan class=\"c2\"\u003e\u003cb\u003eIMPORTANT\u003c\/b\u003e\u003c\/span\u003e \u003cspan class=\"c2\"\u003e\u003cb\u003e- As with the ramp angle, roller size must be done in pairs across from each other. Failure to do so will result in an imbalance of the clutch and possibly failure.\u003c\/b\u003e\u003c\/span\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp class=\"c19\" style=\"margin: 0in; text-align: justify;\" data-mce-style=\"margin: 0in; text-align: justify;\"\u003e \u003c\/p\u003e\n\u003cp class=\"c22\" style=\"margin: 0in; text-align: justify;\" data-mce-style=\"margin: 0in; text-align: justify;\"\u003e\u003cspan class=\"c5\"\u003e\u003cb\u003e\u003cspan style=\"font-family: 'Arial',sans-serif; color: black;\" data-mce-style=\"font-family: 'Arial',sans-serif; color: black;\"\u003eWeight \u003c\/span\u003e\u003c\/b\u003e\u003c\/span\u003e\u003cspan class=\"c2\"\u003e\u003cb\u003e\u003cspan style=\"font-family: 'Arial',sans-serif; color: black;\" data-mce-style=\"font-family: 'Arial',sans-serif; color: black;\"\u003eA\u003c\/span\u003e\u003c\/b\u003e\u003c\/span\u003e\u003cspan class=\"c5\"\u003e\u003cb\u003e\u003cspan style=\"font-family: 'Arial',sans-serif; color: black;\" data-mce-style=\"font-family: 'Arial',sans-serif; color: black;\"\u003edjustment\u003c\/span\u003e\u003c\/b\u003e\u003c\/span\u003e\u003cspan style=\"font-family: 'Arial',sans-serif; color: black;\" data-mce-style=\"font-family: 'Arial',sans-serif; color: black;\"\u003e - The weight in the arms can be adjusted in two ways: set screws in the arms, and washers on the roller thru bolt. As with all other clutches, add weight to lower RPM, remove weight to raise RPM. Set screws in the arms affect the low-speed shift points more than the high speed and will reduce the max RPM, and weight on the roller bolt acts like tip weight in a conventional clutch affecting the high speed more than any other part of the curve. Adjust this as needed for your application. \u003cspan class=\"c14\"\u003e\u003cb\u003eIMPORTANT - As with all other adjustments, do this evenly and only in pairs across from each other, failure to do so will result in an imbalance of the clutch and possible failure.\u003c\/b\u003e\u003c\/span\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003e \u003c\/p\u003e\n\u003ch1 data-mce-fragment=\"1\"\u003eINSTRUCTIONS\u003c\/h1\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0054\/6786\/5134\/files\/TAPP_x_Evolution_Clutching_Instructions_0f640e4e-8e3b-43b4-a6fb-a8d783096f1d.pdf?v=1687540083\" target=\"_blank\"\u003eCan Am Maverick X3 Tapp Primary Clutch Kit by EVP.MOde\u003c\/a\u003e\u003c\/p\u003e","brand":"TAPP","offers":[{"title":"Stock Injector Stage 3R-91 - 3R-93 (2200 RPM)","offer_id":40599876173870,"sku":"2282010026","price":2700.0,"currency_code":"USD","in_stock":true},{"title":"Stock Injector Stage 3R-91 - 3R-93 (2300 RPM)","offer_id":40599871586350,"sku":"2282010027","price":2700.0,"currency_code":"USD","in_stock":true},{"title":"Big Injector Stage 4RWi-100 - 5RWi-X85 (2000 RPM)","offer_id":40599876206638,"sku":"2282010028","price":2700.0,"currency_code":"USD","in_stock":true},{"title":"Big Injector Stage 4RWi-100 - 5RWi-X85 (2300 RPM)","offer_id":40599876239406,"sku":"2282010029","price":2700.0,"currency_code":"USD","in_stock":true},{"title":"Big Injector Stage 4RWi-100 - 5RWi-X85 (3200 RPM)","offer_id":40599876272174,"sku":"2282010030","price":2700.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0054\/6786\/5134\/files\/tapp_clutch_1_39b5b958-7a1e-4b25-8b99-37725f6bb29b.jpg?v=1764796942"},{"product_id":"evp-tapp-roller-primary-clutch-kit-for-2016-21-polaris-rzr-xp-turbo-s","title":"EVP TAPP Roller Primary Clutch Kit for 2016 - '21 Polaris RZR XP Turbo\/S","description":"\u003ch1 data-mce-fragment=\"1\"\u003eDESCRIPTION\u003c\/h1\u003e\n\u003cp\u003e\u003cspan data-mce-fragment=\"1\"\u003e\u003cstrong\u003eNEW EVP TAPP CLUTCH UPDATES (2024):\u003c\/strong\u003e\u003cbr\u003e\u003c\/span\u003e\u003cmeta charset=\"utf-8\"\u003e\u003cspan data-mce-fragment=\"1\"\u003eDon't think a TAPP clutch can be any smoother and more responsive than it already is? Think again. The all-new Roller Spider design for TAPP Primary Clutches replaces the original button spider assembly for instant power delivery due to the reduction in friction between the spider and movable sheave. This results in even better belt grip than before, lower belt temps, better belt life, and buttery smooth engagement that's guaranteed to keep your car dialed in any riding condition.\u003c\/span\u003e\u003cspan data-mce-fragment=\"1\"\u003e The patent-pending TAPP Roller Primary Clutch is the next revolution in clutching technology.\u003c\/span\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eUPDATED FEATURES:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eROLLER SPIDER DESIGN:\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003ecreates less friction in the movable sheave compared to button spiders for a much more responsive setup\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCENTER BEARING: \u003c\/strong\u003eNEW black nitrate coating (black finish) adds an extra layer of hardness, prevents rust corrosion, and reduces friction for even smoother clutch operation\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLARGER ROLLER:\u003c\/strong\u003e roller size has been increased from 2mm to 3mm, making a huge difference in longevity of the clutch bearing particularly under high horsepower and harsh conditions\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePOST: \u003c\/strong\u003eupdated with additional material and new heat-treating process, allowing the clutch to be over-torqued from factory specs by preventing the clutch from slipping on the shaft (necessary for high-horsepower builds and\/or drag racing setups)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMOVEABLE SHEAVE: \u003c\/strong\u003eadded material with the new roller spider design, reinforcing the clutch towers for greater load-bearing capabilities\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCLUTCH COVER:\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003ethe billet aluminum clutch cover now features larger \"windows\" to allow additional weight without having to modify the clutch cover\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eORIGINAL FEATURES:\u003cbr\u003e\u003c\/strong\u003eWhen it comes to the dark art of clutching, it takes more than a horsepower range to properly tune a clutch that meets your UTV's needs. With calibrations ranging from stock through all EVP Dynomite (DM) and Desert Storm (DS) turbo upgrades, EVP-Spec TAPP clutches are the most fine-tuned, responsive and dependable Polaris RZR primary clutches available. EVP TAPP Clutches are tuned to get the most out of your machine regardless of how or where you ride. Experience throttle response that pins your back to the seat, responsive power put down via excellent belt grip, and cooler clutch operating temps for enhanced belt and clutch life.\u003c\/p\u003e\n\u003cp\u003eEVP TAPP Primary Clutches for Polaris RZR models are calibrated to be used specifically with the EVP STM Tuner Secondary Clutch, or the OEM secondary clutch with EVP internals including Shift-Tek Helix and Spring.\u003c\/p\u003e\n\u003cp\u003eIf you don't have an EVP turbo package or you're running a stock RZR, you can still enjoy all the benefits and performance of an EVP TAPP primary clutch. TAPP clutches are renowned for being incredibly easy to tune. EVP techs will calibrate your clutch to a specific horsepower level and desired RPM engagement, leaving the final fine-tuning to you.\u003c\/p\u003e\n\u003cp\u003e\u003cmeta charset=\"utf-8\"\u003e\u003cspan\u003e\u003cstrong\u003eAll EVP TAPP primary clutch kits include full standard weight kit as well as tungsten TAPP Clutch Race Weights (set of 8).\u003c\/strong\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eDURABLE PERFORMANCE: \u003c\/strong\u003eDesigned with the durability that high-horsepower UTV's demand, TAPP clutches are built from billet aluminum and other high-tech materials that can withstand extreme heat and extend clutch life so that you can spend more time riding and less time in the shop. EVP has used TAPP clutches on our all-out drag race Can Am X3 and Polaris XPT vehicles with very high engagement launches without failure. The OEM primary clutch is reliable up to about 300 hp, but an EVP Spec TAPP primary can easily handle anything from 200-500+ hp and all terrain and riding styles - drag race, duning, trail riding, rock crawling, short course and desert racing - all with the unrivaled quality, durability and performance expected out of a TAPP Clutch.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eADJUSTABLE \u0026amp; VERSATILE: \u003c\/strong\u003eTAPP clutches are a game-changer when it comes to tuning and adjustability, allowing your clutch to easily evolve as your UTV's power level evolves. The two-sided ramps are swapped in minutes with just an Allen wrench. The clickers are adjusted externally, which can raise or lower the entire shift pattern easily. The roller arms allow mass to be added or removed by removing the clutch cover, and there are a variety of TAPP and EVP primary springs available for fine-tuning. Lastly, the TAPP clutch is also extremely forgiving, allowing a wide variety of helix angles to work with a given primary clutch calibration.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCOOLER TEMPS: \u003c\/strong\u003eTAPP primary clutches run cooler than any clutch on the market. High-tech materials, extensive venting for optimum airflow, and cooler belt temperatures thanks to the multi-angle curved sheaves all contribute to extending belt and overall clutch life‚ even under the most demanding abuse.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eINSTANT THROTTLE RESPONSE: \u003c\/strong\u003eTAPP primary clutches are intended for customers that demand responsiveness and durability from their CVT drive system whether their UTV is relatively stock or all-out big turbo drag race trim. The centralized mass and lightweight, low-inertia design coupled with multi-angled curved sheaves and custom ramp angles deliver unbeatable belt grip, instantaneous throttle response and surefire power to the ground.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSMOOTH, QUIET OPERATION:\u003c\/strong\u003e The arms don't 'swing out' like a traditional flyweight but instead ride on a ramp system, which allows the clutch to be remarkably smooth and perform with minimal vibration. You will feel and hear the difference. \u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cmeta charset=\"utf-8\"\u003e\u003cspan\u003e\u003ci\u003eDisclaimer: All EVP Calibrated Tapp Clutch primaries may require minor calibration changes. If you need tuning support, please reference our instructions page or contact our technical department.\u003c\/i\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003eUnsure which clutch calibration is right for you? Give us a call! EVP Team members are available from 8:30am to 5:00pm CST and can help dial in the perfect clutch for your setup: (715) 247-3862\u003c\/p\u003e\n\u003cp\u003e\u003ci\u003e\u003cstrong\u003eNOTES FOR \u003c\/strong\u003e\u003c\/i\u003e\u003cspan\u003e\u003ci\u003e\u003cstrong\u003e2021 XP Turbo\/S: \u003c\/strong\u003e\u003c\/i\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cspan\u003e\u003ci\u003eTo remove the OEM P90X primary clutch, you must use the EVP \u003c\/i\u003e\u003c\/span\u003e\u003ca href=\"https:\/\/evopowersports.com\/products\/clutch-puller-for-polaris-rzr-turbo-r-pro-r-pro-xp-2021-xp-turbo-s-2018-ranger-1000\" target=\"_blank\"\u003e\u003cspan\u003e\u003ci\u003e\u003cstrong\u003eClutch Puller For Polaris RZR Turbo R, Pro XP and '21 XP Turbo\/S\u003c\/strong\u003e\u003c\/i\u003e\u003c\/span\u003e\u003c\/a\u003e\u003cspan\u003e\u003ci\u003e (P\/N 875FP0010). \u003c\/i\u003e\u003c\/span\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cspan\u003e\u003ci\u003eTo remove the TAPP primary clutch off of 2021 XP Turbo\/S models, you must use the \u003c\/i\u003e\u003c\/span\u003e\u003ca href=\"https:\/\/evopowersports.com\/products\/polaris-rzr-xp-turbo-rzr-900-1000-xp-1000-rs1-ranger-900-general-1000-clutch-puller\" target=\"_blank\"\u003e\u003cspan\u003e\u003ci\u003e\u003cstrong\u003eRZR XP Turbo\/S Clutch Puller Tool\u003c\/strong\u003e\u003c\/i\u003e\u003c\/span\u003e\u003c\/a\u003e\u003cspan\u003e\u003ci\u003e (P\/N 875FP0004).\u003c\/i\u003e\u003c\/span\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003ch1\u003eFITMENT\u003c\/h1\u003e\n\u003cp\u003e2016+ RZR XP Turbo \u0026amp; Turbo S (all models)\u003c\/p\u003e\n\u003ch1\u003eCALIBRATION GUIDE\u003c\/h1\u003e\n\u003cp style=\"margin: 0in;\" class=\"c16\" data-mce-style=\"margin: 0in;\"\u003e\u003cspan class=\"c0\"\u003e\u003cspan style=\"font-family: 'Arial',sans-serif; color: black;\" data-mce-style=\"font-family: 'Arial',sans-serif; color: black;\"\u003eThere are 4 main adjustable components in an EVP Spec TAPP Clutch, these are:\u003c\/span\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp style=\"margin: 0in;\" class=\"c16\" data-mce-style=\"margin: 0in;\"\u003e \u003c\/p\u003e\n\u003cp style=\"margin: 0in; text-align: justify;\" class=\"c22\" data-mce-style=\"margin: 0in; text-align: justify;\"\u003e\u003cspan class=\"c5\"\u003e\u003cb\u003e\u003cspan style=\"font-family: 'Arial',sans-serif; color: black;\" data-mce-style=\"font-family: 'Arial',sans-serif; color: black;\"\u003eRamp \u003c\/span\u003e\u003c\/b\u003e\u003c\/span\u003e\u003cspan class=\"c2\"\u003e\u003cb\u003e\u003cspan style=\"font-family: 'Arial',sans-serif; color: black;\" data-mce-style=\"font-family: 'Arial',sans-serif; color: black;\"\u003eP\u003c\/span\u003e\u003c\/b\u003e\u003c\/span\u003e\u003cspan class=\"c5\"\u003e\u003cb\u003e\u003cspan style=\"font-family: 'Arial',sans-serif; color: black;\" data-mce-style=\"font-family: 'Arial',sans-serif; color: black;\"\u003erofile\u003c\/span\u003e\u003c\/b\u003e\u003c\/span\u003e\u003cspan class=\"c5\"\u003e\u003cspan style=\"font-family: 'Arial',sans-serif; color: black;\" data-mce-style=\"font-family: 'Arial',sans-serif; color: black;\"\u003e - \u003c\/span\u003e\u003c\/span\u003e\u003cspan class=\"c0\"\u003e\u003cspan style=\"font-family: 'Arial',sans-serif; color: black;\" data-mce-style=\"font-family: 'Arial',sans-serif; color: black;\"\u003eYour TAPP clutch comes with a set of pre-chosen ramps that have been tested in many scenarios and have been deemed to be the most generic in most situations. Changing the angle or profile of the ramp will have many effects on the shift profile. This should only be done by an experienced tuner; you will likely not need to change this.\u003c\/span\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp style=\"margin: 0in; text-align: justify;\" class=\"c22\" data-mce-style=\"margin: 0in; text-align: justify;\"\u003e \u003c\/p\u003e\n\u003cp style=\"margin: 0in; text-align: justify;\" class=\"c22\" data-mce-style=\"margin: 0in; text-align: justify;\"\u003e\u003cspan class=\"c5\"\u003e\u003cb\u003e\u003cspan style=\"font-family: 'Arial',sans-serif; color: black;\" data-mce-style=\"font-family: 'Arial',sans-serif; color: black;\"\u003eRamp \u003c\/span\u003e\u003c\/b\u003e\u003c\/span\u003e\u003cspan class=\"c2\"\u003e\u003cb\u003e\u003cspan style=\"font-family: 'Arial',sans-serif; color: black;\" data-mce-style=\"font-family: 'Arial',sans-serif; color: black;\"\u003eA\u003c\/span\u003e\u003c\/b\u003e\u003c\/span\u003e\u003cspan class=\"c5\"\u003e\u003cb\u003e\u003cspan style=\"font-family: 'Arial',sans-serif; color: black;\" data-mce-style=\"font-family: 'Arial',sans-serif; color: black;\"\u003engle\u003c\/span\u003e\u003c\/b\u003e\u003c\/span\u003e\u003cspan class=\"c5\"\u003e\u003cspan style=\"font-family: 'Arial',sans-serif; color: black;\" data-mce-style=\"font-family: 'Arial',sans-serif; color: black;\"\u003e - \u003c\/span\u003e\u003c\/span\u003e\u003cspan style=\"font-family: 'Arial',sans-serif; color: black;\" data-mce-style=\"font-family: 'Arial',sans-serif; color: black;\"\u003eThe ramp angle in your TAPP Clutch is adjustable from the outside via the use of the Quick Shift Bolts. As with other clicker style clutches, the higher the number, the higher the RPM. This will mainly affect the full shift speed but also affects the engagement and low speed slightly. \u003cspan class=\"c2\"\u003e\u003cb\u003eIMPORTANT\u003c\/b\u003e\u003c\/span\u003e \u003cspan class=\"c14\"\u003e\u003cb\u003e- Always adjust the ramp angle in pairs across from each other. If you do not, the clutch will be out of balance.\u003c\/b\u003e\u003c\/span\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp style=\"margin: 0in; text-align: justify;\" class=\"c22\" data-mce-style=\"margin: 0in; text-align: justify;\"\u003e \u003c\/p\u003e\n\u003cp style=\"margin: 0in; text-align: justify;\" class=\"c19\" data-mce-style=\"margin: 0in; text-align: justify;\"\u003e\u003cspan class=\"c5\"\u003e\u003cb\u003e\u003cspan style=\"font-family: 'Arial',sans-serif; color: black;\" data-mce-style=\"font-family: 'Arial',sans-serif; color: black;\"\u003eRoller \u003c\/span\u003e\u003c\/b\u003e\u003c\/span\u003e\u003cspan class=\"c2\"\u003e\u003cb\u003e\u003cspan style=\"font-family: 'Arial',sans-serif; color: black;\" data-mce-style=\"font-family: 'Arial',sans-serif; color: black;\"\u003eS\u003c\/span\u003e\u003c\/b\u003e\u003c\/span\u003e\u003cspan class=\"c5\"\u003e\u003cb\u003e\u003cspan style=\"font-family: 'Arial',sans-serif; color: black;\" data-mce-style=\"font-family: 'Arial',sans-serif; color: black;\"\u003eize\u003c\/span\u003e\u003c\/b\u003e\u003c\/span\u003e\u003cspan class=\"c5\"\u003e\u003cspan style=\"font-family: 'Arial',sans-serif; color: black;\" data-mce-style=\"font-family: 'Arial',sans-serif; color: black;\"\u003e - \u003c\/span\u003e\u003c\/span\u003e\u003cspan style=\"font-family: 'Arial',sans-serif; color: black;\" data-mce-style=\"font-family: 'Arial',sans-serif; color: black;\"\u003eYour clutch was shipped with a predetermined roller size for your application. There are 3 sizes of rollers available: standard, 1mm oversize, and 2mm oversize. Bigger rollers make the low end \"quicker RPM's\" but shift out quicker and lower the full shift RPM. Smaller rollers make the engine slower shift and raise the full shift RPM. This has to do with the angle of the arms combined with the weight difference of the rollers. \u003cspan class=\"c2\"\u003e\u003cb\u003eIMPORTANT\u003c\/b\u003e\u003c\/span\u003e \u003cspan class=\"c2\"\u003e\u003cb\u003e- As with the ramp angle, roller size must be done in pairs across from each other. Failure to do so will result in an imbalance of the clutch and possibly failure.\u003c\/b\u003e\u003c\/span\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp style=\"margin: 0in; text-align: justify;\" class=\"c19\" data-mce-style=\"margin: 0in; text-align: justify;\"\u003e \u003c\/p\u003e\n\u003cp style=\"margin: 0in; text-align: justify;\" class=\"c22\" data-mce-style=\"margin: 0in; text-align: justify;\"\u003e\u003cspan class=\"c5\"\u003e\u003cb\u003e\u003cspan style=\"font-family: 'Arial',sans-serif; color: black;\" data-mce-style=\"font-family: 'Arial',sans-serif; color: black;\"\u003eWeight \u003c\/span\u003e\u003c\/b\u003e\u003c\/span\u003e\u003cspan class=\"c2\"\u003e\u003cb\u003e\u003cspan style=\"font-family: 'Arial',sans-serif; color: black;\" data-mce-style=\"font-family: 'Arial',sans-serif; color: black;\"\u003eA\u003c\/span\u003e\u003c\/b\u003e\u003c\/span\u003e\u003cspan class=\"c5\"\u003e\u003cb\u003e\u003cspan style=\"font-family: 'Arial',sans-serif; color: black;\" data-mce-style=\"font-family: 'Arial',sans-serif; color: black;\"\u003edjustment\u003c\/span\u003e\u003c\/b\u003e\u003c\/span\u003e\u003cspan style=\"font-family: 'Arial',sans-serif; color: black;\" data-mce-style=\"font-family: 'Arial',sans-serif; color: black;\"\u003e - The weight in the arms can be adjusted in two ways: set screws in the arms, and washers on the roller thru bolt. As with all other clutches, add weight to lower RPM, remove weight to raise RPM. Set screws in the arms affect the low-speed shift points more than the high speed and will reduce the max RPM, and weight on the roller bolt acts like tip weight in a conventional clutch affecting the high speed more than any other part of the curve. Adjust this as needed for your application. \u003cspan class=\"c14\"\u003e\u003cb\u003eIMPORTANT - As with all other adjustments, do this evenly and only in pairs across from each other, failure to do so will result in an imbalance of the clutch and possible failure.\u003c\/b\u003e\u003c\/span\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003e \u003c\/p\u003e\n\u003ch1 data-mce-fragment=\"1\"\u003eINSTRUCTIONS\u003c\/h1\u003e\n\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e","brand":"TAPP","offers":[{"title":"Stage 2-91 through Stage 4-96 \/ 2500 RPM","offer_id":40772370006062,"sku":"2282020017","price":2700.0,"currency_code":"USD","in_stock":true},{"title":"Stage 5-E85 through Stage 3RWI-93 \/ 2300 RPM","offer_id":40772370038830,"sku":"2282020018","price":2700.0,"currency_code":"USD","in_stock":true},{"title":"Stage 4RWI-96 through Stage 5RWI-X85 \/ 2300 RPM","offer_id":40772370202670,"sku":"2282020019","price":2700.0,"currency_code":"USD","in_stock":true},{"title":"P50-350 through Stage X85 \/ 2600 RPM","offer_id":40772370235438,"sku":"2282020020","price":2700.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0054\/6786\/5134\/files\/tapp_clutch_1_73f23ea5-2e28-40ea-901e-e7bf20c88092.jpg?v=1712946894"},{"product_id":"stm-tuner-secondary-clutch-for-2022-polaris-pro-r","title":"STM Tuner Secondary Clutch for 2022+ Polaris RZR Pro R","description":"\u003ch1\u003eDESCRIPTION\u003c\/h1\u003e\n\u003cp\u003eThe EVP calibrated STM Tuner Maxxx Secondary is a must-have upgrade to get the absolute most out of any Pro R running a naturally aspirated tune or EVP's P54-330, P54-400, \u0026amp; P54-500 horsepower levels and avoid OEM clutch failure all together.\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003eAll new features of the Maxxx include larger rollers and helix, allowing more surface area for the roller to ride on, which reduces pressure and results in less wear and tear. All-billet construction with a finned design that creates more airflow within the clutch housing to help lower belt temperatures and all-around clutch temperatures. Additional features include significantly enhanced belt grip, STM's triple roller design for consistent up\/back shifts that are smoother and faster, and improved engine braking, among others.\u003c\/p\u003e\n\u003cp\u003eAll EVP STM Tuners come fully assembled and include a secondary spring and helix spec'd to EVP's custom calibrations, as well as hardware kit for installation (additional spring rates and helix angles are available directly through STM).\u003c\/p\u003e\n\u003cp\u003eFor best results, EVP recommends running the STM Tuner Secondary Clutch with our variety of EVP-Spec TAPP Primary Clutch Calibrations, \u003ca title=\"https:\/\/evopowersports.com\/products\/polaris-rzr-pro-r-tapp-primary-clutch-kit-by-evp\" rel=\"noreferrer noopener\" href=\"https:\/\/evopowersports.com\/products\/polaris-rzr-pro-r-tapp-primary-clutch-kit-by-evp\" target=\"_blank\"\u003e\u003cspan\u003e\u003cstrong\u003eAVAILABLE HERE\u003c\/strong\u003e\u003c\/span\u003e\u003c\/a\u003e.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eCalibrated specifically for your tune level up to EVP P54 Turbo Systems (TAPP Primary Clutch also required)\u003c\/li\u003e\n\u003cli\u003eAll-billet construction for added durability and reliability\u003c\/li\u003e\n\u003cli\u003eFinned secondary design provides more airflow for lower belt and clutch temps\u003c\/li\u003e\n\u003cli\u003eKit Includes a secondary spring, helix, and belt tool\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eAdditional spring rates and helix angles are available \u003cmeta charset=\"utf-8\"\u003ejust give us a call \u003cstrong\u003e(855) 387-8863\u003c\/strong\u003e.\u003c\/li\u003e\n\u003cli\u003eDual spring helix cap (optional) \u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch1\u003eFITMENT\u003c\/h1\u003e\n\u003cp\u003e2022+ Polaris RZR Turbo R Models\u003c\/p\u003e\n\u003ch1\u003eSTM WARRANTY\u003c\/h1\u003e\n\u003cp\u003e\u003cspan\u003e\u003cstrong\u003eSTM POWERSPORTS WARRANTY \u0026amp; RETURN POLICY (FOR STM CLUTCHING COMPONENTS)\u003c\/strong\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003eSeller warrants solely to Buyer that each product supplied under these Terms will, for 90 days from the date of the original purchase (the 'Warranty Period'), conform to Seller's written specifications during normal use and\/or operation. Seller's sole and exclusive obligation, and Buyer's sole remedy for failure of any product to conform to the above warranty is, at the option of Seller, repair or replacement of the non-conforming product or a refund of the monies paid by Buyer for the non-conforming product. Buyer must notify Seller in writing during the Warranty Period of any failure by a product to conform to the above warranty.\u003c\/p\u003e\n\u003cp\u003eBuyer will pay for shipping of any non-conforming product to Seller and Seller will pay for return shipping to Buyer. Liability under this warranty will be reduced to the extent that:\u003c\/p\u003e\n\u003col\u003e\n\u003cli\u003eThe product is not maintained according to Seller's or the applicable manufacturer's specifications.\u003c\/li\u003e\n\u003cli\u003eThe product fails, malfunctions, or is damaged as a result of improper handling, improper storage conditions (including, but not limited to, where applicable, temperature and humidity), installation, maintenance, removal, modification or repair.\u003c\/li\u003e\n\u003cli\u003eThe non-conformity is caused by casualty, abuse, or improper use\u003c\/li\u003e\n\u003cli\u003eThe product is altered other than by Seller or with Seller's express written approval.\u003c\/li\u003e\n\u003cli\u003eThe product is installed, used, or configured other than as contemplated by the parties under the applicable Supply Agreement or at or in a place other than that contemplated by the parties under the applicable Supply Agreement.\u003c\/li\u003e\n\u003cli\u003eThe product is used, operated, or connected with a third-party good or software not expressly designated by Seller's documentation and specifications for the product.\u003c\/li\u003e\n\u003cli\u003eAny failure results from a design or specification supplied by Buyer. Seller does not warrant any electrical components, normal wear and tear, or conditions resulting from misuse, abuse, negligence, accident, improper application, improper installation and\/or improper alteration.\u003c\/li\u003e\n\u003c\/ol\u003e\n\u003cp\u003ePrimary and secondary clutches that are determined to have a defect in material or manufacturing will be replaced at no charge within 90 days of original purchase date. Any racing application is void from warranty. Warranty claims require the return of the product in its original packaging. A $75.00 fee will be charged for inspection.\u003c\/p\u003e\n\u003cp\u003eSeller will determine, in its sole discretion, if any claims of failure were due to a defect in material or manufacturing. Warranty of premature wear will be determined by Seller, in its sole discretion. Buyer is responsible for shipping the alleged failed component to Seller and the return for warranty inspection. This warranty does not apply to any vehicle that has been altered in any way to include performance enhancements to the engine other than the original equipment design.\u003c\/p\u003e\n\u003cp\u003eElectrical components are not covered under any warranty and cannot be returned once installed or connected to power. Electrical components include but are not limited to: switches, ignition coils, CDI boxes, chips and regulators. Seller reserves the right to make the determination if the part has been subject to normal wear, misuse, abuse, negligence, accident, improper application, improper installation or alteration, and any such determination shall be final.\u003c\/p\u003e\n\u003cp\u003eAll warranty claims will be handled directly by the Seller. To obtain service under this warranty please contact the Seller for return authorization. Cost of removal, reinstallation, product pickup and delivery are the sole responsibility of the original Buyer. Retail customers must provide proof of purchase within 90 days for warranty to be honored.\u003c\/p\u003e\n\u003cp\u003eALL RETURNS FOR WARRANTY MUST BE PRE-APPROVED WITH AN RETURN AUTHORIZATION NUMBER DISPLAYED ON THE BOX. PRODUCT MUST BE RECEIVED WITHIN 10 DAYS OF DATE RETURN AUTHORIZATION IS ISSUED.\u003c\/p\u003e","brand":"STM","offers":[{"title":"Naturally Aspirated","offer_id":41104530079790,"sku":"2272020008","price":1511.0,"currency_code":"USD","in_stock":true},{"title":"P54-330 \u0026 P54-400 \u0026 P54-500 Turbo Systems","offer_id":41104530473006,"sku":"2272020009","price":1658.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0054\/6786\/5134\/files\/403FP0059_tt_1_f48b8670-c0eb-4e18-ab94-8a2281b68124.jpg?v=1748553347"},{"product_id":"stm-tuner-secondary-clutch-for-can-am-maverick-x3","title":"STM Tuner Secondary Clutch for Can-Am Maverick X3","description":"\u003ch1\u003eDESCRIPTION\u003c\/h1\u003e\n\u003cp\u003eWhether you're running an OEM, TAPP, or STM primary clutch, the STM Tuner Secondary is a must-have addition to get the absolute most out of any power level. STM Tuner Secondaries are all-billet construction and feature a finned design that creates more airflow within the clutch housing to help lower belt and all-around clutch temperatures. Additional features include significantly enhanced belt grip, STM's triple roller design for consistent up\/back shifts that are smoother and faster, and improved engine braking, among others.\u003c\/p\u003e\n\u003cp\u003e\u003cmeta charset=\"utf-8\"\u003e\u003cspan\u003eAll EVP STM Tuners come fully assembled and include a secondary spring\u003c\/span\u003e\u003cspan\u003e and helix spec'd to EVP's custom calibrations, as well as\u003c\/span\u003e\u003cspan\u003e hardware kit for installation (additional spring rates and helix angles are available directly through STM).\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003eFor best results, EVP recommends running the STM Tuner Secondary Clutch with our variety of EVP-Spec TAPP Primary Clutch Calibrations, \u003cspan style=\"color: rgb(212, 0, 0);\"\u003e\u003cstrong style=\"color: rgb(212, 0, 0);\"\u003e\u003ca href=\"https:\/\/evopowersports.com\/collections\/tapp-clutching\" rel=\"noopener\" target=\"_blank\"\u003eAVAILABLE HERE\u003c\/a\u003e\u003ca href=\"https:\/\/evopowersports.com\/products\/polaris-rzr-pro-xp-turbo-s-tapp-primary-clutch-kit-by-evp-mode\" target=\"_blank\"\u003e\u003c\/a\u003e\u003c\/strong\u003e\u003c\/span\u003e.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eAll-billet construction for added durability and reliability\u003c\/li\u003e\n\u003cli\u003eFinned secondary design provides more airflow for lower belt and clutch temps\u003c\/li\u003e\n\u003cli\u003eIncludes secondary spring\u003c\/li\u003e\n\u003cli\u003eIncludes helix\u003c\/li\u003e\n\u003cli\u003eAdditional spring rates and helix angles available directly through STM\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch1\u003eFITMENT\u003c\/h1\u003e\n\u003cp\u003e2017+ Can-Am Maverick X3 (All Models)\u003c\/p\u003e\n\u003ch1\u003eSTM WARRANTY\u003c\/h1\u003e\n\u003cp\u003e\u003cspan\u003e\u003cstrong\u003eSTM POWERSPORTS WARRANTY \u0026amp; RETURN POLICY (FOR STM CLUTCHING COMPONENTS)\u003c\/strong\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003eSeller warrants solely to Buyer that each product supplied under these Terms will, for 90 days from the date of the original purchase (the 'Warranty Period'), conform to Seller's written specifications during normal use and\/or operation. Seller's sole and exclusive obligation, and Buyer's sole remedy for failure of any product to conform to the above warranty is, at the option of Seller, repair or replacement of the non-conforming product or a refund of the monies paid by Buyer for the non-conforming product. Buyer must notify Seller in writing during the Warranty Period of any failure by a product to conform to the above warranty.\u003c\/p\u003e\n\u003cp\u003eBuyer will pay for shipping of any non-conforming product to Seller and Seller will pay for return shipping to Buyer. Liability under this warranty will be reduced to the extent that:\u003c\/p\u003e\n\u003col\u003e\n\u003cli\u003eThe product is not maintained according to Seller's or the applicable manufacturer's specifications.\u003c\/li\u003e\n\u003cli\u003eThe product fails, malfunctions, or is damaged as a result of improper handling, improper storage conditions (including, but not limited to, where applicable, temperature and humidity), installation, maintenance, removal, modification or repair.\u003c\/li\u003e\n\u003cli\u003eThe non-conformity is caused by casualty, abuse, or improper use\u003c\/li\u003e\n\u003cli\u003eThe product is altered other than by Seller or with Seller's express written approval.\u003c\/li\u003e\n\u003cli\u003eThe product is installed, used, or configured other than as contemplated by the parties under the applicable Supply Agreement or at or in a place other than that contemplated by the parties under the applicable Supply Agreement.\u003c\/li\u003e\n\u003cli\u003eThe product is used, operated, or connected with a third-party good or software not expressly designated by Seller's documentation and specifications for the product.\u003c\/li\u003e\n\u003cli\u003eAny failure results from a design or specification supplied by Buyer. Seller does not warrant any electrical components, normal wear and tear, or conditions resulting from misuse, abuse, negligence, accident, improper application, improper installation and\/or improper alteration.\u003c\/li\u003e\n\u003c\/ol\u003e\n\u003cp\u003ePrimary and secondary clutches that are determined to have a defect in material or manufacturing will be replaced at no charge within 90 days of original purchase date. Any racing application is void from warranty. Warranty claims require the return of the product in its original packaging. A $75.00 fee will be charged for inspection.\u003c\/p\u003e\n\u003cp\u003eSeller will determine, in its sole discretion, if any claims of failure were due to a defect in material or manufacturing. Warranty of premature wear will be determined by Seller, in its sole discretion. Buyer is responsible for shipping the alleged failed component to Seller and the return for warranty inspection. This warranty does not apply to any vehicle that has been altered in any way to include performance enhancements to the engine other than the original equipment design.\u003c\/p\u003e\n\u003cp\u003eElectrical components are not covered under any warranty and cannot be returned once installed or connected to power. Electrical components include but are not limited to: switches, ignition coils, CDI boxes, chips and regulators. Seller reserves the right to make the determination if the part has been subject to normal wear, misuse, abuse, negligence, accident, improper application, improper installation or alteration, and any such determination shall be final.\u003c\/p\u003e\n\u003cp\u003eAll warranty claims will be handled directly by the Seller. To obtain service under this warranty please contact the Seller for return authorization. Cost of removal, reinstallation, product pickup and delivery are the sole responsibility of the original Buyer. Retail customers must provide proof of purchase within 90 days for warranty to be honored.\u003c\/p\u003e\n\u003cp\u003eALL RETURNS FOR WARRANTY MUST BE PRE-APPROVED WITH AN RETURN AUTHORIZATION NUMBER DISPLAYED ON THE BOX. PRODUCT MUST BE RECEIVED WITHIN 10 DAYS OF DATE RETURN AUTHORIZATION IS ISSUED.\u003c\/p\u003e\n\u003c!----\u003e","brand":"STM","offers":[{"title":"Default Title","offer_id":41026637594670,"sku":"2272010002","price":1203.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0054\/6786\/5134\/products\/STM-X3-SECONDARY.jpg?v=1594414516"},{"product_id":"tapp-secondary-clutch-for-can-am-maverick-x3","title":"TAPP Secondary Clutch for Can-Am Maverick X3","description":"\u003ch1\u003eDESCRIPTION\u003c\/h1\u003e\n\u003cp\u003e\u003cb\u003e\u003ci\u003e\u003cspan data-olk-copy-source=\"MessageBody\"\u003eEVP DISCLAIMER:\u003c\/span\u003e\u003c\/i\u003e\u003c\/b\u003e\u003ci\u003e\u003cspan\u003e EVP’s current calibration setup for the new TAPP Secondary Clutch is for X3’s with approximately 215-400 crank horsepower. This includes all EVP X3 Stock Turbo Tunes, Paragon P43, P43R and P46 Turbo Upgrade Systems for Maverick X3. Additional EVP tuning and turbo calibrations are coming soon, along with multiple helix angle inserts and spring rates for custom\/fine-tuning.\u003c\/span\u003e\u003c\/i\u003e\u003cspan\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eAs the leading provider of TAPP Primary Clutches for the UTV market, EVP worked hand-in-hand with TAPP through numerous revisions to make the design the best possible. The clutch design for the secondary is every bit as innovative as TAPP’s primary clutch. What makes the TAPP Secondary so good is the engineering behind it. It is common knowledge in the industry that there are three main issues with existing secondary clutches: Durability, Roller life, and the necessity to run ridiculous spring pressures and\/or dual springs to make up for the poor clamping force. The TAPP secondary solves all of these issues. \u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eOn our 800 HP Pro R and Record Holding 43mm Turbo X3, we have made over 100 hits with full high-boost launches and have never broken a roller, fastener, or helix. We can do this while utilizing a mild torsion spring due to the high clamping force of the larger diameter helix. \u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eIn addition to solving these, TAPP adds further innovation by incorporating an adjustable spring rate helix cap and replaceable helix ramps. So, rather than buying entire helixes, you can now just replace the angles on the helix. We have also determined that the TAPP Secondary consistently posts the highest dyno numbers on a given tune\/calibration due to less belt slip through the secondary. \u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eThe Can-Am Maverick X3 EVP TAPP Secondary Clutch comes fully assembled with a 42-degree helix and a secondary spring.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFEATURES\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul type=\"disc\"\u003e\n\u003cli\u003e\n\u003cstrong\u003eOversize Helix Diameter: \u003c\/strong\u003eMaximizes the clamping force on the belt. One of the largest issues with existing designs is that a small hub limits both the spring coil diameter as well as the maximum force the helix can apply to the belt. Big horsepower cars no longer have to run a double spring.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLarger Helix Surface: \u003c\/strong\u003eAllows the use of wider rollers that can better distribute the tremendous loads they experience. This is especially true under drag race conditions. We are happy to report that we have put hundreds of runs on a set of rollers with full on 5000 RPM high boost launches. These drag race launches will damage or destroy all other clutch rollers within a few runs.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eReplaceable Helix Ramps:\u003c\/strong\u003e TAPP engineered an elegant solution so only parts of the helix ramps need to be changed when you want to change helix angles. \u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTorsionally Adjustable Spring Tension: \u003c\/strong\u003eThe design utilizes a torsional style helix cap with adjustable slots which allow the spring torsional tension to be used as a tuning feature.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUnmatched Performance:\u003c\/strong\u003e All of these design features add up to power, performance and longer belt life. At the 400 wheel horsepower level, just by changing to the TAPP secondary we were able to get another 15-20 horsepower to the wheels. Whether you are trail riding, dunning or racing, belt life will be extended when using a properly calibrated TAPP Clutch.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch1\u003eFITMENT\u003c\/h1\u003e\n\u003cp\u003e2017+ Can-Am Maverick X3 (All Models)\u003c\/p\u003e\n\u003ch1\u003eTAPP WARRANTY\u003c\/h1\u003e\n\u003cp\u003eFor warranty information, please contact TAPP online \u003ca href=\"https:\/\/tappclutch.com\/en-us\/pages\/contact-us\" rel=\"noopener\" target=\"_blank\"\u003ehere\u003c\/a\u003e.\u003c\/p\u003e\n\u003c!----\u003e","brand":"TAPP","offers":[{"title":"Less than 300HP","offer_id":42447354101806,"sku":"2282010058","price":1734.0,"currency_code":"USD","in_stock":true},{"title":"More than 300HP","offer_id":42447354134574,"sku":"2282010059","price":1734.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0054\/6786\/5134\/files\/407FC0274_tt_1_672f7236-93d7-42b4-bb2a-4aa076d81ea2.jpg?v=1730302481"},{"product_id":"tapp-secondary-clutch-for-polaris-rzr-pro-r","title":"TAPP Secondary Clutch for Polaris RZR Pro R","description":"\u003ch1\u003eDESCRIPTION\u003c\/h1\u003e\n\u003cp\u003e\u003cmeta charset=\"utf-8\"\u003e\u003cspan style=\"color: rgb(0, 0, 0);\"\u003e\u003cem\u003e\u003cstrong\u003e\u003cspan class=\"TextRun MacChromeBold SCXW62665621 BCX0\" lang=\"EN-US\"\u003e\u003cspan class=\"NormalTextRun SCXW62665621 BCX0\"\u003eEVP DISCLAIMER: \u003c\/span\u003e\u003c\/span\u003e\u003c\/strong\u003e\u003cspan class=\"TextRun MacChromeBold SCXW62665621 BCX0\" lang=\"EN-US\"\u003e\u003cspan class=\"NormalTextRun SCXW62665621 BCX0\"\u003eEVP’s current calibration setup for the new TAPP Secondary Clutch is for Pro R’s with approximately \u003c\/span\u003e\u003c\/span\u003e\u003cspan class=\"TextRun Highlight MacChromeBold SCXW62665621 BCX0\" lang=\"EN-US\"\u003e\u003cspan class=\"NormalTextRun SCXW62665621 BCX0\"\u003e215-400 crank horsepower\u003c\/span\u003e\u003c\/span\u003e\u003cspan class=\"TextRun MacChromeBold SCXW62665621 BCX0\" lang=\"EN-US\"\u003e\u003cspan class=\"NormalTextRun SCXW62665621 BCX0\"\u003e. This includes all EVP Pro R Stock Turbo Tunes, Paragon P\u003c\/span\u003e\u003cspan class=\"NormalTextRun SCXW62665621 BCX0\"\u003e54\u003c\/span\u003e\u003cspan class=\"NormalTextRun SCXW62665621 BCX0\"\u003e Turbo Upgrade Systems for \u003c\/span\u003e\u003cspan class=\"NormalTextRun SCXW62665621 BCX0\"\u003ePro R\u003c\/span\u003e\u003cspan class=\"NormalTextRun SCXW62665621 BCX0\"\u003e. \u003cmeta charset=\"utf-8\"\u003e \u003ci\u003e\u003cspan lang=\"EN-US\" class=\"TextRun MacChromeBold SCXW62665621 BCX0 NormalTextRun\"\u003eSecondary comes fully assembled with a 44-degree helix and secondary spring.\u003c\/span\u003e\u003c\/i\u003e\u003c\/span\u003e\u003c\/span\u003e\u003c\/em\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eAs the leading provider of TAPP Primary Clutches for the UTV market, EVP worked hand-in-hand with TAPP through numerous revisions to make the design the best possible. The clutch design for the secondary is every bit as innovative as TAPP’s primary clutch. What makes the TAPP Secondary so good is the engineering behind it. It is common knowledge in the industry that there are three main issues with existing secondary clutches: Durability, Roller life, and the necessity to run ridiculous spring pressures and\/or dual springs to make up for the poor clamping force. The TAPP secondary solves all of these issues. \u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eOn our 800 HP Pro R and Record Holding 43mm Turbo X3, we have made over 100 hits with full high-boost launches and have never broken a roller, fastener, or helix. We can do this while utilizing a mild torsion spring due to the high clamping force of the larger diameter helix. \u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eIn addition to solving these, TAPP adds further innovation by incorporating an adjustable spring rate helix cap and replaceable helix ramps. So, rather than buying entire helixes, you can now just replace the angles on the helix. We have also determined that the TAPP Secondary consistently posts the highest dyno numbers on a given tune\/calibration due to less belt slip through the secondary. \u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eThe Polaris RZR Pro R EVP TAPP Secondary Clutch comes fully assembled with a 44-degree helix and a secondary spring.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFEATURES\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul type=\"disc\"\u003e\n\u003cli\u003e\n\u003cstrong\u003eOversize Helix Diameter: \u003c\/strong\u003eMaximizes the clamping force on the belt. One of the largest issues with existing designs is that a small hub limits both the spring coil diameter as well as the maximum force the helix can apply to the belt. Big horsepower cars no longer have to run a double spring.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLarger Helix Surface: \u003c\/strong\u003eAllows the use of wider rollers that can better distribute the tremendous loads they experience. This is especially true under drag race conditions. We are happy to report that we have put hundreds of runs on a set of rollers with full on 5000 RPM high boost launches. These drag race launches will damage or destroy all other clutch rollers within a few runs.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eReplaceable Helix Ramps:\u003c\/strong\u003e TAPP engineered an elegant solution so only parts of the helix ramps need to be changed when you want to change helix angles. \u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTorsionally Adjustable Spring Tension: \u003c\/strong\u003eThe design utilizes a torsional style helix cap with adjustable slots which allow the spring torsional tension to be used as a tuning feature.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUnmatched Performance:\u003c\/strong\u003e All of these design features add up to power, performance and longer belt life. At the 400 wheel horsepower level, just by changing to the TAPP secondary we were able to get another 15-20 horsepower to the wheels. Whether you are trail riding, dunning or racing, belt life will be extended when using a properly calibrated TAPP Clutch.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch1\u003eFITMENT\u003c\/h1\u003e\n\u003cp\u003e\u003cmeta charset=\"utf-8\"\u003e2022+ Polaris RZR Pro R Models\u003c\/p\u003e\n\u003ch1\u003eINSTRUCTIONS\u003c\/h1\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003ch1\u003eTAPP WARRANTY\u003c\/h1\u003e\n\u003cp\u003eFor warranty information, please contact TAPP online \u003ca rel=\"noopener\" href=\"https:\/\/tappclutch.com\/en-us\/pages\/contact-us\" target=\"_blank\"\u003ehere\u003c\/a\u003e.\u003cspan style=\"font-family: -apple-system, BlinkMacSystemFont, 'San Francisco', 'Segoe UI', Roboto, 'Helvetica Neue', sans-serif; font-size: 0.875rem;\"\u003e\u003c\/span\u003e\u003c\/p\u003e","brand":"TAPP","offers":[{"title":"Less than 500HP","offer_id":42447382708270,"sku":"2282020038","price":1834.0,"currency_code":"USD","in_stock":true},{"title":"More than 500HP","offer_id":42447382741038,"sku":"2282020039","price":1834.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0054\/6786\/5134\/files\/407FC0274_tt_1_20191fdc-c65d-40c5-82dc-d46744910ac5.jpg?v=1769457955"},{"product_id":"polaris-xpedition-tapp-roller-primary-clutch-kit-by-evp","title":"Polaris Xpedition TAPP Roller Primary Clutch by EVP","description":"\u003ch1\u003eDESCRIPTION\u003c\/h1\u003e\n\u003cp\u003e\u003cmeta charset=\"utf-8\"\u003e\u003cspan data-teams=\"true\"\u003eThe ultimate solution for silencing in-cab clutching chatter and delivering the performance your Xpedition demands!\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003e\u003c\/span\u003e\u003cspan\u003eDon't think a TAPP clutch can be any smoother and more responsive than it already is? Think again. The all-new Roller Spider design for TAPP Primary Clutches replaces the original button spider assembly for instant power delivery due to the reduction in friction between the spider and movable sheave. This results in even better belt grip than before, lower belt temps, better belt life, and buttery smooth engagement that's guaranteed to keep your car dialed in any riding condition.\u003c\/span\u003e The patent-pending TAPP Roller Primary Clutch is the next revolution in clutching technology.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eUPDATED FEATURES:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eROLLER SPIDER DESIGN:\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003ecreates less friction in the movable sheave compared to button spiders for a much more responsive setup\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCENTER BEARING: \u003c\/strong\u003eNEW black nitrate coating (black finish) adds an extra layer of hardness, prevents rust corrosion, and reduces friction for even smoother clutch operation\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePOST: \u003c\/strong\u003eupdated with additional material and new heat-treating process, allowing the clutch to be over-torqued from factory specs by preventing the clutch from slipping on the shaft (necessary for high-horsepower builds and\/or drag racing setups)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMOVEABLE SHEAVE: \u003c\/strong\u003eadded material with the new roller spider design, reinforcing the clutch towers for greater load-bearing capabilities\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCLUTCH COVER:\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003ethe billet aluminum clutch cover now features larger \"windows\" to allow additional weight without having to modify the clutch cover\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eADDITIONAL TAPP CLUTCH FEATURES:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eDURABLE PERFORMANCE: \u003c\/strong\u003eTAPP clutches are built from billet aluminum and other high-tech materials that can withstand extreme heat and extend clutch life, so you can spend more time riding and less time in the shop. EVP has used TAPP clutches on our all-out drag race Can-Am X3 and Polaris XPT vehicles with very high engagement launches without failure. The OEM primary clutch is reliable up to about 300 hp, but an EVP Spec TAPP primary can easily handle anything from 200-500+ hp and all terrain and riding styles - drag race, duning, trail riding, rock crawling, short course and desert racing - all with the unrivaled quality, durability and performance expected out of a TAPP Clutch.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eADJUSTABLE \u0026amp; VERSATILE: \u003c\/strong\u003eTAPP clutches are a game-changer when it comes to tuning and adjustability, allowing your clutch to easily evolve as your UTV's power level evolves. The two-sided ramps are swapped in minutes with just an Allen wrench. The clickers are adjusted externally, which can raise or lower the entire shift pattern easily. The roller arms allow mass to be added or removed by removing the clutch cover, and there are a variety of TAPP and EVP primary springs available for fine-tuning. Lastly, the TAPP clutch is also extremely forgiving, allowing a wide variety of helix angles to work with a given primary clutch calibration.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCOOLER TEMPS: \u003c\/strong\u003eTAPP primary clutches run cooler than any clutch on the market. High-tech materials, extensive venting for optimum airflow, and cooler belt temperatures thanks to the multi-angle curved sheaves all contribute to extending belt and overall clutch life‚ even under the most demanding abuse.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eINSTANT THROTTLE RESPONSE: \u003c\/strong\u003eTAPP primary clutches are intended for customers that demand responsiveness and durability from their CVT drive system whether their UTV is relatively stock or all-out big turbo drag race trim. The centralized mass and lightweight, low-inertia design coupled with multi-angled curved sheaves and custom ramp angles deliver unbeatable belt grip, instantaneous throttle response and surefire power to the ground.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSMOOTH, QUIET OPERATION: \u003c\/strong\u003eThe arms don't 'swing out' like a traditional flyweight but instead ride on a ramp system, which allows the clutch to be remarkably smooth and perform with minimal vibration. You will feel and hear the difference.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003e\u003cem\u003eDisclaimer:\u003c\/em\u003e\u003c\/strong\u003e\u003cem\u003e EVP only offers Tech Support for EVP.MOde Spec TAPP clutches purchased directly from EVP. All EVP Calibrated Tapp Clutch primaries may require minor calibration changes. If you need tuning support, please reference our instructions page or contact our technical department. \u003c\/em\u003e\u003c\/p\u003e\n\u003cp\u003eQuestions? Give us a call! EVP Team members are available from 8:30am to 5:00pm CST and can help dial in the perfect clutch for your setup: (715) 247-3862.\u003c\/p\u003e\n\u003ch1\u003eCALIBRATION GUIDE\u003c\/h1\u003e\n\u003cp style=\"margin: 0in;\" class=\"c16\"\u003e\u003cspan class=\"c0\"\u003e\u003cspan style=\"font-family: 'Arial',sans-serif; color: black;\"\u003eThere are 4 main adjustable components in an EVP Spec TAPP Clutch, these are:\u003c\/span\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp style=\"margin: 0in;\" class=\"c16\"\u003e \u003c\/p\u003e\n\u003cp style=\"margin: 0in; text-align: justify;\" class=\"c22\"\u003e\u003cspan class=\"c5\"\u003e\u003cb\u003e\u003cspan style=\"font-family: 'Arial',sans-serif; color: black;\"\u003eRamp \u003c\/span\u003e\u003c\/b\u003e\u003c\/span\u003e\u003cspan class=\"c2\"\u003e\u003cb\u003e\u003cspan style=\"font-family: 'Arial',sans-serif; color: black;\"\u003eP\u003c\/span\u003e\u003c\/b\u003e\u003c\/span\u003e\u003cspan class=\"c5\"\u003e\u003cb\u003e\u003cspan style=\"font-family: 'Arial',sans-serif; color: black;\"\u003erofile\u003c\/span\u003e\u003c\/b\u003e\u003c\/span\u003e\u003cspan class=\"c5\"\u003e\u003cspan style=\"font-family: 'Arial',sans-serif; color: black;\"\u003e - \u003c\/span\u003e\u003c\/span\u003e\u003cspan class=\"c0\"\u003e\u003cspan style=\"font-family: 'Arial',sans-serif; color: black;\"\u003eYour TAPP clutch comes with a set of pre-chosen ramps that have been tested in many scenarios and have been deemed to be the most generic in most situations. Changing the angle or profile of the ramp will have many effects on the shift profile. This should only be done by an experienced tuner; you will likely not need to change this.\u003c\/span\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp style=\"margin: 0in; text-align: justify;\" class=\"c22\"\u003e \u003c\/p\u003e\n\u003cp style=\"margin: 0in; text-align: justify;\" class=\"c22\"\u003e\u003cspan class=\"c5\"\u003e\u003cb\u003e\u003cspan style=\"font-family: 'Arial',sans-serif; color: black;\"\u003eRamp \u003c\/span\u003e\u003c\/b\u003e\u003c\/span\u003e\u003cspan class=\"c2\"\u003e\u003cb\u003e\u003cspan style=\"font-family: 'Arial',sans-serif; color: black;\"\u003eA\u003c\/span\u003e\u003c\/b\u003e\u003c\/span\u003e\u003cspan class=\"c5\"\u003e\u003cb\u003e\u003cspan style=\"font-family: 'Arial',sans-serif; color: black;\"\u003engle\u003c\/span\u003e\u003c\/b\u003e\u003c\/span\u003e\u003cspan class=\"c5\"\u003e\u003cspan style=\"font-family: 'Arial',sans-serif; color: black;\"\u003e - \u003c\/span\u003e\u003c\/span\u003e\u003cspan style=\"font-family: 'Arial',sans-serif; color: black;\"\u003eThe ramp angle in your TAPP Clutch is adjustable from the outside via the use of the Quick Shift Bolts. As with other clicker style clutches, the higher the number, the higher the RPM. This will mainly affect the full shift speed but also affects the engagement and low speed slightly. \u003cspan class=\"c2\"\u003e\u003cb\u003eIMPORTANT\u003c\/b\u003e\u003c\/span\u003e \u003cspan class=\"c14\"\u003e\u003cb\u003e- Always adjust the ramp angle in pairs across from each other. If you do not, the clutch will be out of balance.\u003c\/b\u003e\u003c\/span\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp style=\"margin: 0in; text-align: justify;\" class=\"c22\"\u003e \u003c\/p\u003e\n\u003cp style=\"margin: 0in; text-align: justify;\" class=\"c19\"\u003e\u003cspan class=\"c5\"\u003e\u003cb\u003e\u003cspan style=\"font-family: 'Arial',sans-serif; color: black;\"\u003eRoller \u003c\/span\u003e\u003c\/b\u003e\u003c\/span\u003e\u003cspan class=\"c2\"\u003e\u003cb\u003e\u003cspan style=\"font-family: 'Arial',sans-serif; color: black;\"\u003eS\u003c\/span\u003e\u003c\/b\u003e\u003c\/span\u003e\u003cspan class=\"c5\"\u003e\u003cb\u003e\u003cspan style=\"font-family: 'Arial',sans-serif; color: black;\"\u003eize\u003c\/span\u003e\u003c\/b\u003e\u003c\/span\u003e\u003cspan class=\"c5\"\u003e\u003cspan style=\"font-family: 'Arial',sans-serif; color: black;\"\u003e - \u003c\/span\u003e\u003c\/span\u003e\u003cspan style=\"font-family: 'Arial',sans-serif; color: black;\"\u003eYour clutch was shipped with a predetermined roller size for your application. There are 3 sizes of rollers available: standard, 1mm oversize, and 2mm oversize. Bigger rollers make the low end \"quicker RPM's\" but shift out quicker and lower the full shift RPM. Smaller rollers make the engine slower shift and raise the full shift RPM. This has to do with the angle of the arms combined with the weight difference of the rollers. \u003cspan class=\"c2\"\u003e\u003cb\u003eIMPORTANT\u003c\/b\u003e\u003c\/span\u003e \u003cspan class=\"c2\"\u003e\u003cb\u003e- As with the ramp angle, roller size must be done in pairs across from each other. Failure to do so will result in an imbalance of the clutch and possibly failure.\u003c\/b\u003e\u003c\/span\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp style=\"margin: 0in; text-align: justify;\" class=\"c19\"\u003e \u003c\/p\u003e\n\u003cp style=\"margin: 0in; text-align: justify;\" class=\"c22\"\u003e\u003cspan class=\"c5\"\u003e\u003cb\u003e\u003cspan style=\"font-family: 'Arial',sans-serif; color: black;\"\u003eWeight \u003c\/span\u003e\u003c\/b\u003e\u003c\/span\u003e\u003cspan class=\"c2\"\u003e\u003cb\u003e\u003cspan style=\"font-family: 'Arial',sans-serif; color: black;\"\u003eA\u003c\/span\u003e\u003c\/b\u003e\u003c\/span\u003e\u003cspan class=\"c5\"\u003e\u003cb\u003e\u003cspan style=\"font-family: 'Arial',sans-serif; color: black;\"\u003edjustment\u003c\/span\u003e\u003c\/b\u003e\u003c\/span\u003e\u003cspan style=\"font-family: 'Arial',sans-serif; color: black;\"\u003e - The weight in the arms can be adjusted in two ways: set screws in the arms, and washers on the roller thru bolt. As with all other clutches, add weight to lower RPM, remove weight to raise RPM. Set screws in the arms affect the low-speed shift points more than the high speed and will reduce the max RPM, and weight on the roller bolt acts like tip weight in a conventional clutch affecting the high speed more than any other part of the curve. Adjust this as needed for your application. \u003cspan class=\"c14\"\u003e\u003cb\u003eIMPORTANT - As with all other adjustments, do this evenly and only in pairs across from each other, failure to do so will result in an imbalance of the clutch and possible failure.\u003c\/b\u003e\u003c\/span\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003ch1\u003eFITMENT\u003c\/h1\u003e\n\u003cp\u003e2024+ Polaris Xpedition\u003c\/p\u003e\n\u003ch1\u003eINSTRUCTIONS\u003c\/h1\u003e","brand":"TAPP","offers":[{"title":"2024+ Xpedition NA 2200 RPM","offer_id":41570021670958,"sku":"2282020022","price":2700.0,"currency_code":"USD","in_stock":true},{"title":"2024+ Xpedition XT-170 Turbo 2300 RPM","offer_id":41576174387246,"sku":"2282020025","price":2700.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0054\/6786\/5134\/files\/tapp_clutch_1_2e350496-8133-466a-9338-065c47574be1.jpg?v=1708458111"},{"product_id":"evp-tapp-roller-primary-clutch-kit-for-kawasaki-teryx-h2","title":"EVP TAPP Roller Primary Clutch for Kawasaki Teryx H2","description":"\u003ch1\u003eDESCRIPTION\u003c\/h1\u003e\n\u003cp\u003e\u003cspan\u003e\u003c\/span\u003e\u003cspan\u003eThe Kawasaki H2 is a badass machine, but the OEM clutching hampers it. The stock three-arm clutch works well, but it is 1970s technology. The Patented TAPP Primary Clutch is an upgrade in both technology, adjustability, belt life, and smoothness.  Engineered specifically for the H2 and its high-revving nature, the TAPP Primary will help get you dialed in regardless of your riding style, tire size, or elevation.\u003c\/span\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFEATURES:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eROLLER SPIDER DESIGN:\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003ecreates less friction in the movable sheave compared to button spiders for a much more responsive setup\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCENTER BEARING: \u003c\/strong\u003eNEW black nitrate coating (black finish) adds an extra layer of hardness, prevents rust corrosion, and reduces friction for even smoother clutch operation\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLARGER ROLLER:\u003c\/strong\u003e roller size has been increased from 2mm to 3mm, making a huge difference in longevity of the clutch bearing particularly under high horsepower and harsh conditions\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePOST: \u003c\/strong\u003eupdated with additional material and new heat-treating process, allowing the clutch to be over-torqued from factory specs by preventing the clutch from slipping on the shaft (necessary for high-horsepower builds and\/or drag racing setups)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMOVEABLE SHEAVE: \u003c\/strong\u003eadded material with the new roller spider design, reinforcing the clutch towers for greater load-bearing capabilities\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCLUTCH COVER:\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003ethe billet aluminum clutch cover now features larger \"windows\" to allow additional weight without having to modify the clutch cover\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFAN BLADE KIT: \u003c\/strong\u003eincluded on TAPP Primary to reduce operating temperature of your clutch by forcing cooler air from outside to the internal components inside the clutch\u003c\/li\u003e\n\u003cli\u003e\n\u003cmeta charset=\"utf-8\"\u003e \u003cstrong\u003eHORSEPOWER \u0026amp; ENGAGEMENT: \u003c\/strong\u003eKawasaki TAPP Primary Clutch Assembly includes calibrations for Stock, EVP Stage 3-91, and Stage 4-100 Tuning at 2200 RPM and 3000 RPM Engagement\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp class=\"p1\"\u003eEVP has developed, tested, and fine-tuned the perfect TAPP primary clutch calibration for the Kawasaki H2, delivering bolt-on performance and responsiveness you will feel at first pull. Faster acceleration, higher top speeds, amazing zero to 60 mph pulls holding higher RPMs over stock, and no clutch chatter.\u003c\/p\u003e\n\u003cp class=\"p1\"\u003eCalibrated for use with the bone-stock H2 secondary clutch or TAPP Secondary Clutch (HIGHLY RECOMMENDED FOR THE H2!), additional TAPP Clutch features include cooler operating temperatures to extend clutch and belt life, responsive power put down via excellent belt grip, and easily adjustable weight profiles that allow your TAPP to evolve as your H2's power level evolves. From navigating technical terrain to sand dunes or casually cruising, you're guaranteed to feel the difference an EVP Spec TAPP primary clutch makes.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eADDITIONAL TAPP CLUTCH FEATURES:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eDURABLE PERFORMANCE: \u003c\/strong\u003eDesigned with the durability that high-horsepower UTV's demand, TAPP clutches are built from billet aluminum and other high-tech materials that can withstand extreme heat and extend clutch life, so you can spend more time riding and less time in the shop. EVP has used TAPP clutches on our all-out drag race Can Am X3 and Polaris XPT vehicles with very high engagement launches without failure. The OEM primary clutch is reliable up to about 300 hp, but an EVP Spec TAPP primary can easily handle anything from 200-500+ hp and all terrain and riding styles - drag race, duning, trail riding, rock crawling, short course and desert racing - all with the unrivaled quality, durability and performance expected out of a TAPP Clutch.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eADJUSTABLE \u0026amp; VERSATILE: \u003c\/strong\u003eTAPP clutches are a game-changer when it comes to tuning and adjustability, allowing your clutch to easily evolve as your UTV's power level evolves. The two-sided ramps are swapped in minutes with just an Allen wrench. The clickers are adjusted externally, which can raise or lower the entire shift pattern easily. The roller arms allow mass to be added or removed by removing the clutch cover, and there are a variety of TAPP and EVP primary springs available for fine-tuning. Lastly, the TAPP clutch is also extremely forgiving, allowing a wide variety of helix angles to work with a given primary clutch calibration.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCOOLER TEMPS: \u003c\/strong\u003eTAPP primary clutches run cooler than any clutch on the market. High-tech materials, extensive venting for optimum airflow, and cooler belt temperatures thanks to the multi-angle curved sheaves all contribute to extending belt and overall clutch life‚ even under the most demanding abuse.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eINSTANT THROTTLE RESPONSE: \u003c\/strong\u003eTAPP primary clutches are intended for customers that demand responsiveness and durability from their CVT drive system whether their UTV is relatively stock or all-out big turbo drag race trim. The centralized mass and lightweight, low-inertia design coupled with multi-angled curved sheaves and custom ramp angles deliver unbeatable belt grip, instantaneous throttle response and surefire power to the ground.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSMOOTH, QUIET OPERATION:\u003c\/strong\u003e The arms don't 'swing out' like a traditional flyweight but instead ride on a ramp system, which allows the clutch to be remarkably smooth and perform with minimal vibration. You will feel and hear the difference.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eRunning a non-EVP tune and still want to enjoy all the benefits and performance of an EVP Spec TAPP primary clutch? No problem! TAPP clutches are renowned for being incredibly easy to tune and adjust. RPM engagement can be increased simply by flipping the ramps from side A to side B. Flipping two ramps to side B will increase engagement by 600-800 RPM, flipping all four ramps to side B can increase engagement even higher. Additionally, the adjustable clicker bolts can raise or lower engagement by 50-RPM increments for further fine-tuning.\u003c\/p\u003e\n\u003cp\u003e\u003cem\u003e\u003cstrong\u003eDISCLAIMER:\u003c\/strong\u003e All EVP Calibrated TAPP Clutch primaries may require minor calibration changes. If you need tuning support, please reference our instructions page or contact our technical department.\u003c\/em\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eAll EVP TAPP primary clutch kits include full standard weight kit as well as tungsten TAPP Clutch Race Weights (set of 8).\u003c\/strong\u003e\u003c\/p\u003e\n\u003ch1\u003eCLUTCH CALIBRATION GUIDE\u003c\/h1\u003e\n\u003cp class=\"c16\" style=\"margin: 0in;\"\u003e\u003cspan class=\"c0\"\u003e\u003cspan style=\"font-family: 'Arial',sans-serif; color: black;\"\u003eThere are 4 main adjustable components in an EVP Spec TAPP Clutch, these are:\u003c\/span\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp class=\"c22\" style=\"margin: 0in; text-align: justify;\"\u003e\u003cspan class=\"c5\"\u003e\u003cb\u003e\u003cspan style=\"font-family: 'Arial',sans-serif; color: black;\"\u003eRamp \u003c\/span\u003e\u003c\/b\u003e\u003c\/span\u003e\u003cspan class=\"c2\"\u003e\u003cb\u003e\u003cspan style=\"font-family: 'Arial',sans-serif; color: black;\"\u003eP\u003c\/span\u003e\u003c\/b\u003e\u003c\/span\u003e\u003cspan class=\"c5\"\u003e\u003cb\u003e\u003cspan style=\"font-family: 'Arial',sans-serif; color: black;\"\u003erofile\u003c\/span\u003e\u003c\/b\u003e\u003c\/span\u003e\u003cspan class=\"c5\"\u003e\u003cspan style=\"font-family: 'Arial',sans-serif; color: black;\"\u003e - \u003c\/span\u003e\u003c\/span\u003e\u003cspan class=\"c0\"\u003e\u003cspan style=\"font-family: 'Arial',sans-serif; color: black;\"\u003eYour TAPP clutch comes with a set of pre-chosen ramps that have been tested in many scenarios and have been deemed to be the most generic in most situations. Changing the angle or profile of the ramp will have many effects on the shift profile. This should only be done by an experienced tuner; you will likely not need to change this.\u003c\/span\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp class=\"c22\" style=\"margin: 0in; text-align: justify;\"\u003e \u003c\/p\u003e\n\u003cp class=\"c22\" style=\"margin: 0in; text-align: justify;\"\u003e\u003cspan class=\"c5\"\u003e\u003cb\u003e\u003cspan style=\"font-family: 'Arial',sans-serif; color: black;\"\u003eRamp \u003c\/span\u003e\u003c\/b\u003e\u003c\/span\u003e\u003cspan class=\"c2\"\u003e\u003cb\u003e\u003cspan style=\"font-family: 'Arial',sans-serif; color: black;\"\u003eA\u003c\/span\u003e\u003c\/b\u003e\u003c\/span\u003e\u003cspan class=\"c5\"\u003e\u003cb\u003e\u003cspan style=\"font-family: 'Arial',sans-serif; color: black;\"\u003engle\u003c\/span\u003e\u003c\/b\u003e\u003c\/span\u003e\u003cspan class=\"c5\"\u003e\u003cspan style=\"font-family: 'Arial',sans-serif; color: black;\"\u003e - \u003c\/span\u003e\u003c\/span\u003e\u003cspan style=\"font-family: 'Arial',sans-serif; color: black;\"\u003eThe ramp angle in your TAPP Clutch is adjustable from the outside via the use of the Quick Shift Bolts. As with other clicker style clutches, the higher the number, the higher the RPM. This will mainly affect the full shift speed but also affects the engagement and low speed slightly. \u003cspan class=\"c2\"\u003e\u003cb\u003eIMPORTANT\u003c\/b\u003e\u003c\/span\u003e \u003cspan class=\"c14\"\u003e\u003cb\u003e- Always adjust the ramp angle in pairs across from each other. If you do not, the clutch will be out of balance.\u003c\/b\u003e\u003c\/span\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp class=\"c22\" style=\"margin: 0in; text-align: justify;\"\u003e \u003c\/p\u003e\n\u003cp class=\"c19\" style=\"margin: 0in; text-align: justify;\"\u003e\u003cspan class=\"c5\"\u003e\u003cb\u003e\u003cspan style=\"font-family: 'Arial',sans-serif; color: black;\"\u003eRoller \u003c\/span\u003e\u003c\/b\u003e\u003c\/span\u003e\u003cspan class=\"c2\"\u003e\u003cb\u003e\u003cspan style=\"font-family: 'Arial',sans-serif; color: black;\"\u003eS\u003c\/span\u003e\u003c\/b\u003e\u003c\/span\u003e\u003cspan class=\"c5\"\u003e\u003cb\u003e\u003cspan style=\"font-family: 'Arial',sans-serif; color: black;\"\u003eize\u003c\/span\u003e\u003c\/b\u003e\u003c\/span\u003e\u003cspan class=\"c5\"\u003e\u003cspan style=\"font-family: 'Arial',sans-serif; color: black;\"\u003e - \u003c\/span\u003e\u003c\/span\u003e\u003cspan style=\"font-family: 'Arial',sans-serif; color: black;\"\u003eYour clutch was shipped with a predetermined roller size for your application. There are 3 sizes of rollers available: standard, 1mm oversize, and 2mm oversize. Bigger rollers make the low end \"quicker RPM's\" but shift out quicker and lower the full shift RPM. Smaller rollers make the engine slower shift and raise the full shift RPM. This has to do with the angle of the arms combined with the weight difference of the rollers. \u003cspan class=\"c2\"\u003e\u003cb\u003eIMPORTANT\u003c\/b\u003e\u003c\/span\u003e \u003cspan class=\"c2\"\u003e\u003cb\u003e- As with the ramp angle, roller size must be done in pairs across from each other. Failure to do so will result in an imbalance of the clutch and possibly failure.\u003c\/b\u003e\u003c\/span\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp class=\"c19\" style=\"margin: 0in; text-align: justify;\"\u003e \u003c\/p\u003e\n\u003cp class=\"c22\" style=\"margin: 0in; text-align: justify;\"\u003e\u003cspan class=\"c5\"\u003e\u003cb\u003e\u003cspan style=\"font-family: 'Arial',sans-serif; color: black;\"\u003eWeight \u003c\/span\u003e\u003c\/b\u003e\u003c\/span\u003e\u003cspan class=\"c2\"\u003e\u003cb\u003e\u003cspan style=\"font-family: 'Arial',sans-serif; color: black;\"\u003eA\u003c\/span\u003e\u003c\/b\u003e\u003c\/span\u003e\u003cspan class=\"c5\"\u003e\u003cb\u003e\u003cspan style=\"font-family: 'Arial',sans-serif; color: black;\"\u003edjustment\u003c\/span\u003e\u003c\/b\u003e\u003c\/span\u003e\u003cspan style=\"font-family: 'Arial',sans-serif; color: black;\"\u003e - The weight in the arms can be adjusted in two ways: set screws in the arms, and washers on the roller thru bolt. As with all other clutches, add weight to lower RPM, remove weight to raise RPM. Set screws in the arms affect the low-speed shift points more than the high speed and will reduce the max RPM, and weight on the roller bolt acts like tip weight in a conventional clutch affecting the high speed more than any other part of the curve. Adjust this as needed for your application. \u003cspan class=\"c14\"\u003e\u003cb\u003eIMPORTANT - As with all other adjustments, do this evenly and only in pairs across from each other, failure to do so will result in an imbalance of the clutch and possible failure.\u003c\/b\u003e\u003c\/span\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003ch1\u003eFITMENT\u003c\/h1\u003e\n\u003cp\u003e2026 Kawasaki Teryx H2 Models\u003c\/p\u003e\n\u003ch1\u003eINSTRUCTIONS\u003c\/h1\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0054\/6786\/5134\/files\/2026_Kawasaki_H2_TAPP_Primary_Secondary_Clutches_66a5f3cd-c6cd-44eb-8284-6dd53abf514a.pdf?v=1773861697\" title=\"2026 Kawasaki H2 TAPP Primary \u0026amp; Secondary Clutches\" rel=\"noopener\" target=\"_blank\"\u003eTAPP Primary \u0026amp; Secondary Clutch Instructions\u003c\/a\u003e\u003c\/p\u003e","brand":"TAPP","offers":[{"title":"Black \/ 250-295 HP (2200 RPM)","offer_id":41676325519406,"sku":"2282030014","price":2800.0,"currency_code":"USD","in_stock":true},{"title":"Black \/ 250-295 HP (3000 RPM)","offer_id":42051290333230,"sku":"2282030003","price":2800.0,"currency_code":"USD","in_stock":true},{"title":"Green \/ 250-295 HP (2200 RPM)","offer_id":41676325552174,"sku":"2282030015","price":2800.0,"currency_code":"USD","in_stock":true},{"title":"Green \/ 250-295 HP (3000 RPM)","offer_id":42051290365998,"sku":"2282030005","price":2800.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0054\/6786\/5134\/files\/2282030003_2282030005_tt_1.jpg?v=1769465018"},{"product_id":"tapp-secondary-clutch-for-kawasaki-teryx-h2","title":"TAPP Secondary Clutch for Kawasaki Teryx H2","description":"\u003ch1\u003eDESCRIPTION\u003c\/h1\u003e\n\u003cp\u003e\u003cspan data-olk-copy-source=\"MessageBody\"\u003e\u003cmeta charset=\"utf-8\"\u003e \u003cstrong\u003e\u003ci\u003eEVP DISCLAIMER:\u003c\/i\u003e \u003c\/strong\u003e\u003ci\u003e\u003cspan\u003eThe EVP TAPP Secondary has the helix and spring on the outward facing side of the clutch, whereas the OEM secondary has these components facing the transmission. An \u003ca rel=\"noopener\" href=\"https:\/\/evopowersports.com\/products\/evp-clutch-cover-spacer-kit-for-kawasaki-teryx-h2\" target=\"_blank\"\u003eEVP Clutch Cover Spacer Kit\u003c\/a\u003e is recommended for H2 TAPP secondary clutches, which allows the OEM clutch cover to fit and will keep debris out. \u003c\/span\u003e\u003c\/i\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan data-olk-copy-source=\"MessageBody\"\u003eKawasaki gave the SXS community a great vehicle with a mediocre secondary clutch with many inherent problems that translate into poor performance and very high belt temperatures. The EVP TAPP secondary solves all the issues present in the OEM clutch!\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan data-olk-copy-source=\"MessageBody\"\u003eThe OEM secondary clutch uses an extremely steep helix with a massive spring to control belt tension. The EVP TAPP secondary uses the proper dual angle helix along with an adjustable torsional\/compression style spring. The helix ramps are easily replaced to fine tune the clutch shift characteristics if needed, whereas the OEM clutch has no provision for changing the helix angle. The OEM secondary has no cooling fins whatsoever and has an enclosed steel helix\/shaft that builds heat and transfers it to the belt. TAPP has cooling fins machined into the sheaves along with an open helix\/spring combination made from aluminum, which efficiently \u003cmeta charset=\"utf-8\"\u003edissipates heat and keeps the belt cooler. Lastly, the OEM secondary contains grease inside of the spring\/helix assembly. This leaks out and is flung onto the belt\/primary clutch and clutch cover when hot. Grease and CVT systems are not compatible.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eThe EVP TAPP secondary clutch, alone with no other changes, demonstrated a vast improvement in shift characteristics, belt temperature, and life over stock. EVP TAPP secondary, EVP primary clutch weight kit, and the EVP Worlds Best Belt are the ultimate in shift characteristics, getting power to the ground and extending belt life.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFEATURES\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul type=\"disc\"\u003e\n\u003cli\u003e\n\u003cstrong\u003eOversize Helix Diameter: \u003c\/strong\u003eMaximizes the clamping force on the belt. One of the largest issues with existing designs is that a small hub limits both the spring coil diameter as well as the maximum force the helix can apply to the belt. Big horsepower cars no longer have to run a double spring.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLarger Helix Surface: \u003c\/strong\u003eAllows the use of wider rollers that can better distribute the tremendous loads they experience. This is especially true under drag race conditions. We are happy to report that we have put hundreds of runs on a set of rollers with full on 5000 RPM high boost launches. These drag race launches will damage or destroy all other clutch rollers within a few runs.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eReplaceable Helix Ramps:\u003c\/strong\u003e TAPP engineered an elegant solution so only parts of the helix ramps need to be changed when you want to change helix angles. \u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTorsionally Adjustable Spring Tension: \u003c\/strong\u003eThe design utilizes a torsional style helix cap with adjustable slots which allow the spring torsional tension to be used as a tuning feature.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUnmatched Performance:\u003c\/strong\u003e All of these design features add up to power, performance and longer belt life. At the 400 wheel horsepower level, just by changing to the TAPP secondary we were able to get another 15-20 horsepower to the wheels. Whether you are trail riding, dunning or racing, belt life will be extended when using a properly calibrated TAPP Clutch.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e\u003cmeta charset=\"utf-8\"\u003e\u003c\/strong\u003e\u003cspan data-olk-copy-source=\"MessageBody\"\u003eThe EVP TAPP Secondary has the helix and spring on the outward facing side of the clutch, whereas the OEM secondary has these components facing the transmission. An \u003cstrong\u003e\u003ca href=\"https:\/\/evopowersports.com\/products\/evp-clutch-cover-spacer-kit-for-kawasaki-teryx-h2\" rel=\"noopener\" target=\"_blank\"\u003eEVP Clutch Cover Spacer Kit\u003c\/a\u003e\u003c\/strong\u003e is recommended for H2 TAPP secondary clutches, which allows the OEM clutch cover to fit and will keep debris out. \u003c\/span\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch1\u003eFITMENT\u003c\/h1\u003e\n\u003cp\u003e2026 Kawasaki Teryx H2\u003c\/p\u003e\n\u003ch1\u003eINSTRUCTIONS\u003c\/h1\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0054\/6786\/5134\/files\/2026_Kawasaki_H2_TAPP_Primary_Secondary_Clutches_66a5f3cd-c6cd-44eb-8284-6dd53abf514a.pdf?v=1773861697\" title=\"2026 Kawasaki H2 TAPP Primary \u0026amp; Secondary Clutches\" rel=\"noopener\" target=\"_blank\"\u003eTAPP Secondary \u0026amp; Primary Clutch Instructions\u003c\/a\u003e\u003c\/p\u003e\n\u003ch1\u003eTAPP WARRANTY\u003c\/h1\u003e\n\u003cp\u003eFor warranty information, please contact TAPP online \u003ca href=\"https:\/\/tappclutch.com\/en-us\/pages\/contact-us\" rel=\"noopener\" target=\"_blank\"\u003ehere\u003c\/a\u003e.\u003c\/p\u003e\n\u003c!----\u003e","brand":"TAPP","offers":[{"title":"Green","offer_id":41967129493550,"sku":"2282030021","price":1904.0,"currency_code":"USD","in_stock":true},{"title":"Black","offer_id":41967129526318,"sku":"2282030022","price":1900.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0054\/6786\/5134\/files\/2282030006_tt_1.jpg?v=1766437234"}],"url":"https:\/\/evopowersports.com\/collections\/complete-clutches.oembed","provider":"Evolution Powersports","version":"1.0","type":"link"}