Adding Air Fuel Module and Belt Temp Modules allows both AFR and Belt Temperature to be broadcasted to the dash for a complete 3-in-1 gauge solution.
With the EVP Dash Flash, displaying boost pressure on the OEM dash cluster does not require any additional wiring or modules. But by adding one or both of our accessory modules* (AFR or Belt Temp) your dash can now also display Belt Temperature and Air Fuel Ratios. Additionally, our CodeShooter Device allows the ability to Live Monitor AFR/Belt Temp directly in the app as well as on the dash!
With the CodeShooter Device and modules, you can now live monitor AFR/Belt Temp directly in the app!
BELT TEMPERATURE MODULE - $225
Included:
- 12v power/CANBus cable
- Infrared sensor pigtail
- 15ft wiring harness
- Module and mounting velcro
- PnP Adapter harness
Note: For maximum belt life, try to avoid temperatures in excess of 200-225 F.
AIR/FUEL RATIO MODULE - $250
Included:
- Bosch LSU 4.9 02 Lamda Sensor with pigtail
- 10ft wiring harness
- Auxiliary 02 bung
- PnP Adapter harness
- CAN Lamda Module
*Port Replicator required for use with either module.
The Air Fuel Module plugs into the diagnostic port and displays AFR values on the dash. It requires an extra 02 bung (supplied) to be welded into the exhaust system. No additional wiring other than plugging the module into the OEM diagnostic port and running the supplied 10’ cable to the included Bosch LSU 4.9 02 sensor. Our port replicator allows both modules to be connected along with a 3rd open port for the OEM BUDS or Flashing Device to be connected.
ADDING AIR FUEL MODULE AND BELT TEMP MODULES ALLOWS BOTH AFR AND BELT TEMPERATURE TO BE BROADCASTED TO THE CODESHOOTER APP FOR DIANOSTICS & TESTING.
Our CodeShooter Device allows the ability to Live Monitor AFR/Belt Temp directly in the app.